3D Printing InfoPrinter comparison
Anycubic Kobra 3 Combo vs Voron 2.4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 3 Combo comparisonsMore Voron 2.4 comparisons
| Property | Anycubic Kobra 3 ComboBEDSLINGER | Voron 2.4COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Voron Design |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 3 Combo - the Kobra 3 sold together with the ACE Pro filament unit[1] | Voron 2.4, current revision R2, kits shipping as Rev D and Rev D+. Sold as "Voron 2.4 R2 (Rev D+) 3D Printer Kit by LDO"[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 30 April 2024 (Shopify publish date)[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $329.00 with a US plug on store.anycubic.com, Aug 2026 ($355.00 for the EU plug variant)[4] | $1,399.99 for the LDO Rev D+ kit at Fabreeko (300 mm and 350 mm are the same price), on pre-order with a mid-September estimate, checked Aug 2026. Fabreeko's live feed shows the base 2.4 kit listing at $1,299.99 and available. 3DJake lists an LDO 350 RevD kit but will not ship to the US[2][5][6] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two things to watch here. First, the Combo is printer plus ACE Pro; the ACE Pro alone weighs 4.6 kg and measures 366 x 283 x 235 mm, so plan bench space for both. Second, Anycubic's own specification table on this page mixes generations - the weight row reads "Kobra 3 V2 - 9.2kg" while the package row reads "Kobra 3 - 12kg", and a separate Kobra 3 V2 Combo product is listed at the same price. Treat any single figure from this page as needing confirmation against the exact SKU[1][4][7] | Sizes 250, 300 and 350 mm; LDO ships Rev D and Rev D+. Colours black, space grey, blue. Do not confuse with the Trident: the 2.4 lifts the whole gantry on four belted Z motors, the Trident lifts the bed on three screws. The Rev D+ kit includes a Raspberry Pi 4B; the older 3DJake-listed RevD kit explicitly does not include a Pi[2][3][6][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 250 x 260 mm; Anycubic quotes a 16.25 L maximum printing volume[1] | 300 x 300 x 300 mm or 350 x 350 x 350 mm. Sortable value is the 350 mm kit[2][3][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 452.9 x 504.7 x 483 mm for the printer; the ACE Pro is a separate 365.94 x 282.84 x 234.5 mm box[1] | Not documented |
| Net weight (kg) | Anycubic's table gives "Kobra 3 V2 - 9.2kg" for the machine weight and "Kobra 3 - 12kg" for the package weight, plus 4.6 kg for the ACE Pro - the two rows do not refer to the same thing, so treat 9.2 kg as the machine and 12 kg as shipping weight[1] | Not documented |
| Frame construction & material | Not documented | Blind-joint aluminium-extrusion frame with a complete panel set; stainless-steel linear rails throughout[3][6] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed by the supplied panel set. A Nevermore Micro V5 internal circulation filter is included in the LDO kit[6] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's specification table gives the construction as "Gantry System" - it is a bed-slinger, not the CoreXY layout used by the Kobra S1 series[1][9] | CoreXY on linear rails, with a belted flying gantry on four Z motors[3][2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers, ready for 48 V upgrades[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), with 300 mm/s recommended[1] | Not documented |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended (manufacturer claims)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive (Anycubic's term is "short distance extrusion")[1] | Clockwork 2 with a Bondtech BMG / Integrated Drive Gear Assembly, in a Stealthburner toolhead[2][3][6] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 300 C quick-release hotend; 0.4 mm standard nozzle, expandable to 0.6 and 0.8 mm[1] | E3D Revo Voron (24 V), all-metal, high-flow variant in the Rev D+ kit, with a 60 W heater; upgradeable to a Phaetus Rapido HF for $9.99[2][3][6] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature (manufacturer figure)[1] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater)[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C maximum hotbed temperature on a PEI spring steel build plate[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Cast 5083 aluminium plate with a magnetic base and a powder-coated PEI sheet; LDO silicone bed heater with edge-to-edge heating[3][2][6] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling with Z-offset, plus area levelling[1] | Omron inductive probe supplied; Klicky-mod parts included. Voron Tap is available as an add-on rather than standard[2][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, filament entanglement detection, nozzle clog detection and power-loss resume[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | 4-colour printing with one ACE Pro, or up to 8 colours with two units[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO x Voron Leviathan mainboard (replacing the earlier BTT Octopus), plus a Nitehawk SB USB toolhead PCB[3][2][6] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS. Anycubic's slicer, Anycubic Slicer Next, is stated to be built on the open-source Orca slicer[1] | Klipper, hosted on a Raspberry Pi 4B (included in the Fabreeko Rev D+ kit, not in the older 3DJake RevD kit)[2][3][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen with a 30-60 degree adjustable tilt[1] | 4.3-inch touchscreen included in the LDO kit[6] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Anycubic Slicer Next, the Anycubic app and USB (print only); AI spaghetti detection and object skip are supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and USB drive (print only)[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera is optional on the Kobra 3 - a 720p HD unit, not fitted as standard, unlike the Kobra S1, Kobra 4 and Kobra X[1][9][10] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED strips included[2][6] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; some parts must be printed by the user, and the LDO kit supplies pre-cut, pre-crimped cables and a heat-set insert soldering tip[6] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG and TPU, and Anycubic notes TPU is not compatible with the ACE Pro multi-material unit[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[11] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor
- LDO Voron 2.4 R2 (Rev D) kit listing matterhackers.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- LDO Motors Voron 2.4 350 RevD kit contents 3djake.com · 2026-08 · vendor
- Anycubic store 3D printers collection (current line-up and headline prices, Aug 2026) store.anycubic.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor