3D Printing InfoPrinter comparison
Anycubic Kobra 3 Combo vs Bambu Lab P2S
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 3 Combo comparisonsMore Bambu Lab P2S comparisons
| Property | Anycubic Kobra 3 ComboBEDSLINGER | Bambu Lab P2SCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Bambu Lab |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 3 Combo - the Kobra 3 sold together with the ACE Pro filament unit[1] | Bambu Lab P2S; spec sheet header "P2S Spec Sheet"[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 30 April 2024 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $329.00 with a US plug on store.anycubic.com, Aug 2026 ($355.00 for the EU plug variant)[3] | From $549.00 on the Bambu Lab US store, Aug 2026; the product page shows $749.00 with the P2S Combo variant selected[4][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two things to watch here. First, the Combo is printer plus ACE Pro; the ACE Pro alone weighs 4.6 kg and measures 366 x 283 x 235 mm, so plan bench space for both. Second, Anycubic's own specification table on this page mixes generations - the weight row reads "Kobra 3 V2 - 9.2kg" while the package row reads "Kobra 3 - 12kg", and a separate Kobra 3 V2 Combo product is listed at the same price. Treat any single figure from this page as needing confirmation against the exact SKU[1][3][6] | Two SKUs: P2S and P2S Combo (with the 2nd-generation AMS, which adds filament drying). Do not carry P1S figures across - the P2S differs on nearly every headline number: 600 vs 500 mm/s, 110 vs 100 C bed, hardened-steel vs stainless nozzle, 5-inch 854x480 touchscreen vs 2.7-inch monochrome, 14.9 vs 12.95 kg, 1920x1080 30 fps camera vs 1280x720 at 0.5 fps[2][7] |
| Market position: superseded? successor announced? | Not documented | Current model, marketed by Bambu as "The Classic Evolves" - the direct replacement for the P1S, which is still sold below it[4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 250 x 260 mm; Anycubic quotes a 16.25 L maximum printing volume[1] | 256 x 256 x 256 mm (manufacturer figure)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 452.9 x 504.7 x 483 mm for the printer; the ACE Pro is a separate 365.94 x 282.84 x 234.5 mm box[1] | 392 x 406 x 478 mm[2] |
| Net weight (kg) | Anycubic's table gives "Kobra 3 V2 - 9.2kg" for the machine weight and "Kobra 3 - 12kg" for the package weight, plus 4.6 kg for the ACE Pro - the two rows do not refer to the same thing, so treat 9.2 kg as the machine and 12 kg as shipping weight[1] | 14.9 kg net[2] |
| Frame construction & material | Not documented | Plastic and steel chassis with a plastic and glass outer frame[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with a door sensor and an activated-carbon (granulated coconut shell) filter with VOC and particulate filtration. No active chamber heater is listed[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's specification table gives the construction as "Gantry System" - it is a bed-slinger, not the CoreXY layout used by the Kobra S1 series[1][8] | CoreXY - Bambu positions the P2S as the successor to the P1S platform. The spec sheet itself does not name the kinematics[2][5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), with 300 mm/s recommended[1] | 600 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended (manufacturer claims)[1] | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 40 mm3/s standard-flow hotend, measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive (Anycubic's term is "short distance extrusion")[1] | Direct drive with hardened-steel extruder gears, driven by a Bambu Lab high-precision permanent-magnet synchronous motor rather than a plain stepper; built-in filament cutter[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 300 C quick-release hotend; 0.4 mm standard nozzle, expandable to 0.6 and 0.8 mm[1] | Hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature (manufacturer figure)[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C maximum hotbed temperature on a PEI spring steel build plate[1] | 110 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible steel plate; Textured PEI plate included, Smooth PEI Plate and Cool Plate SuperTack supported[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling with Z-offset, plus area levelling[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, filament entanglement detection, nozzle clog detection and power-loss resume[1] | Yes - run-out sensor, tangle sensor, door sensor; filament odometry with AMS[2] |
| Multi-material/multi-color capability or official upgrade path | 4-colour printing with one ACE Pro, or up to 8 colours with two units[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Part-cooling fan, hotend cooling fan and auxiliary part-cooling fan, all closed-loop controlled[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Motion controller is a dual-core Cortex-M4 plus a single-core Cortex-M7; application processor is a quad-core 1.5 GHz ARM A7 with a 2 TOPS neural processing unit. Board model and chip markings not published[2] |
| Total rated power draw | Not documented | 100-120 VAC / 200-240 VAC 50/60 Hz; max 1200 W at 220 V, 1000 W at 110 V; steady state 200 W printing PLA[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS. Anycubic's slicer, Anycubic Slicer Next, is stated to be built on the open-source Orca slicer[1] | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen with a 30-60 degree adjustable tilt[1] | 5-inch 854x480 touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Anycubic Slicer Next, the Anycubic app and USB (print only); AI spaghetti detection and object skip are supported[1] | Touchscreen plus mobile app and PC app; Bambu markets on-device AI error detection[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and USB drive (print only)[1] | Dual-band Wi-Fi (802.11 a/b/g/n, 2.4 and 5 GHz), built-in 8 GB eMMC and a USB port. Ethernet not available; no network kill switch and no 802.1X[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera is optional on the Kobra 3 - a 720p HD unit, not fitted as standard, unlike the Kobra S1, Kobra 4 and Kobra X[1][8][10] | Built-in camera, 1920x1080 at 30 fps - a real video-rate camera, unlike the 0.5 fps unit in the P1 series[2][7] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG and TPU, and Anycubic notes TPU is not compatible with the ACE Pro multi-material unit[1] | PLA, PETG, ABS, ASA, TPU, support materials, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[11] | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[12] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Bambu Lab P2S Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Anycubic Kobra 3 Combo Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab P2S store page us.store.bambulab.com · 2026-08 · vendor
- Anycubic store 3D printers collection (current line-up and headline prices, Aug 2026) store.anycubic.com · 2026-08 · vendor
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor