3D Printing InfoPrinter comparison
Anycubic Kobra 2 vs UltiMaker S8
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 comparisonsMore UltiMaker S8 comparisons
| Property | Anycubic Kobra 2BEDSLINGER | UltiMaker S8INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | UltiMaker |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2[1] | UltiMaker S8 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 15 May 2023 (Shopify publish date)[1] | Launched March 2025; the technical-specification and pricing announcement is dated 14 March 2025[3] |
| Street price (USD; dated snapshot per entry) | $169.00 on store.anycubic.com, Aug 2026, against a compare-at price of $279.00 - the cheapest machine in this file[1] | Starting at $8,999 at MatterHackers, in stock, checked Aug 2026. The launch announcement quoted approximately $9,000[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base model of a five-way family that is easy to confuse. All of Kobra 2, Kobra 2 Neo and Kobra 2 Pro share the same 220 x 220 x 250 mm build volume, but their speed ceilings differ: Neo 250 mm/s max / 150 typical, Kobra 2 300 / 200, Kobra 2 Pro 500 / 300. The Plus (320 x 320 x 400 mm) and Max (420 x 420 x 500 mm) are bigger but drop the bed ceiling to 90 C where the three small ones reach 110 C. Anycubic's own note: Kobra 2 firmware must be at V3.0.6 or above for the quoted speed[1][4][5][6][7] | Sold as printer-only or as a Pro Bundle. The bundle is not a trim level but a different machine footprint and weight: 495 x 500 x 1210.5 mm and 47.7 kg with the 6-spool Material Station, versus 495 x 585 x 800.5 mm and 30 kg for the printer alone. Print cores AA+ 0.40 x2 are included; BB, CC+ and DD 0.40 are separate purchases[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm in X x Y x Z; Anycubic quotes 12.1 L[1] | 330 x 240 x 300 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 486 x 440 x 435 mm stated as HWD, so the desk footprint is about 440 x 435 mm and the height is 486 mm[1] | 495 x 585 x 800.5 mm printer only; 495 x 500 x 1210.5 mm as the Pro Bundle[2][3] |
| Net weight (kg) | 8.4 kg[1] | 30 kg printer only; 47.7 kg as the Pro Bundle[2][3] |
| Frame construction & material | Not documented | Fully assembled, made in Europe[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed, with an Air Manager UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Build-volume temperature under 50 °C with open-loop control (manufacturer figure)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame; Anycubic describes double metal spindles with SG15 bearings on the moving axes[1] | Dual-extrusion print head with auto nozzle-lifting, flood detection and inductive probing. UltiMaker's Cheetah motion planner uses third-order continuous motion with corner blending[2][3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double-threaded rod Z axis (dual lead screws)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 300 mm/s maximum print speed (Anycubic Lab figure; firmware V3.0.6 or above required)[1] | Up to 500 mm/s in XY (manufacturer claim)[2][3] |
| Recommended/typical print speed | 200 mm/s recommended print speed (manufacturer figure) - the number to plan around, not the 300 mm/s headline[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 3000 mm/s2 acceleration (manufacturer figure) - modest next to the 20000 mm/s2 of the current Kobra generation[1][8] | Up to 50,000 mm/s2 (manufacturer claim)[2][3] |
| Jerk / square-corner-velocity setting (exact value) | Not documented | Jerk up to 100,000,000 mm/s3 (manufacturer claim)[2][3] |
| Max volumetric flow claimed (mm³/s) | Not documented | Up to 35 mm3/s extrusion flow (manufacturer claim)[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a dual-geared extrusion structure[1] | Dual gripper feeder with tension adjustment, release function and filament feed-rate control[2][3] |
| Filament diameter | Not documented | 2.85 mm[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Swappable print cores; AA+ 0.40 x2 included, BB 0.40 / CC+ 0.40 / DD 0.40 sold separately[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | Up to 340 °C (manufacturer claim)[2][3] |
| Heater cartridge power (W) | 60 W hotend heater (Anycubic states "upgraded extruder power reaches up to 60 watts")[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | Up to 120 °C on a flexible PEI plate (manufacturer claim)[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible PEI plate[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with smart Z-offset and a user-adjustable Z compensation value[1] | Inductive probing, integrated into the print head[2][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted, with power-loss recovery[1] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Dual spool holder with NFC recognition on the printer; the Pro Bundle substitutes a 6-spool Material Station with NFC and a dual-geared abrasion-resistant feeder[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan rated to 7000 rpm (Anycubic figure)[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Air Manager, which UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not published; print preparation is UltiMaker Cura 5.10 or newer, fleet management via UltiMaker Digital Factory[2][3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | microSD card[1] | Wi-Fi 2.4 and 5 GHz (802.11a/b/g/n/ac), Gigabit Ethernet, USB 2.0[2][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Full HD HDR camera[2][3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular assembly - Anycubic states 5 pieces in about 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU[1] | UltiMaker cites 301+ compatible materials including its own PLA, PETG, ABS, CPE, CPE+, PC, TPU and PET-CF, plus third-party grades[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 50 dBA operating sound, manufacturer figure. No independent measurement; distance and method not stated[2][3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[9] | 12 months, extendable to 5 years with an UltiMakerCare plan[2][3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy +/-0.15 mm +/-0.15% of feature nominal length (manufacturer specification, not an independent measurement)[2][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- UltiMaker S8 3D Printer listing matterhackers.com · 2026-08 · vendor
- New UltiMaker S8 high-speed 3D printer: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor