3D Printing InfoPrinter comparison
Anycubic Kobra 2 Pro vs QIDI Plus4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Pro comparisonsMore QIDI Plus4 comparisons
| Property | Anycubic Kobra 2 ProBEDSLINGER | QIDI Plus4COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Pro[1] | QIDI Plus4, sold as "Plus4 3D Printer". QIDI's own wiki files it under X-Plus4[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 2 February 2026 (Shopify publish date for this listing; the model itself is older)[1] | Announced September 2024; QIDI ran launch promotional pricing in the week of 20-27 September 2024 (secondary reporting, not a QIDI press release)[4] |
| Street price (USD; dated snapshot per entry) | $309.00 on store.anycubic.com, Aug 2026, with the compare-at price also $309.00[1] | $649.00 on us.qidi3d.com for the Plus4 + 1 filament variant against a $799.00 compare-at price; $699.00 on qidi3d.com against $799.00. Checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same 220 x 220 x 250 mm build volume as the Kobra 2 and Kobra 2 Neo, but Anycubic's own comparison table puts it at 500 mm/s max and 300 mm/s typical against the Kobra 2's 300/200 - the build volume alone will not tell these three apart. It also adds Anycubic APP support, which the base Kobra 2 lacks[1][5][6] | Two purchasable variants: Plus4 + Filament x1 at $649 and Plus4 Combo + Filament x1 at $799 (Combo adds the QIDI Box multi-material unit). Distinct from the older X-Plus 3 (280x280x270, 350 °C) and from the newer Plus5 (320x320x300)[3][2] |
| Market position: superseded? successor announced? | Not documented | Superseded at the top of the large-format line by the Plus5, launched 5 August 2026 with 18% more build volume; Plus4 still listed and in stock Aug 2026[7][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm; 12.1 L[1] | 305 x 305 x 280 mm advertised. No independently measured usable envelope found[2][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 486 x 435 x 463 mm stated HWD - footprint about 435 x 463 mm[1] | 505 x 487 x 550 mm[4] |
| Net weight (kg) | 8.4 kg[1] | 32 kg gross (3DJake). QIDI does not publish a net weight on the product page[4] |
| Frame construction & material | Not documented | Enclosed CoreXY chassis with double-layer chamber insulation; QIDI does not publish a frame material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed, double-layer insulated chamber with second-generation active heating to 65 °C[2][4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, actively heated by a 400 W heater which QIDI says reaches setpoint in about 8 minutes (manufacturer claim)[2][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger[1] | CoreXY[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual independent Z motors on 10 mm linear shafts and screws[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum print speed (Anycubic Lab figure)[1] | 600 mm/s (manufacturer claim, tool-head maximum)[4] |
| Recommended/typical print speed | 300 mm/s typical print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | <=20,000 mm/s2 (manufacturer claim)[4] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | One-click vibration compensation that detects X/Y resonance frequencies, plus flow control with retraction and refill compensation[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Optimised direct extruder[1] | Direct drive with hardened steel dual gears, 1.75 mm filament[2][4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Second-generation 80 W bimetal hotend with a multi-metal composite hardened-tip nozzle; 0.4 mm standard, 0.2/0.5/0.8 mm optional[2][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | <=370 °C claimed. No firmware max_temp verified for this model[2][4] |
| Heater cartridge power (W) | Not documented | 80 W hotend heater (manufacturer figure)[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | Conflicting manufacturer figures: QIDI's own Plus4 page states a 100 °C bed temperature, 3DJake's spec table states <=120 °C. Not resolved; the lower vendor-published figure is used as the sortable value[2][4] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | 6 mm aluminium-substrate heated bed with a double-sided textured PEI plate[2][4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with smart Z-offset[1] | Full-auto calibration; QIDI markets "hands-free automatic" levelling and does not name the probe technology on the product page[2][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor, plus a filament cutter and filament tangle detection (tangle mechanism not described)[4] |
| Multi-material/multi-color capability or official upgrade path | Not documented | QIDI Box multi-material unit supported; sold bundled as the Plus4 Combo[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Auxiliary part-cooling fan plus a chamber circulation fan; fan sizes and duct design not published[4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A7 1.2 GHz application processor[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[4] |
| Total rated power draw | Not documented | 450 W plus 400 W for chamber heating (rated)[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper v0.12, described by QIDI as open source. Fork details and current release not published on the product page[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch touchscreen, 800 x 480[2][4] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Supports the Anycubic app (firmware 3.0.5 or later) for online model search, real-time video supervision, online slicing and remote control[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi 2.4 GHz, Ethernet, USB[2][4] |
| Cloud service & phone app; LAN-only mode possible? | Not documented | Mobile and computer control, remote cloud or LAN-only operation[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in low-frame-rate camera, up to 1080p, timelapse supported[2][4] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | QIDI claims about 10 minutes from unbox to printing[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[4] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[5] | PLA, ABS, ASA, PETG, TPU, PA, PC, PA-CF/GF, PET-CF/GF, PPA-CF/GF, PPS-CF and other CF/GF-filled polymers[2][4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[9] | 1-year coverage, 14-day no-reason return, 30-day price protection[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- QIDI Plus4 product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Plus4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus4 technical data table 3djake.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor