3D Printing InfoPrinter comparison
Anycubic Kobra 2 Pro vs ELEGOO Centauri 2 Combo
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Pro comparisonsMore ELEGOO Centauri 2 Combo comparisons
| Property | Anycubic Kobra 2 ProBEDSLINGER | ELEGOO Centauri 2 ComboCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | ELEGOO |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Pro[1] | ELEGOO Centauri 2 Combo - the Centauri 2 sold with the CANVAS multicolour unit[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 2 February 2026 (Shopify publish date for this listing; the model itself is older)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $309.00 on store.anycubic.com, Aug 2026, with the compare-at price also $309.00[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same 220 x 220 x 250 mm build volume as the Kobra 2 and Kobra 2 Neo, but Anycubic's own comparison table puts it at 500 mm/s max and 300 mm/s typical against the Kobra 2's 300/200 - the build volume alone will not tell these three apart. It also adds Anycubic APP support, which the base Kobra 2 lacks[1][3][4] | Same printer as the bare Centauri 2 for every motion, hotend, bed and electronics figure; what the Combo adds is 4-colour CANVAS printing, RFID filament detection, auto refill and auto tangle detection, and what it costs is bench space - 500 x 480 x 586 mm and 15.5 kg against 398 x 404 x 490 mm and 13.7 kg. Camera, LED lighting and air filter remain optional expansions on both[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm; 12.1 L[1] | 256 x 256 x 256 mm; printing platform 260 x 260 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 486 x 435 x 463 mm stated HWD - footprint about 435 x 463 mm[1] | 500 x 480 x 586 mm with the CANVAS unit fitted[2] |
| Net weight (kg) | 8.4 kg[1] | 15.5 kg net, 19 kg gross[2] |
| Frame construction & material | Not documented | Rigid aluminium frame (Centauri 2 platform)[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger[1] | CoreXY with dual 4260 stepper motors[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three lead screws with three linear guide rods[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum print speed (Anycubic Lab figure)[1] | 500 mm/s or less, recommended 250 mm/s[2] |
| Recommended/typical print speed | 300 mm/s typical print speed (manufacturer figure)[1] | 250 mm/s recommended printing speed[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 20000 mm/s2 maximum acceleration; default 10000 mm/s2[2] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | One-click vibration compensation that detects X/Y resonance frequencies, plus flow control with retraction and refill compensation[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Optimised direct extruder[1] | Dual-gear direct extruder with one fan[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Brass-hardened steel nozzle, 0.4 mm, titanium-alloy heat break[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | 350 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 C max heated bed temperature at 25 C ambient[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with smart Z-offset[1] | 121-point auto-levelling plus partial bed levelling[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor, clog detection, auto tangle detection, RFID filament detection, auto refill, auto filament unloading and power-loss recovery[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | CANVAS four-colour printing with RFID filament identification and automatic refill - the defining difference from the bare Centauri 2[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | "Powerful Self-Developed Motherboard"[2] |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A7 1.2 GHz application processor[1] | Not documented |
| Total rated power draw | Not documented | 1100 W at 220 V, 350 W at 110 V rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | ELEGOO OS; ElegooSlicer recommended[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch colour capacitive touch screen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Supports the Anycubic app (firmware 3.0.5 or later) for online model search, real-time video supervision, online slicing and remote control[1] | Colour touch UI; STL, OBJ, 3MF and STEP input[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | USB and Wi-Fi[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[3] | Ideal: PLA, PETG, PLA-CF, TPU. Not recommended: ABS/ABS-CF, ASA/ASA-CF, PET/PET-CF, PETG-CF, PA/PA-CF, PC[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[5] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[6] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- ELEGOO Centauri 2 product page (Centauri 2 Combo vs Centauri 2 side-by-side specification table) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor