3D Printing InfoPrinter comparison
Anycubic Kobra 2 Plus vs FlashForge Creator 5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Plus comparisonsMore FlashForge Creator 5 comparisons
| Property | Anycubic Kobra 2 PlusBEDSLINGER | FlashForge Creator 5TOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | FlashForge |
| Class | BEDSLINGER | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Plus[1] | Flashforge Creator 5, sold as "Creator 5 4-Toolheads Multi-Color 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 31 August 2023 (Shopify publish date)[1] | Announced with a $10 deposit programme; shipping to deposit backers by 19 May 2026. One secondary source puts general release in early May 2026[4][5] |
| Launch MSRP (USD) | Not documented | $649 early-bird (deposit price, open until 20 June 2026); $799 standard MSRP[4][5] |
| Street price (USD; dated snapshot per entry) | $549.00 on store.anycubic.com, Aug 2026 (the compare-at price of $544.00 is lower than the sale price, which is a store data error rather than a discount)[1] | $799.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Large Kobra 2. Against the small Kobra 2 machines: 320 x 320 x 400 mm build, 13 kg, dual-motor dual Z, 49-point LeviQ 2.0, 8 GB on-board storage and Anycubic APP support - but the bed ceiling drops from 110 C to 90 C, which matters for ABS and ASA. Anycubic's own comparison on the same page is against the older Kobra Plus (350 x 200 x 200 mm, Bowden, 180 mm/s), not against the Kobra 2[1][6][7] | Paired with the Creator 5 Pro at $949, which adds a sealed enclosure, 65 °C active chamber heating and HEPA13 + carbon filtration. Motion system, 256 mm build volume, four toolheads, 600 mm/s and 30,000 mm/s2 are the same on both, so enclosure and chamber are the only reliable discriminators[2][8][4][5][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 400 x 320 x 320 mm stated HWD, i.e. 320 x 320 x 400 mm; Anycubic quotes 40.9 L[1] | 256 x 256 x 256 mm[4][5][9] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 630 x 605 x 564 mm stated HWD - footprint about 605 x 564 mm[1] | Not documented |
| Net weight (kg) | 13 kg[1] | Not documented |
| Frame construction & material | Not documented | CoreXY frame; FlashForge does not publish a frame-material breakdown and no dimensions or weight have been published for this model[4][5] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame. No enclosure, no chamber heating and no filtration[4][5][9] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with double metal spindles on X and Y and included belt tensioners[1] | CoreXY with four independent toolheads on a FlashSwap changer. FlashForge claims a physical head swap in about 7 seconds[4][5][9] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual-motor dual Z axis[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum print speed (Anycubic Lab figure)[1] | 600 mm/s maximum, reported by both secondary sources as a travel-speed figure (manufacturer claim)[4][5] |
| Recommended/typical print speed | 300 mm/s typical print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 30,000 mm/s2 maximum (manufacturer claim)[4][5] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | One-click vibration compensation on X/Y plus flow control[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct extruder with double gears[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel nozzles as standard[4][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 90 C hotbed temperature ceiling - lower than the 110 C of the small Kobra 2 machines[1][6] | 120 °C maximum (manufacturer claim)[4][5] |
| Bed surface (material, texture, coating), single/double-sided | PEI magnetic spring steel plate, 320 x 320 mm[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling, 49-point, with smart Z-offset[1] | Fully automatic calibration and levelling; FlashForge does not name the probe technology[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted as default[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Not documented | Four independent toolheads swapped physically rather than shared through one nozzle, which FlashForge markets as zero purge waste and up to 500% faster multi-colour printing[2][4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A7 1.2 GHz processor; 8 GB built-in storage[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[5] |
| Connectivity, UI & Camera | ||
| On-device UI capabilities (model preview, per-object controls, etc.) | Anycubic app support (firmware 3.0.5+) for remote monitoring, online slicing and control[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[4][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | 1080p camera at 30 fps. A camera module is also sold separately at $29.90, so verify whether a given SKU ships with it[4][5][3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[6] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[10] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 5 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor