3D Printing InfoPrinter comparison
Anycubic Kobra 2 Neo vs UltiMaker S8
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Neo comparisonsMore UltiMaker S8 comparisons
| Property | Anycubic Kobra 2 NeoBEDSLINGER | UltiMaker S8INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | UltiMaker |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Neo[1] | UltiMaker S8 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 31 August 2023 (Shopify publish date), the same day as the Kobra 2 Plus and Kobra 2 Max[1][4][5] | Launched March 2025; the technical-specification and pricing announcement is dated 14 March 2025[3] |
| Street price (USD; dated snapshot per entry) | $249.00 on store.anycubic.com, Aug 2026 - higher than the better-specified Kobra 2 at $169 on the same day, which is a listing quirk rather than a positioning statement[1][6] | Starting at $8,999 at MatterHackers, in stock, checked Aug 2026. The launch announcement quoted approximately $9,000[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Lowest model of the Kobra 2 family. Same 220 x 220 x 250 mm build volume as the Kobra 2 and Kobra 2 Pro but the slowest of the three (250 mm/s max, 150 mm/s typical against 300/200 and 500/300), and the only one with a 2.4-inch knob-driven screen instead of a 4.3-inch touchscreen[1][6][7] | Sold as printer-only or as a Pro Bundle. The bundle is not a trim level but a different machine footprint and weight: 495 x 500 x 1210.5 mm and 47.7 kg with the 6-spool Material Station, versus 495 x 585 x 800.5 mm and 30 kg for the printer alone. Print cores AA+ 0.40 x2 are included; BB, CC+ and DD 0.40 are separate purchases[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm; 12.1 L[1] | 330 x 240 x 300 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 485 x 440 x 440 mm stated HWD - footprint about 440 x 440 mm[1] | 495 x 585 x 800.5 mm printer only; 495 x 500 x 1210.5 mm as the Pro Bundle[2][3] |
| Net weight (kg) | 7.3 kg[1] | 30 kg printer only; 47.7 kg as the Pro Bundle[2][3] |
| Frame construction & material | Not documented | Fully assembled, made in Europe[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed, with an Air Manager UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Build-volume temperature under 50 °C with open-loop control (manufacturer figure)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame structure built from 5 modules[1] | Dual-extrusion print head with auto nozzle-lifting, flood detection and inductive probing. UltiMaker's Cheetah motion planner uses third-order continuous motion with corner blending[2][3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s maximum print speed (Anycubic Lab figure)[1] | Up to 500 mm/s in XY (manufacturer claim)[2][3] |
| Recommended/typical print speed | 150 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | Up to 50,000 mm/s2 (manufacturer claim)[2][3] |
| Jerk / square-corner-velocity setting (exact value) | Not documented | Jerk up to 100,000,000 mm/s3 (manufacturer claim)[2][3] |
| Max volumetric flow claimed (mm³/s) | Not documented | Up to 35 mm3/s extrusion flow (manufacturer claim)[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Integrated direct extruder[1] | Dual gripper feeder with tension adjustment, release function and filament feed-rate control[2][3] |
| Filament diameter | Not documented | 2.85 mm[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Swappable print cores; AA+ 0.40 x2 included, BB 0.40 / CC+ 0.40 / DD 0.40 sold separately[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | Up to 340 °C (manufacturer claim)[2][3] |
| Heater cartridge power (W) | 60 W hot end (manufacturer figure)[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | Up to 120 °C on a flexible PEI plate (manufacturer claim)[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible PEI plate[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with intelligent Z-offset compensation[1] | Inductive probing, integrated into the print head[2][3] |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Not documented | Dual spool holder with NFC recognition on the printer; the Pro Bundle substitutes a 6-spool Material Station with NFC and a dual-geared abrasion-resistant feeder[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | 7000 rpm cooling fan (manufacturer figure)[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Air Manager, which UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin - Anycubic states it applies "linear propulsion and input shaping functions in Marlin firmware", which makes this one of the few Anycubic machines with a named firmware base rather than the later Kobra OS branding[1][8] | Not published; print preparation is UltiMaker Cura 5.10 or newer, fleet management via UltiMaker Digital Factory[2][3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.4-inch LCD knob screen - not a touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Knob-driven UI, redesigned by Anycubic for the Kobra 2 generation[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi 2.4 and 5 GHz (802.11a/b/g/n/ac), Gigabit Ethernet, USB 2.0[2][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Full HD HDR camera[2][3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Five modules with a gantry frame design, described by Anycubic as easy assembly and low maintenance[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[6] | UltiMaker cites 301+ compatible materials including its own PLA, PETG, ABS, CPE, CPE+, PC, TPU and PET-CF, plus third-party grades[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 50 dBA operating sound, manufacturer figure. No independent measurement; distance and method not stated[2][3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[9] | 12 months, extendable to 5 years with an UltiMakerCare plan[2][3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy +/-0.15 mm +/-0.15% of feature nominal length (manufacturer specification, not an independent measurement)[2][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- UltiMaker S8 3D Printer listing matterhackers.com · 2026-08 · vendor
- New UltiMaker S8 high-speed 3D printer: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor