3D Printing InfoPrinter comparison
Anycubic Kobra 2 Neo vs Bambu Lab P1P
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Neo comparisonsMore Bambu Lab P1P comparisons
| Property | Anycubic Kobra 2 NeoBEDSLINGER | Bambu Lab P1PCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Bambu Lab |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Neo[1] | Bambu Lab P1P. Bambu documents it alongside the P1S in a single two-column parameters table[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 31 August 2023 (Shopify publish date), the same day as the Kobra 2 Plus and Kobra 2 Max[1][3][4] | Not documented |
| Street price (USD; dated snapshot per entry) | $249.00 on store.anycubic.com, Aug 2026 - higher than the better-specified Kobra 2 at $169 on the same day, which is a listing quirk rather than a positioning statement[1][5] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Lowest model of the Kobra 2 family. Same 220 x 220 x 250 mm build volume as the Kobra 2 and Kobra 2 Pro but the slowest of the three (250 mm/s max, 150 mm/s typical against 300/200 and 500/300), and the only one with a 2.4-inch knob-driven screen instead of a 4.3-inch touchscreen[1][5][6] | P1P is the open-frame version; the P1S is the same motion platform in an enclosure with plastic and glass panels. Bambu's own comparison table shows what the P1P lacks: control-board fan, chamber temperature regulator fan, auxiliary part-cooling fan and air filter are all listed "Optional" on the P1P and "Closed Loop Control"/"Activated Carbon Filter" on the P1S. The P1P is also lighter, 9.65 kg vs 12.95 kg, and 386 mm deep vs 389 mm. A P1P Enclosure Kit is sold as a spare part. Filament support differs accordingly: ABS/ASA are "Capable" on the P1P but "Ideal" on the P1S[2] |
| Market position: superseded? successor announced? | Not documented | Superseded. No longer listed in the Bambu Lab US store 3D-printer collection in Aug 2026 (the collection carries A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D, H2C); /products/p1p redirects to the collection page and only P1P spare parts remain in the store sitemap. No live first-party price could therefore be recorded[7][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm; 12.1 L[1] | 256 x 256 x 256 mm advertised. Bambu's own footnote limits the default printable height in Bambu Studio to 250 mm to avoid heatbed collisions, and warns that the collapsible filament-cutter stopper takes part of the printing area when popped out[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 485 x 440 x 440 mm stated HWD - footprint about 440 x 440 mm[1] | 386 x 389 x 458 mm (P1P). Bambu prints P1P and P1S dimensions in the same cell - the P1S is 389 x 389 x 458 mm[2] |
| Net weight (kg) | 7.3 kg[1] | 9.65 kg net, 14.30 kg gross[2] |
| Frame construction & material | Not documented | Open frame; Bambu offers printable mod-plates for the side panels[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame. An official P1P Enclosure Kit exists as a spare part, and the enclosed version of the same platform is sold as the P1S[2][7] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame structure built from 5 modules[1] | CoreXY driven by two stepper motors, each with its own belt to the printhead. Bambu's wiki states the P1P and P1S share the same motion system[8] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three leadscrews driven from a single stepper motor through a belt; the whole bed drops in Z. There is no motorised Z-tilt - bed tramming is by three manual knobs under the bed[8] |
| Belts (type, width, e.g. Gates?) | Not documented | Adjustable belt tensioners at the rear; a Belt Tension Monitor reports when tension drifts out of range[8] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s maximum print speed (Anycubic Lab figure)[1] | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Recommended/typical print speed | 150 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Integrated direct extruder[1] | Direct drive; Bambu sells a "Stainless Steel Extruder Unit (P1 series)" as the service part[8] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal all-in-one hotend: the nozzle is integrated into the heatblock and joined to the heatsink by a thin metal tube, so the hotend is replaced as a unit. 0.4 mm stainless-steel nozzle included; 0.2/0.6/0.8 mm optional[2][8] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | 300 C claimed max hot-end temperature[2] |
| Heater cartridge power (W) | 60 W hot end (manufacturer figure)[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | 100 C max build-plate temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with intelligent Z-offset compensation[1] | Nozzle-touch probing against three ceramic force (piezo) sensors under the heatbed: Z homing works by detecting the force of the nozzle contacting the heatbed. Three manual levelling knobs are also fitted[9][8] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Yes - filament run-out sensor[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Compatible with AMS and the AMS hub, up to 16 colours with four AMS units[8] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | 7000 rpm cooling fan (manufacturer figure)[1] | Part-cooling fan fitted; the control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan that the P1S has under closed-loop control are all listed as Optional on the P1P[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin - Anycubic states it applies "linear propulsion and input shaping functions in Marlin firmware", which makes this one of the few Anycubic machines with a named firmware base rather than the later Kobra OS branding[1][10] | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[11] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.4-inch LCD knob screen - not a touchscreen[1] | 2.7-inch 192x64 monochrome screen, not a touchscreen - control is by button, app or PC application[8] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Knob-driven UI, redesigned by Anycubic for the Kobra 2 generation[1] | Button-driven on-device UI on a 192x64 monochrome panel; most interaction is expected to happen in Bambu Studio or Bambu Handy[8] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi, Bluetooth and Bambu-Bus; microSD card storage; 5 V/1.5 A USB output power[8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported - the 0.5 fps figure is Bambu's own and is far below video rate[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Five modules with a gantry frame design, described by Anycubic as easy assembly and low maintenance[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[5] | Ideal: PLA, PETG, TPU, PVA, PET. Capable: PA, PC, ABS, ASA - the open frame is the limiting factor, and the same table upgrades ABS/ASA to Ideal for the enclosed P1S[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[12] | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[13] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor