3D Printing InfoPrinter comparison
Anycubic Kobra 2 Max vs Stratasys F120
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Max comparisonsMore Stratasys F120 comparisons
| Property | Anycubic Kobra 2 MaxBEDSLINGER | Stratasys F120INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Stratasys |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Max[1] | Stratasys F120, part of the Stratasys F123 Series[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 31 August 2023 (Shopify publish date)[1] | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[2] |
| Street price (USD; dated snapshot per entry) | $639.00 on store.anycubic.com, Aug 2026[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Largest Kobra 2. Shares the Plus's 90 C bed ceiling and 500/300 mm/s figures but scales to 420 x 420 x 500 mm and 21 kg. Anycubic's on-page comparison is against the older Kobra Max (450 x 400 x 400 mm, Bowden, 180 mm/s), not against the Kobra 2 Plus. Note the newer Kobra 3 Max has the same 420 x 420 x 500 mm volume - build volume alone will not distinguish them[1][3][4] | The F120 is the odd one out in the series: smaller cabinet (889 x 870 x 721 mm, 124 kg vs 1,626 x 864 x 711 mm, 227 kg), two external material coil boxes rather than internal spool bays, only two model materials, and no 0.127 mm layer option. Same build size as the F170 but not the same machine[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 500 x 420 x 420 mm stated HWD, i.e. 420 x 420 x 500 mm; Anycubic quotes 88.2 L[1] | 254 x 254 x 254 mm (10 x 10 x 10 in)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 740 x 735 x 640 mm stated HWD - footprint about 735 x 640 mm; this is a floor- or bench-dominating machine[1] | 889 x 870 x 721 mm (35 x 35 x 29 in)[2] |
| Net weight (kg) | 21 kg[1] | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[2] |
| Frame construction & material | Not documented | Fully enclosed office/classroom-grade cabinet, factory assembled[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed build chamber[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with double metal spindles on X and Y and included belt tensioners[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual-motor dual Z axis[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum print speed (Anycubic Lab figure)[1] | Not documented |
| Recommended/typical print speed | 300 mm/s typical print speed (manufacturer figure)[1] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | One-click vibration compensation on X/Y plus flow control[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct extruder with double gears[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 90 C hotbed temperature ceiling[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | PEI magnetic spring steel plate, 420 x 420 mm[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling, 49-point, with smart Z-offset[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted as default[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A7 1.2 GHz processor; 8 GB built-in storage[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[2] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[5] | ABS-M30 and ASA, with SR-30 support material. Notably the F120 does NOT get PLA, FDM TPU 92A or ABS-CF10, and cannot use the 0.127 mm layer height[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[6] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor