3D Printing InfoPrinter comparison
Anycubic Kobra 2 Max vs Creality K2 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Max comparisonsMore Creality K2 Plus comparisons
| Property | Anycubic Kobra 2 MaxBEDSLINGER | Creality K2 PlusCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Creality |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Max[1] | Creality K2 Plus[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 31 August 2023 (Shopify publish date)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $639.00 on store.anycubic.com, Aug 2026[1] | $999.00 on store.creality.com, Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Largest Kobra 2. Shares the Plus's 90 C bed ceiling and 500/300 mm/s figures but scales to 420 x 420 x 500 mm and 21 kg. Anycubic's on-page comparison is against the older Kobra Max (450 x 400 x 400 mm, Bowden, 180 mm/s), not against the Kobra 2 Plus. Note the newer Kobra 3 Max has the same 420 x 420 x 500 mm volume - build volume alone will not distinguish them[1][4][5] | Largest and only fully specified K2. It is the only one with a 350 C nozzle, a 120 C bed, 30000 mm/s2 acceleration, step-servo motors on Z as well as X/Y, automatically adjusted belt tension, two auxiliary cooling fans, two air filters, a 1080p chamber camera, dual-band Wi-Fi and a 4.3-inch screen. Its "smart auto levelling" is listed as arriving via firmware update rather than shipping enabled, unlike the K2 and K2 Pro. A separate K2 SE model also exists[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 500 x 420 x 420 mm stated HWD, i.e. 420 x 420 x 500 mm; Anycubic quotes 88.2 L[1] | 350 x 350 x 350 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 740 x 735 x 640 mm stated HWD - footprint about 735 x 640 mm; this is a floor- or bench-dominating machine[1] | 495 x 515 x 640 mm[2] |
| Net weight (kg) | 21 kg[1] | 35 kg[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed with chamber temperature control up to 60 C and two air filters[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 60 C max chamber temperature (manufacturer figure)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with double metal spindles on X and Y and included belt tensioners[1] | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual-motor dual Z axis[1] | Not documented |
| Belts (type, width, e.g. Gates?) | Not documented | Automatically adjusted belt tension - the K2 and K2 Pro are tensioned by hand[2] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | Step-servo motors on the X, Y and Z axes and the extruder[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum print speed (Anycubic Lab figure)[1] | 600 mm/s max printing speed (manufacturer claim)[2] |
| Recommended/typical print speed | 300 mm/s typical print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 30000 mm/s2 max acceleration (manufacturer claim) - 50% above the rest of the K2 family[2] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | One-click vibration compensation on X/Y plus flow control[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct extruder with double gears[1] | Direct drive with a 0.4 mm hardened "unicorn" quick-swap nozzle[6] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | 350 C claimed max nozzle temperature[2] |
| Heater cartridge power (W) | Not documented | 100 W rated hotend power[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 90 C hotbed temperature ceiling[1] | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI magnetic spring steel plate, 420 x 420 mm[1] | Coated steel flex plate, heated, removable[6] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling, 49-point, with smart Z-offset[1] | Smart auto levelling listed as "Available via Firmware Update" rather than shipping enabled; automatic flow-rate calibration via the nozzle AI camera[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted as default[1] | Filament run-out sensor fitted[6] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Two auxiliary cooling fans and two air filters[2] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A7 1.2 GHz processor; 8 GB built-in storage[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[7][8][2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Touch UI with a built-in RFID reader; Creality notes the K2 Plus has no alarm sounds, which the K2 and K2 Pro do have[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Dual-band Wi-Fi (2.4 and 5 GHz), RJ45 Ethernet, USB drive and a Creality 485 port; 32 GB eMMC[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | One chamber camera at 1080p 30 fps plus the nozzle AI camera[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[9] | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[7][8] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[10] | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[11] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Not documented | Benchy in 15 minutes 56 seconds - independently measured by Tom's Hardware, which noted visible layer lines and slightly droopy overhangs at that speed[6] |
| Review scores from major outlets (list outlet + score + date) | Not documented | Tom's Hardware rating 4.5 out of 5 in the page's structured data[6] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- Creality US store - K2 Plus 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Tom's Hardware - Creality K2 Plus Review (spec box and measured Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor