3D Printing InfoPrinter comparison
AnkerMake M5 vs Voron 0.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
| Property | AnkerMake M5BEDSLINGER | Voron 0.2COREXY |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | Voron Design |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | Voron 0.2, current revision R1. Sold under kit vendors' names: "Voron V0.2-S1 (R1) 3D Printer Kit by LDO & HoneyBadger", "Voron 0.2 R1 Latest Version CoreXY 3D Printer Kit" (Formbot)[3][4] |
| Street price (USD; dated snapshot per entry) | Not documented | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][5][2] | Two things get conflated. First, revision: R1 is the current one, adding a filament-runout sensor, MR85 bearings and fastener changes. Second, kit vendor: the LDO/HoneyBadger S1 kit ships an SKR Pico, E3D Revo, HoneyBadger dual-sided PEI/CF bed and 200 W supply, while the Formbot kit ships a TZ V6 or Dragon hotend and a 150 W supply, so hotend and PSU specs are vendor-specific, not model-specific. Printed parts are an extra on both[3][4] |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 120 x 120 x 120 mm[3][4] |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame with acrylic panels (LDO kit); the LDO/HoneyBadger build uses a 100 mm top hat. X axis on a genuine HIWIN rail, Y and Z on HoneyBadger stainless rails[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Enclosed by acrylic panels in the LDO kit[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | CoreXY with the build plate moving in Z[3][4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Genuine HIWIN linear rail on X in the LDO kit[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification[4] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Direct drive in a Mini Stealthburner toolhead with a picobilical board and umbilical cable (LDO kit)[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Kit-dependent: E3D Revo (Voron edition) in the LDO kit; TZ V6, Dragon standard-flow or Dragon high-flow in the Formbot kit[3][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing[4] |
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C (Formbot kit listing)[4] |
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | HoneyBadger dual-sided P-series plate in the LDO kit: smooth black PEI on one face, carbon fibre on the other, on a Kirigami mount with an edge-to-edge polyimide film heater[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | Not documented |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Kit-dependent. LDO kit: SKR Pico (LDO Edition) with a Raspberry Pi 4B as host[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 200 W (LDO kit) or 150 W (Formbot kit)[3][4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Self-assembly kit. Printed parts are not included in the LDO kit (sourced separately, e.g. through Voron's Print It Forward); the Formbot kit offers them as an option[3][4] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger fabreeko.com · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) formbot3d.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor