3D Printing InfoPrinter comparison
AnkerMake M5 vs Roboze ARGO 350
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5 comparisonsMore Roboze ARGO 350 comparisons
| Property | AnkerMake M5BEDSLINGER | Roboze ARGO 350INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | Roboze |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | Roboze ARGO 350 3D Printer[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][4][2] | Single-extruder machine; the ARGO 500 is dual-extruder with a 500 mm cube, an 11-inch screen and 1700 kg. Both quote a 450 °C nozzle and a 180 °C chamber, so temperature figures will not tell them apart — extruder count, build size and weight will. Pricing note: Not published. Top 3D Shop lists the machine as available on backorder with a 3-5 week lead time but requires a quote request rather than showing a price, checked Aug 2026[3][5] |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 350 x 300 x 300 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 1130 x 1150 x 2000 mm[3] |
| Net weight (kg) | Not documented | 1200 kg[3] |
| Frame construction & material | Not documented | Fully assembled, made in Italy[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Enclosed[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 180 °C chamber temperature (manufacturer specification, actively heated)[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | CoreXY[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Single extruder, 1.75 mm filament[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 450 °C maximum nozzle temperature (manufacturer specification)[3] |
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm[3] |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | Removable polymer build sheets held by vacuum[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | Not documented |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Proprietary; the recommended software is Roboze Prometheus[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | 7-inch colour touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | USB, Ethernet, Wi-Fi[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | PEEK, Carbon PEEK, Carbon PA, ULTEM AM9085F, PC, Functional-nylon, ABS-ESD, PP, Flex-TPU, Strong-ABS, Ultra-PLA and others[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | XY accuracy 0.01 mm, Z accuracy 0.025 mm (manufacturer specification, not an independent measurement)[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- Roboze ARGO 350 product listing top3dshop.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor
- Roboze ARGO 500 product listing top3dshop.com · 2026-08 · vendor