3D Printing InfoPrinter comparison
AnkerMake M5 vs Anycubic Kobra X
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5 comparisonsMore Anycubic Kobra X comparisons
| Property | AnkerMake M5BEDSLINGER | Anycubic Kobra XBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | Anycubic |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | Anycubic Kobra X (store variant title "Kobra X (4 Colors)")[3] |
| Release date (announcement and actual shipping) | Not documented | Listed on the Anycubic store from 25 December 2025 (Shopify publish date)[4] |
| Street price (USD; dated snapshot per entry) | Not documented | $299.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $399.00 ($344.00 for the EU plug variant). The collection page headline reads "Kobra X - Price from $289"[4][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][6][2] | Same 260 mm cube and the same machine dimensions as the Kobra 4 (455.4 x 445.3 x 461.3 mm) - the difference is that the Kobra X has native 4-colour printing built in, expandable to 19 colours, where the Kobra 4 needs an ACE 2 Pro for any multicolour at all. The Kobra X also takes a wider filament list (adds PVA, PLA-CF, PETG-CF, ASA) but still needs an ACE 2 Pro for active drying[3][7] |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 260 x 260 x 260 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 455.4 x 445.3 x 461.3 mm for the printer; the ACE 2 Pro, if added, is a separate 368 x 291.5 x 236.5 mm unit[3] |
| Net weight (kg) | Not documented | About 9.5 kg for the printer (Anycubic's own figure is approximate); packaged 13.2 kg bare or 18 kg as the Combo[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | Anycubic does not state a construction type for the Kobra X, but its dimensions, price and feature set match the gantry/bed-slinger Kobra 4 rather than the CoreXY S1 series[3][7] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[3] |
| Recommended/typical print speed | Not documented | 300 mm/s recommended print speed (manufacturer figure)[3] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[3] |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Direct drive ("short distance extrusion")[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Hardened-steel nozzle, 0.4 mm standard, expandable to 0.25, 0.6 and 0.8 mm[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 C maximum nozzle temperature[3] |
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 C maximum hotbed temperature on a PEI spring steel build plate[3] |
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | LeviQ 3.0 auto-levelling with Z-offset and area levelling[3] |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection with auto resume, entanglement detection and power-loss resume[3] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Native 4-colour printing built in, expandable to 19 colours; active drying still needs a separate ACE 2 Pro[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Kobra OS with pressure advance and flow calibration supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Control from the printer, the slicing software, the Anycubic app and USB (print only); AI spaghetti detection and object skip supported[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | Printer UI, slicing software, Anycubic app and USB drive (print only)[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | Standard HD camera fitted, 720p[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, PETG, TPU, PVA, PLA-CF, PETG-CF, ASA[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 48 dB or less - a manufacturer figure with no mode, distance or method stated[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[8] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- Anycubic Kobra X product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra X Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic store 3D printers collection (current line-up and headline prices, Aug 2026) store.anycubic.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor