Printer comparison

3DGence INDUSTRY F350 vs INTAMSYS FUNMAT PRO 610 HT

Compare hardware, build volume, printing specifications, dated prices and sources.

3DGence INDUSTRY F350 guide INTAMSYS FUNMAT PRO 610 HT guide

First printerSecond printer

2 selected · all documented properties

Open these two in the interactive comparison More 3DGence INDUSTRY F350 comparisons More INTAMSYS FUNMAT PRO 610 HT comparisons

3DGence INDUSTRY F350 vs INTAMSYS FUNMAT PRO 610 HT — documented properties and sources
Property	3DGence INDUSTRY F350INDUSTRIAL	INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL
Identity
Brand	3DGence	INTAMSYS
Class	INDUSTRIAL	INDUSTRIAL
Identity & Market
Manufacturer & exact marketed model name (verify the exact product identity first)	3DGence INDUSTRY F350[1]	INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[2]
Release date (announcement and actual shipping)	2021[1]	Not documented
Launch MSRP (USD)	From $30,000 (Aniwaa quotes the same figure in EUR)[1]	Not documented
Street price (USD; dated snapshot per entry)	Not documented	$139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[2]
Variants & sibling models — and how to tell them apart (spec-contamination risk)	Part of 3DGence's INDUSTRY line; Aniwaa's page covers only the F350. No live retail listing with a USD price was found, so the $30,000 figure is a starting price, not a street price[1]	The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[2][3]
Physical & Frame
Build volume X×Y×Z (mm) — advertised vs actually usable	40.46 L (340 x 340 x 350 mm)[1]	610 x 508 x 508 mm (24 x 20 x 20 in)[2]
Machine footprint (mm) & clearance needed (cable/spool overhang)	1825 x 960 x 940 mm[1]	1710 x 1425 x 2350 mm including the warning lights[2]
Net weight (kg)	335 kg[1]	1450 kg[2]
Frame construction & material	Not documented	Servo control system on high-precision ball screws; liquid cooling plus fans[2]
Enclosure: open / enclosed; panel material; door/lid	Enclosed with a heated chamber[1]	Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[2]
Passive chamber temperature reached (if enclosed; measured values preferred)	140 °C maximum chamber temperature (manufacturer specification, actively heated)[1]	Up to 300 °C chamber temperature (manufacturer specification, actively heated)[2]
Kinematics & Motion Hardware
Kinematics (bedslinger i3 / CoreXY / other)	Two extruders; kinematic layout not stated on the source checked[1]	Servo-driven ball-screw motion system; two nozzles[2]
Speed & Acceleration
Max print speed (claimed, mm/s)	Not documented	160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[2]
Extruder
Type (direct drive / bowden) & design name	Two extruders[1]	Two nozzles, 1.75 mm filament[2]
Hotend & Nozzle
Max nozzle temp claimed AND firmware max temp limit (both values)	500 °C maximum nozzle temperature (manufacturer specification)[1]	500 °C maximum nozzle temperature (manufacturer specification)[2]
Stock nozzle size & sizes included in box	Not documented	0.4 mm default; 0.6 and 0.8 mm optional[2]
Heated Bed & Surface
Max bed temp claimed AND firmware limit	160 °C maximum bed temperature[1]	Up to 300 °C heated build plate[2]
Bed surface (material, texture, coating), single/double-sided	Not documented	Flexible build plates with a vacuum adsorption system[2]
Leveling & Z-Offset
Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe)	Not documented	Auto levelling; probe technology not named[2]
Filament Handling & Detection
Spool holder location & max spool size; drybox compatibility	Not documented	Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[2]
Electronics & Power
Input voltage (110/220 V, switch or auto)	Not documented	Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[2]
Total rated power draw	Not documented	15 kW maximum[2]
Firmware & Openness
Firmware base & current version (Klipper fork / Marlin fork / proprietary)	Not documented	Proprietary; slicing is INTAMSUITE (Windows only)[2]
Connectivity, UI & Camera
Display: size, type, touch?	Not documented	10-inch touchscreen[2]
WiFi (band/standard), Ethernet, USB ports, SD/flash-drive	Not documented	Wi-Fi, Ethernet, USB[2]
Materials Support
Officially supported filament list	PLA, ABS, ASA, PET, PA6, PA-CF, PEEK and various composites[1]	PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[2]
Safety
Certifications (UL/ETL/CE/FCC — verify, don't assume)	Not documented	CE, FCC, SGS; safety design to EN60204[2]
Hardware safety: fusing, strain reliefs, belt covers, pinch points	Not documented	Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[2]
Independently Measured Performance
Dimensional accuracy measurements (third-party, with numbers)	Not documented	Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[2]

Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.

Sources for this comparison

3DGence INDUSTRY F350 specification page aniwaa.com · 2026-08 · doc
Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor