3D Printing InfoPrinter comparison
3DGence INDUSTRY F350 vs Formlabs Form 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore 3DGence INDUSTRY F350 comparisonsMore Formlabs Form 4 comparisons
| Property | 3DGence INDUSTRY F350INDUSTRIAL | Formlabs Form 4RESIN |
|---|---|---|
| Identity | ||
| Brand | 3DGence | Formlabs |
| Class | INDUSTRIAL | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | 3DGence INDUSTRY F350[1] | Formlabs Form 4 3D Printer[2][3] |
| Release date (announcement and actual shipping) | 2021[1] | Not documented |
| Launch MSRP (USD) | From $30,000 (Aniwaa quotes the same figure in EUR)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | Not documented | Starting at $2,625.00 at GoEngineer, in stock, checked Aug 2026. Formlabs sells the printer as part of packages (Form 4 Complete Package etc.), so package prices are much higher than the printer-only figure[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Part of 3DGence's INDUSTRY line; Aniwaa's page covers only the F350. No live retail listing with a USD price was found, so the $30,000 figure is a starting price, not a street price[1] | Three machines share this platform and are constantly conflated. Form 4: 200 x 125 x 210 mm, 50 um pixels, 18.3 kg, 480 W, one resin cartridge, NOT biocompatible. Form 4B: identical hardware but validated for 38 Formlabs materials including 15 biocompatible. Form 4L: 353 x 196 x 350 mm, 46 um pixels, 58.5 kg, 900 W, two cartridges[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 40.46 L (340 x 340 x 350 mm)[1] | 200 x 125 x 210 mm (Formlabs quotes 5.25 litres)[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1825 x 960 x 940 mm[1] | 398 x 367 x 554 mm[2][3] |
| Net weight (kg) | 335 kg[1] | 18.3 kg[2][3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a heated chamber[1] | Enclosed cabinet with a hinged UV-blocking cover. Operating temperature 18-28 C[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 140 °C maximum chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Two extruders; kinematic layout not stated on the source checked[1] | Masked stereolithography (MSLA). Formlabs brands the engine Low Force Display; straight-lift peel[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two extruders[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C maximum bed temperature[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 4.8 A, 50/60 Hz, 480 W[2] |
| Total rated power draw | Not documented | 480 W[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Proprietary. Print preparation is PreForm; fleet management is Formlabs Dashboard[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 7-inch interactive touchscreen, 1280 x 800 (control panel — not the masking LCD, see W1)[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Dual-band Wi-Fi, Gigabit Ethernet (1000 Mbit), USB-C 2.0[2][3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PET, PA6, PA-CF, PEEK and various composites[1] | Formlabs resins across rigid, tough, general purpose, flame retardant, silicone, elastic, ceramic and castable families. Biocompatible resins require the Form 4B, not the Form 4[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XY dimensional tolerance +/-0.15% — a manufacturer specification, not an independent measurement[2][3] |
| Resin & MSLA | ||
| Masking LCD | Not documented | Low Force Display masking LCD with a 50 um pixel size and pre-tuned anti-aliasing. Formlabs does not publish the screen diagonal or pixel count[2][3] |
| Light source | Not documented | Backlight unit with 60 uniform-wavelength high-power LEDs behind collimating lenses, with integrated cooling[2][3] |
| Vertical print speedmm/h | Not documented | Maximum 100 mm/h; average 40 mm/h at a 100 um layer height (manufacturer figures — GoEngineer publishes both, which is unusually explicit about the basis). Formlabs separately claims most prints finish in under 2 hours[3][2] |
| Layer height range | Not documented | 25-200 um per Formlabs' own tech-spec page; GoEngineer's listing for the same machine says 25-300 um. Unresolved[2][3] |
| Resin vat & feeding | Not documented | Single next-generation resin cartridge; Formlabs claims 5-10x faster filling and 63% less waste. Resin tank rated for 75,000+ layers with any Formlabs material. No vat capacity published[2][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- 3DGence INDUSTRY F350 specification page aniwaa.com · 2026-08 · doc
- Formlabs resin printer technical specifications (Form 4 / 4B / 4L) formlabs.com · 2026-08 · vendor
- Formlabs Form 4 3D printer listing store.goengineer.com · 2026-08 · vendor