3D Printing InfoPrinter comparison
3DGence INDUSTRY F350 vs Creality Ender-3 V3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore 3DGence INDUSTRY F350 comparisonsMore Creality Ender-3 V3 comparisons
| Property | 3DGence INDUSTRY F350INDUSTRIAL | Creality Ender-3 V3BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | 3DGence | Creality |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | 3DGence INDUSTRY F350[1] | Creality Ender-3 V3, marketed as a CoreXZ machine[2] |
| Release date (announcement and actual shipping) | 2021[1] | Not documented |
| Launch MSRP (USD) | From $30,000 (Aniwaa quotes the same figure in EUR)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | Not documented | $239.00 on store.creality.com, Aug 2026 (listed as "Ender-3 V3 CoreXZ 3D Printer")[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Part of 3DGence's INDUSTRY line; Aniwaa's page covers only the F350. No live retail listing with a USD price was found, so the $30,000 figure is a starting price, not a street price[1] | Do not confuse with the Ender-3 V3 SE or KE, which are cheaper and slower and use a conventional bed-slinger gantry - only the V3 and V3 Plus use CoreXZ. The V3 Plus is the same idea scaled to 300 x 300 x 330 mm. Creality's own spec table gives the V3 a 110 C bed, where the SE, KE, V4 and K1 series stop at 100 C[2][4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 40.46 L (340 x 340 x 350 mm)[1] | 220 x 220 x 250 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1825 x 960 x 940 mm[1] | 358 x 374 x 498 mm[2] |
| Net weight (kg) | 335 kg[1] | 7.83 kg net (Creality); Tom's Hardware rounds it to 7.8 kg[2][6] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a heated chamber[1] | Open frame, no enclosure[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 140 °C maximum chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Two extruders; kinematic layout not stated on the source checked[1] | CoreXZ kinematics - the X and Z axes are coupled and driven together, with the bed still moving in Y[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 600 mm/s max printing speed (manufacturer claim; Creality Lab states the typical speed is 300 mm/s)[2][4] |
| Recommended/typical print speed | Not documented | 300 mm/s typical printing speed (Creality Lab figure quoted on the sibling V3 Plus page for the same CoreXZ platform)[4] |
| Max acceleration (claimed, mm/s²) | Not documented | 20000 mm/s2 max acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two extruders[1] | New high-speed direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Quick-swap nozzle with a hardened steel tip integrated with the heatbreak (Creality's "unicorn" nozzle), replaced as a unit[2][6] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C maximum bed temperature[1] | 110 C max heatbed temperature - higher than the rest of the Ender-3 V3 family[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | PEI flexible build plate, removable spring steel[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Auto levelling with automatic Z offset (Creality states auto levelling; Tom's Hardware records "Automatic + Z")[2][6] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor fitted[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit mainboard (Creality does not name the board or MCU)[2] |
| Total rated power draw | Not documented | Rated power 350 W; input 100-120 V / 200-240 V, 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Creality Print slicing ecosystem; input shaping with an included G-sensor accelerometer. Creality does not name the firmware base on the V3 page (the sibling KE page states Creality OS is Klipper-based)[2][7] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch HD colour touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Colour touch UI; power-loss recovery; file transfer from USB drive, WLAN or Creality Cloud[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi; USB drive, WLAN and Creality Cloud file transfer[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | AI camera optional, not fitted as standard[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PET, PA6, PA-CF, PEEK and various composites[1] | PLA, TPU, PETG, ABS, PLA-CF, PETG-CF and Creality CR-carbon[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[8] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Not documented | Benchy in 14 minutes 54 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[6] |
| Review scores from major outlets (list outlet + score + date) | Not documented | Tom's Hardware rating 4.5 out of 5 in the page's structured data[6] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- 3DGence INDUSTRY F350 specification page aniwaa.com · 2026-08 · doc
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 CoreXZ 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 Plus product page creality.com · 2026-08 · vendor
- Creality Ender-3 V4 product page (full specification table) creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor