3D Printing InfoPrinter comparison
3DGence INDUSTRY F350 vs Bambu Lab X2D
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore 3DGence INDUSTRY F350 comparisonsMore Bambu Lab X2D comparisons
| Property | 3DGence INDUSTRY F350INDUSTRIAL | Bambu Lab X2DCOREXY |
|---|---|---|
| Identity | ||
| Brand | 3DGence | Bambu Lab |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | 3DGence INDUSTRY F350[1] | Bambu Lab X2D; spec PDF header "X2D Spec"[2] |
| Release date (announcement and actual shipping) | 2021[1] | Not documented |
| Launch MSRP (USD) | From $30,000 (Aniwaa quotes the same figure in EUR)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | Not documented | From $649.00 on the Bambu Lab US store, Aug 2026; the compare page shows the same $649 figure[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Part of 3DGence's INDUSTRY line; Aniwaa's page covers only the F350. No live retail listing with a USD price was found, so the $30,000 figure is a starting price, not a street price[1] | Dual-nozzle machine: a main hotend with a permanent-magnet synchronous extruder motor and an auxiliary hotend with a plain stepper motor, so the two nozzles are not equivalent. Bambu publishes four different build volumes depending on which nozzle is used, and a shorter list of materials for the auxiliary nozzle. Physical dimensions (392x406x478 mm) are shared with the P2S but the X2D is 16.25 kg against the P2S's 14.9 kg[2][4] |
| Market position: superseded? successor announced? | Not documented | Current model, launched into the slot vacated by the discontinued X1-Carbon[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 40.46 L (340 x 340 x 350 mm)[1] | Main nozzle 256 x 256 x 260 mm; auxiliary nozzle 235.5 x 256 x 256 mm; dual-nozzle printing 235.5 x 256 x 256 mm; total volume for two nozzles 256 x 256 x 260 mm. The sortable figure below is the main-nozzle volume[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1825 x 960 x 940 mm[1] | 392 x 406 x 478 mm[2] |
| Net weight (kg) | 335 kg[1] | 16.25 kg net[2] |
| Frame construction & material | Not documented | Plastic and steel chassis; plastic, glass and metal outer frame[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a heated chamber[1] | Fully enclosed with a door sensor, active chamber heating to 65 C, and a G3 + H12 HEPA + granulated coconut-shell carbon filter stack with an external exhaust fan[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 140 °C maximum chamber temperature (manufacturer specification, actively heated)[1] | Active chamber heating, maximum 65 C (manufacturer figure)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Two extruders; kinematic layout not stated on the source checked[1] | CoreXY - not stated in the spec sheet; Bambu groups the X2D with its enclosed CoreXY machines and publishes the same 20000 mm/s2 acceleration figure[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 40 mm3/s, measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two extruders[1] | Two direct-drive extruders: main extruder with hardened-steel gears driven by a Bambu high-precision permanent-magnet synchronous motor, auxiliary extruder with hardened-steel gears driven by a stepper motor[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Dual hardened-steel nozzles; 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; built-in filament cutter[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C maximum bed temperature[1] | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible steel plate, Textured PEI included; Smooth PEI, Cool Plate SuperTack and Engineering Plate supported[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Part-cooling fan, hotend cooling fan, main control board fan, chamber heat-circulation fan, auxiliary part-cooling fan and external exhaust fan, all closed-loop controlled[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Motion controller dual-core Cortex-M4 plus single-core Cortex-M7; application processor quad-core ARM with a dedicated NPU (2 TOPS per the compare page)[2][5] |
| Total rated power draw | Not documented | High-voltage version 1600 W at 220 V, low-voltage version 1100 W at 110 V; steady state 250 W printing PLA and 550 W printing PC at 25 C ambient[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch 1280x720 touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Touchscreen plus mobile app and PC app[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Dual-band Wi-Fi (802.11 a/b/g/n), built-in 8 GB eMMC and a USB port; Ethernet not available, no network kill switch, no 802.1X[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Two cameras: live-view 1920x1080 and a toolhead camera at 1600x1200[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PET, PA6, PA-CF, PEEK and various composites[1] | Main hotend: PLA, PETG, ABS, ASA, TPU, support materials, PET, PA, PC, PVA and carbon/glass-fibre reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET. Auxiliary hotend drops PPA-CF/GF and excludes PLA Aero; PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU for AMS and PA/PET support material are flagged "print with caution" on the auxiliary nozzle[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[7] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- 3DGence INDUSTRY F350 specification page aniwaa.com · 2026-08 · doc
- Bambu Lab X2D Spec (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab P2S Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab - Compare all 3D printers (A2L / X2D / H2C columns) bambulab.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor