3D Printing InfoPrinter comparison
3DGence INDUSTRY F350 vs AnkerMake M5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore 3DGence INDUSTRY F350 comparisonsMore AnkerMake M5 comparisons
| Property | 3DGence INDUSTRY F350INDUSTRIAL | AnkerMake M5BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | 3DGence | AnkerMake |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | 3DGence INDUSTRY F350[1] | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[2][3] |
| Release date (announcement and actual shipping) | 2021[1] | Not documented |
| Launch MSRP (USD) | From $30,000 (Aniwaa quotes the same figure in EUR)[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Part of 3DGence's INDUSTRY line; Aniwaa's page covers only the F350. No live retail listing with a USD price was found, so the $30,000 figure is a starting price, not a street price[1] | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[2][4][3] |
| Market position: superseded? successor announced? | Not documented | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 40.46 L (340 x 340 x 350 mm)[1] | 235 x 235 x 250 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1825 x 960 x 940 mm[1] | Not documented |
| Net weight (kg) | 335 kg[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a heated chamber[1] | Open frame[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 140 °C maximum chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Two extruders; kinematic layout not stated on the source checked[1] | Cartesian bedslinger[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 5,000 mm/s2 in high-speed mode (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 24 mm3/s (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two extruders[1] | Direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W heating block, quoted by AnkerMake as reaching 200 °C[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C maximum bed temperature[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Scratch-resistant PEI-coated magnetic build plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Automatic 7 x 7 levelling; probe technology not named[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 49 points (7 x 7)[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch colour LCD touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi and USB-C[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | 1080p camera with AI recognition and time-lapse[2][3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Assembly kit; AnkerMake quotes about 15 minutes[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PET, PA6, PA-CF, PEEK and various composites[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- 3DGence INDUSTRY F350 specification page aniwaa.com · 2026-08 · doc
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor