3D Printing InfoPrinter comparison
Snapmaker J1s vs Stratasys F370
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Snapmaker J1s comparisonsMore Stratasys F370 comparisons
| Property | Snapmaker J1sIDEX | Stratasys F370INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Snapmaker | Stratasys |
| Class | IDEX | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Snapmaker J1S High Speed IDEX 3D Printer[1][2] | Stratasys F370, part of the Stratasys F123 Series[3] |
| Release date (announcement and actual shipping) | Not documented | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[3] |
| Street price (USD; dated snapshot per entry) | $1,399.00 at MatterHackers, listed as currently unavailable with a pre-order option quoting roughly 5 weeks, checked Aug 2026[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The J1s differs from the original J1 by an additional part-cooling fan. Usable volume depends on the print mode: 300 x 200 x 200 mm in default and backup modes, 160 x 200 x 200 in copy mode, 150 x 200 x 200 in mirror mode[1][2] | Top of the series and the only one with ABS-ESD7, PC-ABS and Diran 410MF07, an Insight software licence, and ProtectAM with US DoD STIG compliance on Red Hat Enterprise Linux. Cabinet and weight are identical to the F170 and F270, so footprint tells you nothing about which model you have[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 200 x 200 mm in default and backup modes[1] | 355 x 254 x 355 mm (14 x 10 x 14 in)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 539 x 401 x 464 mm[1] | 1,626 x 864 x 711 mm (64 x 34 x 28 in)[3] |
| Net weight (kg) | 25 kg net[1] | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[3] |
| Frame construction & material | Aluminium-alloy frame with one-piece die casting and linear rails; Snapmaker quotes rail repeatability of +/-0.03 mm in X/Y and +/-0.02 mm in Z[2] | Fully enclosed office/classroom-grade cabinet, factory assembled[3] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Enclosed build chamber[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | IDEX — two independently driven extruders[1][2] | Not documented |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear rails[2] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 350 mm/s maximum (manufacturer claim)[2] | Not documented |
| Max acceleration (claimed, mm/s²) | 10,000 mm/s2 maximum (manufacturer claim)[2] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum (manufacturer claim)[1][2] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 °C maximum (manufacturer claim)[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Custom dual-sided PEI glass plate: glossy glass on one face, PEI coating on the other[1][2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 3-point bed levelling, which Snapmaker contrasts with 9-16 point systems; assisted calibration quoted at about 10 minutes[2] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | 1 GB RAM, 8 GB eMMC; the 5-inch display runs Android[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz, 4.4 A max input; DC 24 V, 400 W max output[1] | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[3] |
| Total rated power draw | 400 W maximum output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Snapmaker; the supplied slicer is Luban, with third-party software supported[1] | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch Android display, 1280 x 720[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB cable, USB flash drive[1] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF[1] | PLA, ABS-ESD7, ABS-M30, ASA, Diran 410MF072, FDM TPU 92A, PC-ABS, ABS-CF10, with QSR soluble support. Diran and PLA use breakaway rather than soluble support[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Less than 50 dBA claimed by the manufacturer. No independent measurement; distance and method not stated[1] | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Snapmaker J1S High Speed IDEX 3D Printer listing matterhackers.com · 2026-08 · vendor
- Snapmaker J1s product page snapmaker.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc