Printer comparison

Roboze ARGO 500 vs Snapmaker J1s

Compare hardware, build volume, printing specifications, dated prices and sources.

Roboze ARGO 500 guide Snapmaker J1s guide

First printerSecond printer

2 selected · all documented properties

Open these two in the interactive comparison More Roboze ARGO 500 comparisons More Snapmaker J1s comparisons

Roboze ARGO 500 vs Snapmaker J1s — documented properties and sources
Property	Roboze ARGO 500INDUSTRIAL	Snapmaker J1sIDEX
Identity
Brand	Roboze	Snapmaker
Class	INDUSTRIAL	IDEX
Identity & Market
Manufacturer & exact marketed model name (verify the exact product identity first)	Roboze ARGO 500 3D Printer[1]	Snapmaker J1S High Speed IDEX 3D Printer[2][3]
Street price (USD; dated snapshot per entry)	Not documented	$1,399.00 at MatterHackers, listed as currently unavailable with a pre-order option quoting roughly 5 weeks, checked Aug 2026[2]
Variants & sibling models — and how to tell them apart (spec-contamination risk)	Dual-extruder counterpart to the single-extruder ARGO 350. Differences that show in a spec box: 500 mm cube vs 350 x 300 x 300, 1700 kg vs 1200 kg, 11-inch vs 7-inch screen, 0.4 and 0.6 mm nozzles vs 0.4 mm only. Nozzle and chamber temperatures are identical on both. Pricing note: Not published. Top 3D Shop lists it as available on backorder with a 3-5 week lead time but requires a quote request rather than showing a price, checked Aug 2026[1][4]	The J1s differs from the original J1 by an additional part-cooling fan. Usable volume depends on the print mode: 300 x 200 x 200 mm in default and backup modes, 160 x 200 x 200 in copy mode, 150 x 200 x 200 in mirror mode[2][3]
Physical & Frame
Build volume X×Y×Z (mm) — advertised vs actually usable	500 x 500 x 500 mm[1]	300 x 200 x 200 mm in default and backup modes[2]
Machine footprint (mm) & clearance needed (cable/spool overhang)	1935 x 1436 x 2375 mm[1]	539 x 401 x 464 mm[2]
Net weight (kg)	1700 kg[1]	25 kg net[2]
Frame construction & material	Fully assembled, made in Italy[1]	Aluminium-alloy frame with one-piece die casting and linear rails; Snapmaker quotes rail repeatability of +/-0.03 mm in X/Y and +/-0.02 mm in Z[3]
Enclosure: open / enclosed; panel material; door/lid	Enclosed[1]	Not documented
Passive chamber temperature reached (if enclosed; measured values preferred)	180 °C chamber temperature (manufacturer specification, actively heated)[1]	Not documented
Kinematics & Motion Hardware
Kinematics (bedslinger i3 / CoreXY / other)	CoreXY, dual extruder[1]	IDEX — two independently driven extruders[2][3]
X-axis guide type (rods / linear rails / V-wheels; size)	Not documented	Linear rails[3]
Speed & Acceleration
Max print speed (claimed, mm/s)	Not documented	350 mm/s maximum (manufacturer claim)[3]
Max acceleration (claimed, mm/s²)	Not documented	10,000 mm/s2 maximum (manufacturer claim)[3]
Extruder
Type (direct drive / bowden) & design name	Two extruders, 1.75 mm filament[1]	Not documented
Hotend & Nozzle
Max nozzle temp claimed AND firmware max temp limit (both values)	450 °C maximum nozzle temperature (manufacturer specification)[1]	300 °C maximum (manufacturer claim)[2][3]
Stock nozzle size & sizes included in box	0.4 and 0.6 mm[1]	Not documented
Heated Bed & Surface
Max bed temp claimed AND firmware limit	Not documented	100 °C maximum (manufacturer claim)[2]
Bed surface (material, texture, coating), single/double-sided	Removable polymer build sheets held by vacuum[1]	Custom dual-sided PEI glass plate: glossy glass on one face, PEI coating on the other[2][3]
Leveling & Z-Offset
Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe)	Not documented	3-point bed levelling, which Snapmaker contrasts with 9-16 point systems; assisted calibration quoted at about 10 minutes[3]
Electronics & Power
Host computer (SoC, RAM, storage) if firmware runs on embedded Linux	Not documented	1 GB RAM, 8 GB eMMC; the 5-inch display runs Android[2]
Input voltage (110/220 V, switch or auto)	Not documented	AC 100-240 V, 50/60 Hz, 4.4 A max input; DC 24 V, 400 W max output[2]
Total rated power draw	Not documented	400 W maximum output[2]
Firmware & Openness
Firmware base & current version (Klipper fork / Marlin fork / proprietary)	Proprietary; the recommended software is Roboze Prometheus[1]	Not named by Snapmaker; the supplied slicer is Luban, with third-party software supported[2]
Connectivity, UI & Camera
Display: size, type, touch?	11-inch colour touchscreen[1]	5-inch Android display, 1280 x 720[2]
WiFi (band/standard), Ethernet, USB ports, SD/flash-drive	USB, Ethernet, Wi-Fi[1]	Wi-Fi, USB cable, USB flash drive[2]
Materials Support
Officially supported filament list	PEEK, Carbon PEEK, Carbon PA, ULTEM AM9085F, PC, Functional-nylon, ABS-ESD, PP, Flex-TPU, Strong-ABS, Ultra-PLA and others[1]	PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF[2]
Noise & Power Consumption
Noise: claimed dB and independently measured dB (distance/method)	Not documented	Less than 50 dBA claimed by the manufacturer. No independent measurement; distance and method not stated[2]
Independently Measured Performance
Dimensional accuracy measurements (third-party, with numbers)	XY accuracy 0.01 mm, Z accuracy 0.025 mm (manufacturer specification)[1]	Not documented

Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.

Sources for this comparison

Roboze ARGO 500 product listing top3dshop.com · 2026-08 · vendor
Snapmaker J1S High Speed IDEX 3D Printer listing matterhackers.com · 2026-08 · vendor
Snapmaker J1s product page snapmaker.com · 2026-08 · vendor
Roboze ARGO 350 product listing top3dshop.com · 2026-08 · vendor