3D Printing InfoPrinter comparison
Raise3D Pro3 vs Sovol SV08 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Raise3D Pro3 comparisonsMore Sovol SV08 Max comparisons
| Property | Raise3D Pro3IDEX | Sovol SV08 MaxCOREXY |
|---|---|---|
| Identity | ||
| Brand | Raise3D | Sovol |
| Class | IDEX | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Raise3D Pro3 3D Printer[1][2] | Sovol SV08 Max 3D Printer[3][4] |
| Street price (USD; dated snapshot per entry) | $2,999.00 on Raise3D's own store, available, checked Aug 2026[2] | $1,099.00 on sovol3d.com against a $1,299.00 compare-at price (15% off), in stock, checked Aug 2026[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A crowded family with materially different prices: Pro3 $2,999, Pro3 Hyper Speed Package $4,999, Pro3 HS $4,599, Pro3 Plus HS $6,099. Build volume also changes with head count: 300 x 300 x 300 mm single-head, 255 x 300 x 300 mm dual-head. Raise3D's smaller E-series (E2 $1,999, E2CF $2,499, E3 $2,499) and the resin DF2 line are separate machines entirely[2][5][1] | Much larger sibling of the SV08. Differences that matter in a spec box: 500x500x500 vs 350x350x345, 50 vs 30 mm3/s, TMC5160 XY drivers vs TMC2209, CAN bus, HDMI output, dual 0.4 mm nozzles in the box, and a separately sold chamber-heating module. A chamber heating module for the SV08 Max is listed at $69[3][6][7][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 300 mm with one extruder; 255 x 300 x 300 mm with both[1] | 500 x 500 x 500 mm advertised[3][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 620 x 626 x 760 mm[1] | 700 x 710 x 750 mm excluding the spool holder. Shipping cartons: 810 x 820 x 360 mm plus a 775 x 728 x 155 mm enclosure-kit box[3][6] |
| Net weight (kg) | 52.5 kg net[1] | Not documented |
| Frame construction & material | Fully assembled enclosed professional chassis[1] | Aluminium-extrusion CoreXY frame supplied as a kit; Sovol ships it in two cartons, one of which is an enclosure kit[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a HEPA and activated-charcoal filter[1] | Enclosure kit shipped with the machine (separate carton). A chamber-heating module is sold separately at $69[3][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Dual-head with an electronic lifting system[1] | CoreXY[3][6] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Z axis 4 x TMC2209; A axis 1 x TMC5160; B axis 1 x TMC5160. Toolhead communication over CAN bus[3][6] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 700 mm/s maximum (manufacturer claim)[3][6] |
| Max travel speed | Print-head travel speed 30-150 mm/s (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 40,000 mm/s2 maximum (manufacturer claim)[3][6] |
| Max volumetric flow claimed (mm³/s) | Not documented | 50 mm3/s maximum (manufacturer claim)[3][6] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual print heads, 1.75 mm filament[1] | Direct drive with auxiliary (assisted) filament feeding[3][6] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heater. Two 0.4 mm nozzles supplied as standard; 0.4/0.6/0.8 mm optional[3][6] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum nozzle temperature[1] | <=300 °C claimed[3][6] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.2, 0.6, 0.8 and 1.0 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum build-plate temperature, silicone heater[1] | <=100 °C claimed[3][6] |
| Bed surface (material, texture, coating), single/double-sided | Flexible steel plate with BuildTak[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Mesh levelling with flatness detection[1] | Not stated on the SV08 Max page; the SV08 family uses an inductive sensor plus pressure sensor[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament runout detection plus filament tangle/clog detection. Sovol does not describe the tangle or clog mechanism[3][6] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | HEPA filter with activated charcoal[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Motion controller Atmel ARM Cortex-M4 at 120 MHz with FPU; logic controller NXP ARM Cortex-A9 quad-core at 1 GHz[1] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | 1 GB RAM, 8 GB onboard flash, embedded Linux[1] | 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[3][6] |
| Input voltage (110/220 V, switch or auto) | 100-240 V AC, 50/60 Hz input; 24 V DC, 600 W output[1] | Not documented |
| Total rated power draw | 600 W output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Embedded Linux on the logic controller; slicing is ideaMaker. Firmware base not published[1] | Klipper (3DJake's table renders it as "Clipper"). OrcaSlicer is the supported slicer[3][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen, 1024 x 600[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB 2.0 x2; live camera[1] | USB, Wi-Fi 2.4 GHz and 5 GHz, HDMI, Ethernet[3][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Live camera fitted; resolution not published[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss resume printing supported; mechanism not published[3][6] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, nylon, composites and metal/wood-filled grades[1] | 1.75 mm filament; Sovol does not publish a per-material list on this page[3][6] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Under 55 dB(A) while printing, manufacturer figure. No independent measurement; distance and method not stated[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | XYZ step size 0.78125 / 0.78125 / 0.078125 micron (manufacturer specification, not an accuracy measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Raise3D Pro3 3D Printer listing matterhackers.com · 2026-08 · vendor
- Raise3D 3D-printer collection product feed (live prices) shop.raise3d.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Raise3D E2 3D Printer product page shop.raise3d.com · 2026-08 · vendor
- Sovol SV08 Max technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor