3D Printing InfoPrinter comparison
QIDI X-Smart 3 vs UltiMaker Factor 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI X-Smart 3 comparisonsMore UltiMaker Factor 4 comparisons
| Property | QIDI X-Smart 3COREXY | UltiMaker Factor 4INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | QIDI | UltiMaker |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI X-Smart 3, listed in QIDI navigation as X-Smart3[1][2] | UltiMaker Factor 4[3] |
| Release date (announcement and actual shipping) | Not published by QIDI on the pages checked (Aug 2026)[1][2] | Announced 22 April 2024, shown at HANNOVER MESSE 2024 (22-26 April) and TCT Asia (7-9 May 2024)[3] |
| Launch MSRP (USD) | Not documented | Starting at approximately $20,000[3] |
| Street price (USD; dated snapshot per entry) | $399 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026[2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Entry model of the 3-series. Unlike the X-Plus 3 and X-Max 3 it has no heated chamber, a 300 °C rather than 350 °C hotend, a brass rather than copper-alloy/hardened-steel nozzle head, and no Ethernet. It shares the Cortex-A53 board with them, so control-board specs must not be read as shared print specs[1][4][5] | Shares the 330 x 240 x 300 mm envelope with the UltiMaker S5, S7 and S8, which is the single most contaminated figure in UltiMaker's range. What separates the Factor 4 is the actively controlled 70 °C build volume, the climate-controlled 6-spool material station holding humidity below 15%, and HEPA filtration. UltiMaker also sells a Factor 4 Plus[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 175 x 180 x 170 mm advertised[1][2] | 330 x 240 x 300 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 370 x 362 x 397 mm[1] | Not documented |
| Net weight (kg) | 10.5 kg[1] | Not documented |
| Frame construction & material | QIDI publishes no frame-material breakdown for this model[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | No heated chamber. 3DJake's table records "Heated chamber: No"; QIDI does not describe an enclosure for this model[1] | Enclosed with actively controlled chamber airflow and a HEPA filter[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Build volume temperature controlled up to 70 °C with actively controlled chamber airflow (manufacturer specification)[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1][2] | Direct-drive dual extrusion; kinematic layout not stated in the source checked[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | <=500 mm/s (manufacturer claim)[1][2] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 (manufacturer claim)[2] | Not documented |
| Max volumetric flow claimed (mm³/s) | 30 mm3/s extruder flow (manufacturer claim)[1][2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder, single, 1.75 mm filament[1][2] | Direct-drive dual extrusion[3] |
| Filament diameter | Not documented | 2.85 mm[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle head. 0.4 mm stock, 0.2/0.6/0.8 mm optional[1][2] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed[1][2] | 340 °C maximum with the high-temperature print core (manufacturer claim)[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Brass[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed[1][2] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Double-sided flexible magnetic RF plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 16-point automatic bed levelling per QIDI's US page; probe technology not named[2] | Not documented |
| Mesh grid size (probe point count — firmware evidence) | 16 points (QIDI's US page). Not verified against firmware[2] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Automatic climate-controlled material handling and storage station holding humidity below 15%, storing up to six spools[3] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | HEPA filter[3] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[1] | Not documented |
| Total rated power draw | 350 W rated[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[2] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB. No Ethernet listed for this model[1][2] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | UltiMaker-branded PPS CF, PLA, Tough PLA, Nylon, PETG, PET CF and PVA, plus validated third-party materials from BASF Forward AM, Kimya, Polymaker, LEHVOSS and Jabil[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage (QIDI standard store terms)[6] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy within +/-0.2 mm or +/-0.2% of feature nominal length; UltiMaker states it tested over 95% print-completion success. Manufacturer figures, not independent measurements[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Smart 3 official US page qidiusa.com · 2026-08 · vendor
- UltiMaker Factor 4: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor