3D Printing InfoPrinter comparison
QIDI X-Plus 3 vs Snapmaker J1s
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI X-Plus 3 comparisonsMore Snapmaker J1s comparisons
| Property | QIDI X-Plus 3COREXY | Snapmaker J1sIDEX |
|---|---|---|
| Identity | ||
| Brand | QIDI | Snapmaker |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI X-Plus 3, listed in QIDI navigation as X-Plus3[1][2] | Snapmaker J1S High Speed IDEX 3D Printer[3][4] |
| Release date (announcement and actual shipping) | Not published by QIDI on the pages checked (Aug 2026)[1][2] | Not documented |
| Street price (USD; dated snapshot per entry) | $699 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026. 3DJake lists the model as sold out[2][1] | $1,399.00 at MatterHackers, listed as currently unavailable with a pre-order option quoting roughly 5 weeks, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two headline-speed figures circulate for this model: QIDI's own US page says 600 mm/s and 35 mm3/s, 3DJake's spec table says <=500 mm/s and 30 mm3/s. This is exactly the kind of sibling contamination the 3-series suffers (X-Max 3 is 600 mm/s / 35 mm3/s). Siblings: X-Max 3 (325x325x315, 900 W) and X-Smart 3 (175x180x170, no chamber heat, 300 °C)[1][2][5][6] | The J1s differs from the original J1 by an additional part-cooling fan. Usable volume depends on the print mode: 300 x 200 x 200 mm in default and backup modes, 160 x 200 x 200 in copy mode, 150 x 200 x 200 in mirror mode[3][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 280 x 280 x 270 mm advertised[1][2] | 300 x 200 x 200 mm in default and backup modes[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 511 x 527 x 529 mm[1] | 539 x 401 x 464 mm[3] |
| Net weight (kg) | 24.3 kg net[1] | 25 kg net[3] |
| Frame construction & material | All-metal frame per QIDI's US page; no further breakdown published[2] | Aluminium-alloy frame with one-piece die casting and linear rails; Snapmaker quotes rail repeatability of +/-0.03 mm in X/Y and +/-0.02 mm in Z[4] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a heated chamber[1][2] | Not documented |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C, independent chamber heating (manufacturer claim)[1][2] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1] | IDEX — two independently driven extruders[3][4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear optical axis of high-strength steel[1] | Linear rails[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double Z axis[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Conflicting manufacturer claims: QIDI's US page says 600 mm/s, 3DJake's spec table says <=500 mm/s. The lower, more conservative figure is used as the sortable value[1][2] | 350 mm/s maximum (manufacturer claim)[4] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 (manufacturer claim)[2] | 10,000 mm/s2 maximum (manufacturer claim)[4] |
| Max volumetric flow claimed (mm³/s) | Conflicting: 30 mm3/s (3DJake) vs 35 mm3/s (QIDI US page). Lower figure used[1][2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | High-flow direct-drive extruder, 1.75 mm filament[1][2] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating core. Copper-alloy nozzle head for normal materials, hardened-steel nozzle head for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed[1][2] | 300 °C maximum (manufacturer claim)[3][4] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed[1][2] | 100 °C maximum (manufacturer claim)[3] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided flexible magnetic RF plate[1] | Custom dual-sided PEI glass plate: glossy glass on one face, PEI coating on the other[3][4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; probe technology not named[2] | 3-point bed levelling, which Snapmaker contrasts with 9-16 point systems; assisted calibration quoted at about 10 minutes[4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[1][2] | 1 GB RAM, 8 GB eMMC; the 5-inch display runs Android[3] |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[1] | AC 100-240 V, 50/60 Hz, 4.4 A max input; DC 24 V, 400 W max output[3] |
| Total rated power draw | 800 W rated[1] | 400 W maximum output[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[2] | Not named by Snapmaker; the supplied slicer is Luban, with third-party software supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[1] | 5-inch Android display, 1280 x 720[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi (150M 2.4G), Ethernet, USB flash drive[1] | Wi-Fi, USB cable, USB flash drive[3] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Less than 50 dBA claimed by the manufacturer. No independent measurement; distance and method not stated[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage (QIDI standard store terms)[7] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Plus 3 official US page qidiusa.com · 2026-08 · vendor
- Snapmaker J1S High Speed IDEX 3D Printer listing matterhackers.com · 2026-08 · vendor
- Snapmaker J1s product page snapmaker.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor