3D Printing InfoPrinter comparison
QIDI X-Plus 3 vs Raise3D Pro3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI X-Plus 3 comparisonsMore Raise3D Pro3 comparisons
| Property | QIDI X-Plus 3COREXY | Raise3D Pro3IDEX |
|---|---|---|
| Identity | ||
| Brand | QIDI | Raise3D |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI X-Plus 3, listed in QIDI navigation as X-Plus3[1][2] | Raise3D Pro3 3D Printer[3][4] |
| Release date (announcement and actual shipping) | Not published by QIDI on the pages checked (Aug 2026)[1][2] | Not documented |
| Street price (USD; dated snapshot per entry) | $699 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026. 3DJake lists the model as sold out[2][1] | $2,999.00 on Raise3D's own store, available, checked Aug 2026[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two headline-speed figures circulate for this model: QIDI's own US page says 600 mm/s and 35 mm3/s, 3DJake's spec table says <=500 mm/s and 30 mm3/s. This is exactly the kind of sibling contamination the 3-series suffers (X-Max 3 is 600 mm/s / 35 mm3/s). Siblings: X-Max 3 (325x325x315, 900 W) and X-Smart 3 (175x180x170, no chamber heat, 300 °C)[1][2][5][6] | A crowded family with materially different prices: Pro3 $2,999, Pro3 Hyper Speed Package $4,999, Pro3 HS $4,599, Pro3 Plus HS $6,099. Build volume also changes with head count: 300 x 300 x 300 mm single-head, 255 x 300 x 300 mm dual-head. Raise3D's smaller E-series (E2 $1,999, E2CF $2,499, E3 $2,499) and the resin DF2 line are separate machines entirely[4][7][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 280 x 280 x 270 mm advertised[1][2] | 300 x 300 x 300 mm with one extruder; 255 x 300 x 300 mm with both[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 511 x 527 x 529 mm[1] | 620 x 626 x 760 mm[3] |
| Net weight (kg) | 24.3 kg net[1] | 52.5 kg net[3] |
| Frame construction & material | All-metal frame per QIDI's US page; no further breakdown published[2] | Fully assembled enclosed professional chassis[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a heated chamber[1][2] | Enclosed with a HEPA and activated-charcoal filter[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C, independent chamber heating (manufacturer claim)[1][2] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1] | Dual-head with an electronic lifting system[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear optical axis of high-strength steel[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double Z axis[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Conflicting manufacturer claims: QIDI's US page says 600 mm/s, 3DJake's spec table says <=500 mm/s. The lower, more conservative figure is used as the sortable value[1][2] | Not documented |
| Max travel speed | Not documented | Print-head travel speed 30-150 mm/s (manufacturer figure)[3] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 (manufacturer claim)[2] | Not documented |
| Max volumetric flow claimed (mm³/s) | Conflicting: 30 mm3/s (3DJake) vs 35 mm3/s (QIDI US page). Lower figure used[1][2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | High-flow direct-drive extruder, 1.75 mm filament[1][2] | Dual print heads, 1.75 mm filament[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating core. Copper-alloy nozzle head for normal materials, hardened-steel nozzle head for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed[1][2] | 300 °C maximum nozzle temperature[3] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.2, 0.6, 0.8 and 1.0 mm available[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed[1][2] | 120 °C maximum build-plate temperature, silicone heater[3] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided flexible magnetic RF plate[1] | Flexible steel plate with BuildTak[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; probe technology not named[2] | Mesh levelling with flatness detection[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | HEPA filter with activated charcoal[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Motion controller Atmel ARM Cortex-M4 at 120 MHz with FPU; logic controller NXP ARM Cortex-A9 quad-core at 1 GHz[3] |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[1][2] | 1 GB RAM, 8 GB onboard flash, embedded Linux[3] |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[1] | 100-240 V AC, 50/60 Hz input; 24 V DC, 600 W output[3] |
| Total rated power draw | 800 W rated[1] | 600 W output[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[2] | Embedded Linux on the logic controller; slicing is ideaMaker. Firmware base not published[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[1] | 7-inch touchscreen, 1024 x 600[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi (150M 2.4G), Ethernet, USB flash drive[1] | Wi-Fi, Ethernet, USB 2.0 x2; live camera[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Live camera fitted; resolution not published[3] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, nylon, composites and metal/wood-filled grades[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 55 dB(A) while printing, manufacturer figure. No independent measurement; distance and method not stated[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage (QIDI standard store terms)[8] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XYZ step size 0.78125 / 0.78125 / 0.078125 micron (manufacturer specification, not an accuracy measurement)[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Plus 3 official US page qidiusa.com · 2026-08 · vendor
- Raise3D Pro3 3D Printer listing matterhackers.com · 2026-08 · vendor
- Raise3D 3D-printer collection product feed (live prices) shop.raise3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- Raise3D E2 3D Printer product page shop.raise3d.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor