3D Printing InfoPrinter comparison
QIDI X-Max 3 vs Stratasys F120
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI X-Max 3 comparisonsMore Stratasys F120 comparisons
| Property | QIDI X-Max 3COREXY | Stratasys F120INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | QIDI | Stratasys |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI X-Max 3, listed by QIDI as "Qidi Tech X-Max 3 3D Printer" and in navigation as X-Max3[1][2] | Stratasys F120, part of the Stratasys F123 Series[3] |
| Release date (announcement and actual shipping) | Not published by QIDI; the product page carries a discontinuation notice rather than a launch date (checked Aug 2026)[1] | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[3] |
| Street price (USD; dated snapshot per entry) | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock[1][4] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same-generation siblings X-Plus 3 (280x280x270, 500 mm/s, 800 W) and X-Smart 3 (175x180x170, no chamber heating, 300 °C, 350 W). All three share the Cortex-A53 1.5 GHz / 1 GB DDR3 / 8 GB eMMC control board, so shared-board specs are not evidence of shared print specs. Replaced by the Max4[2][5][6][7] | The F120 is the odd one out in the series: smaller cabinet (889 x 870 x 721 mm, 124 kg vs 1,626 x 864 x 711 mm, 227 kg), two external material coil boxes rather than internal spool bays, only two model materials, and no 0.127 mm layer option. Same build size as the F170 but not the same machine[3] |
| Market position: superseded? successor announced? | Discontinued and out of production; QIDI directs buyers to the Max4[1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 325 x 325 x 315 mm advertised[1][2][4] | 254 x 254 x 254 mm (10 x 10 x 10 in)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 553 x 553 x 601 mm[2][4] | 889 x 870 x 721 mm (35 x 35 x 29 in)[3] |
| Net weight (kg) | 30.2 kg net[2][4] | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[3] |
| Frame construction & material | Enclosed CoreXY chassis, fully assembled from the factory. QIDI does not publish a frame-material breakdown[2] | Fully enclosed office/classroom-grade cabinet, factory assembled[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed, with a chamber circulation blower and activated-carbon air filter[2] | Enclosed build chamber[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C maximum, independent chamber heating (manufacturer claim)[1][2] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[2] | Not documented |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear optical axis (polished steel rod) of high-strength steel[2] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double Z axis[2] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | <=600 mm/s (manufacturer claim)[1][2][4] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 35 mm3/s extruder flow (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | High-flow direct-drive extruder; QIDI states a 9.5:1 gear ratio for this model[1][2] | Not documented |
| Gear ratio & drive gear material | 9.5:1[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating core. Two interchangeable nozzle-head sets shipped: copper alloy for standard materials, hardened steel for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[1][2] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed[1][2][4] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed[2][4] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Double-sided flexible magnetic plate (QIDI's "HF" plate)[1][2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling via Klipper adaptive meshing; probe technology not named by QIDI[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[2] | Not documented |
| Cooling & Air Handling | ||
| Auxiliary part-cooling fan? | Additional (auxiliary) cooling fan fitted[2] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Chamber circulation blower with activated-carbon air filter[2] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[1][2] | Not documented |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[2] | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[3] |
| Total rated power draw | 900 W rated[2][4] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper with the Fluidd web console. Fork and version not published[1] | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi (QIDI states 150M 2.4G), Ethernet, USB flash drive[2] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[3] |
| Materials Support | ||
| Officially supported filament list | ABS, PLA, PETG, TPU, nylon, carbon fibre, PC[4] | ABS-M30 and ASA, with SR-30 support material. Notably the F120 does NOT get PLA, FDM TPU 92A or ABS-CF10, and cannot use the 0.127 mm layer height[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- Qidi Tech X-Max 3 FDM 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor