3D Printing InfoPrinter comparison
QIDI X-Max 3 vs Sovol Zero
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI X-Max 3 comparisonsMore Sovol Zero comparisons
| Property | QIDI X-Max 3COREXY | Sovol ZeroCOREXY |
|---|---|---|
| Identity | ||
| Brand | QIDI | Sovol |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI X-Max 3, listed by QIDI as "Qidi Tech X-Max 3 3D Printer" and in navigation as X-Max3[1][2] | Sovol Zero 3D Printer[3][4] |
| Release date (announcement and actual shipping) | Not published by QIDI; the product page carries a discontinuation notice rather than a launch date (checked Aug 2026)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock[1][5] | $389.00 on sovol3d.com against a $499.00 compare-at price, but marked Sold out, checked Aug 2026. Sovol's own announcement article quotes from $359.00[3][4][6] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same-generation siblings X-Plus 3 (280x280x270, 500 mm/s, 800 W) and X-Smart 3 (175x180x170, no chamber heating, 300 °C, 350 W). All three share the Cortex-A53 1.5 GHz / 1 GB DDR3 / 8 GB eMMC control board, so shared-board specs are not evidence of shared print specs. Replaced by the Max4[2][7][8][9] | No sibling variants at the time of checking. Sovol positions it against the Voron 0 and Bambu Lab P1P. Note the bed and nozzle limits are higher than the larger SV08 (120 vs 100 °C bed, 350 vs 300 °C nozzle), so SV08 figures must not be carried across[3][6][10] |
| Market position: superseded? successor announced? | Discontinued and out of production; QIDI directs buyers to the Max4[1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 325 x 325 x 315 mm advertised[1][2][5] | 152.4 x 152.4 x 152.5 mm advertised[3][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 553 x 553 x 601 mm[2][5] | 345 x 420 x 475 mm[3] |
| Net weight (kg) | 30.2 kg net[2][5] | Not documented |
| Frame construction & material | Enclosed CoreXY chassis, fully assembled from the factory. QIDI does not publish a frame-material breakdown[2] | Full linear rails on all axes; CoreXY with two motors sharing the moving mass[6] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed, with a chamber circulation blower and activated-carbon air filter[2] | Fully enclosed[6] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C maximum, independent chamber heating (manufacturer claim)[1][2] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[2] | CoreXY[6] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear optical axis (polished steel rod) of high-strength steel[2] | Linear rails on all axes[6] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double Z axis[2] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | <=600 mm/s (manufacturer claim)[1][2][5] | 1200 mm/s maximum (manufacturer claim). Sovol's own material acknowledges 700 mm/s as the realistic figure for detailed prints[3][6] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 (manufacturer claim)[1] | 40,000 mm/s2 maximum (manufacturer claim)[3][6] |
| Max volumetric flow claimed (mm³/s) | 35 mm3/s extruder flow (manufacturer claim)[2] | <=50 mm3/s (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | High-flow direct-drive extruder; QIDI states a 9.5:1 gear ratio for this model[1][2] | Planetary-gear direct-drive extruder[3] |
| Gear ratio & drive gear material | 9.5:1[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating core. Two interchangeable nozzle-head sets shipped: copper alloy for standard materials, hardened steel for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[1][2] | Ceramic heating plate. Brass or hardened-steel nozzles in 0.2/0.4/0.6/0.8/1.0 mm[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed[1][2][5] | <=350 °C claimed[3][6] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass or hardened steel, buyer's choice[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed[2][5] | <=120 °C claimed; Sovol states the bed is AC-heated[3][6] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided flexible magnetic plate (QIDI's "HF" plate)[1][2] | Double-sided PEI steel plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling via Klipper adaptive meshing; probe technology not named by QIDI[1] | Eddy-current scanning combined with pressure (force) sensing — Sovol describes it as an inductive sensor plus force sensor[3][6] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[2] | Filament sensor fitted; type and location not published[3][6] |
| Cooling & Air Handling | ||
| Auxiliary part-cooling fan? | Additional (auxiliary) cooling fan fitted[2] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Chamber circulation blower with activated-carbon air filter[2] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[1][2] | Allwinner H616, 1 GB RAM, 8 GB eMMC, 64-bit[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 150 W / 24 V (this is the DC supply; the bed is separately AC-heated per Sovol)[3][6] |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[2] | Not documented |
| Total rated power draw | 900 W rated[2][5] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper with the Fluidd web console. Fork and version not published[1] | Not named on the product page beyond OTA updates and OrcaSlicer support; Sovol markets the machine as open source[3][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi (QIDI states 150M 2.4G), Ethernet, USB flash drive[2] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 not supported)[3][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera for monitoring; resolution not published[3][6] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Arrives preassembled[6] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[3][6] |
| Materials Support | ||
| Officially supported filament list | ABS, PLA, PETG, TPU, nylon, carbon fibre, PC[5] | PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Sovol Zero 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Qidi Tech X-Max 3 FDM 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Sovol Zero announcement article (Sovol blog) sovol3d.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor