3D Printing InfoPrinter comparison
QIDI X-Max 3 vs Raise3D Pro3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI X-Max 3 comparisonsMore Raise3D Pro3 comparisons
| Property | QIDI X-Max 3COREXY | Raise3D Pro3IDEX |
|---|---|---|
| Identity | ||
| Brand | QIDI | Raise3D |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI X-Max 3, listed by QIDI as "Qidi Tech X-Max 3 3D Printer" and in navigation as X-Max3[1][2] | Raise3D Pro3 3D Printer[3][4] |
| Release date (announcement and actual shipping) | Not published by QIDI; the product page carries a discontinuation notice rather than a launch date (checked Aug 2026)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock[1][5] | $2,999.00 on Raise3D's own store, available, checked Aug 2026[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same-generation siblings X-Plus 3 (280x280x270, 500 mm/s, 800 W) and X-Smart 3 (175x180x170, no chamber heating, 300 °C, 350 W). All three share the Cortex-A53 1.5 GHz / 1 GB DDR3 / 8 GB eMMC control board, so shared-board specs are not evidence of shared print specs. Replaced by the Max4[2][6][7][8] | A crowded family with materially different prices: Pro3 $2,999, Pro3 Hyper Speed Package $4,999, Pro3 HS $4,599, Pro3 Plus HS $6,099. Build volume also changes with head count: 300 x 300 x 300 mm single-head, 255 x 300 x 300 mm dual-head. Raise3D's smaller E-series (E2 $1,999, E2CF $2,499, E3 $2,499) and the resin DF2 line are separate machines entirely[4][9][3] |
| Market position: superseded? successor announced? | Discontinued and out of production; QIDI directs buyers to the Max4[1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 325 x 325 x 315 mm advertised[1][2][5] | 300 x 300 x 300 mm with one extruder; 255 x 300 x 300 mm with both[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 553 x 553 x 601 mm[2][5] | 620 x 626 x 760 mm[3] |
| Net weight (kg) | 30.2 kg net[2][5] | 52.5 kg net[3] |
| Frame construction & material | Enclosed CoreXY chassis, fully assembled from the factory. QIDI does not publish a frame-material breakdown[2] | Fully assembled enclosed professional chassis[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed, with a chamber circulation blower and activated-carbon air filter[2] | Enclosed with a HEPA and activated-charcoal filter[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C maximum, independent chamber heating (manufacturer claim)[1][2] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[2] | Dual-head with an electronic lifting system[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear optical axis (polished steel rod) of high-strength steel[2] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double Z axis[2] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | <=600 mm/s (manufacturer claim)[1][2][5] | Not documented |
| Max travel speed | Not documented | Print-head travel speed 30-150 mm/s (manufacturer figure)[3] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 35 mm3/s extruder flow (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | High-flow direct-drive extruder; QIDI states a 9.5:1 gear ratio for this model[1][2] | Dual print heads, 1.75 mm filament[3] |
| Gear ratio & drive gear material | 9.5:1[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating core. Two interchangeable nozzle-head sets shipped: copper alloy for standard materials, hardened steel for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[1][2] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed[1][2][5] | 300 °C maximum nozzle temperature[3] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.2, 0.6, 0.8 and 1.0 mm available[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed[2][5] | 120 °C maximum build-plate temperature, silicone heater[3] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided flexible magnetic plate (QIDI's "HF" plate)[1][2] | Flexible steel plate with BuildTak[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling via Klipper adaptive meshing; probe technology not named by QIDI[1] | Mesh levelling with flatness detection[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[2] | Not documented |
| Cooling & Air Handling | ||
| Auxiliary part-cooling fan? | Additional (auxiliary) cooling fan fitted[2] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Chamber circulation blower with activated-carbon air filter[2] | HEPA filter with activated charcoal[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Motion controller Atmel ARM Cortex-M4 at 120 MHz with FPU; logic controller NXP ARM Cortex-A9 quad-core at 1 GHz[3] |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[1][2] | 1 GB RAM, 8 GB onboard flash, embedded Linux[3] |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[2] | 100-240 V AC, 50/60 Hz input; 24 V DC, 600 W output[3] |
| Total rated power draw | 900 W rated[2][5] | 600 W output[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper with the Fluidd web console. Fork and version not published[1] | Embedded Linux on the logic controller; slicing is ideaMaker. Firmware base not published[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[2] | 7-inch touchscreen, 1024 x 600[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi (QIDI states 150M 2.4G), Ethernet, USB flash drive[2] | Wi-Fi, Ethernet, USB 2.0 x2; live camera[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Live camera fitted; resolution not published[3] |
| Materials Support | ||
| Officially supported filament list | ABS, PLA, PETG, TPU, nylon, carbon fibre, PC[5] | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, nylon, composites and metal/wood-filled grades[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 55 dB(A) while printing, manufacturer figure. No independent measurement; distance and method not stated[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XYZ step size 0.78125 / 0.78125 / 0.078125 micron (manufacturer specification, not an accuracy measurement)[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Raise3D Pro3 3D Printer listing matterhackers.com · 2026-08 · vendor
- Raise3D 3D-printer collection product feed (live prices) shop.raise3d.com · 2026-08 · vendor
- Qidi Tech X-Max 3 FDM 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Raise3D E2 3D Printer product page shop.raise3d.com · 2026-08 · vendor