3D Printing InfoPrinter comparison
QIDI Q1 Pro vs Snapmaker U1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI Q1 Pro comparisonsMore Snapmaker U1 comparisons
| Property | QIDI Q1 ProCOREXY | Snapmaker U1TOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | QIDI | Snapmaker |
| Class | COREXY | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Q1 Pro, listed by QIDI as "Q1 Pro 3D Printer". QIDI traded as Qidi Tech until end-2024[1] | Snapmaker U1 3D Printer[2] |
| Release date (announcement and actual shipping) | Not stated on QIDI's own product page; the page now carries a discontinuation notice instead of a launch date (checked Aug 2026)[1][3] | Not documented |
| Street price (USD; dated snapshot per entry) | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00[1][3] | $849.00 against a $999.00 compare-at price on us.snapmaker.com, but the listing is marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Succeeded by the QIDI Q2, which QIDI's own comparison on the Q1 Pro page distinguishes as 270x270x256 mm (vs 245x245x240), 370 °C hotend (vs 350 °C) and 65 °C chamber (vs 60 °C). Do not read Q2 figures onto the Q1 Pro[1][3] | An optional top cover changes what the machine can print: without it PLA/PETG/TPU/PVA/PCTG; with it ABS, ASA, PA, PC and PET are added; with the top cover AND a hardened-steel nozzle, carbon- and glass-fibre grades. A stated material list for the U1 is therefore meaningless without saying which configuration it refers to[2] |
| Market position: superseded? successor announced? | Discontinued and out of production; QIDI states spare parts and support for existing owners remain available. Replaced by the Q2[1][3] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found[1][4] | 270 x 270 x 270 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 477 x 467 x 489 mm machine dimensions (QIDI)[1][4] | 584 x 499 x 730 mm[2] |
| Net weight (kg) | 17 kg net, 20.3 kg gross (QIDI). 3DJake lists the 20.3 kg figure as gross weight[1][4] | 18.2 kg[2] |
| Frame construction & material | Metal CoreXY motion frame with panelled enclosure; QIDI publishes no frame-material breakdown for this model[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with independent chamber heating to 60 °C; QIDI does not publish the panel materials for this model[1][4] | Open as sold; a top cover is an optional accessory that raises the supported material range[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 °C, actively heated (manufacturer claim — this is a heater setpoint, not a measured passive figure)[1][4] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[4] | Four independent toolheads on a changer; Snapmaker quotes a 5-second swap[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | 10 mm linear steel rods with automatically tensioned belt (manufacturer description)[4] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Independent dual Z lead-screw motors[4] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed)[1][4] | 500 mm/s maximum toolhead speed (manufacturer claim)[2] |
| Max acceleration (claimed, mm/s²) | <=20,000 mm/s2 (manufacturer claim)[1][4] | 20,000 mm/s2 maximum (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 32 mm3/s maximum hotend flow (manufacturer claim)[2] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaping with an accelerometer, run as a calibration routine[2] |
| Extrusion Pressure Control | ||
| Pressure advance (Klipper) / linear advance (Marlin) supported? | Not documented | Pressure advance, with automatic flow compensation calibration[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder with hardened steel gears[1][4] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Tri-metal hotend with a ceramic heater plate and a bimetal nozzle, 0.4 mm standard[1][4] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed. No firmware max_temp verified for this model[1][4] | 300 °C maximum (manufacturer claim)[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Stainless steel as standard; hardened steel needed for fibre-filled grades[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed. No firmware limit verified for this model[1][4] | 100 °C maximum (manufacturer claim)[2] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided textured PEI plate on an aluminium substrate bed[1][4] | Flexible steel sheet with a PEI surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; QIDI markets it as "hands-free automatic levelling" with dual sensors, without naming the probe technology[1] | Mesh bed levelling. Automatic toolhead offset calibration is done by coordinate measuring[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted; QIDI also lists filament tangle detection without describing the mechanism[4] | Filament run-out detection, plus air-printing detection and RFID filament recognition[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Four toolheads with auto-feed and a backup mode; toolhead swap error detection, build-plate presence and obstruction detection[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Auxiliary part-cooling fan plus a chamber circulation fan (fan count and duct design not published)[4] | Main plus auxiliary part-cooling fans[2] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[4] | Not documented |
| Total rated power draw | 350 W plus 300 W for chamber heating (rated)[1][4] | Maximum input power 1150 W at 220-240 V, 400 W at 100-120 V; maximum input current 6 A / 4 A respectively[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper, running on a 64-bit processor per QIDI. Exact fork and version not published on the product page[1] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen, 272 x 480[1][4] | 3.5-inch, 320 x 480 touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 6 (QIDI states "150M 2.4G") and USB 2.0. No Ethernet listed for this model[1][4] | Wi-Fi 2.4 GHz (802.11b/g/n) and USB flash drive. No Ethernet listed[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in camera, up to 1080p, timelapse supported. Framerate not published[1][4] | 2 MP built-in chamber camera for live view[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Ships fully assembled[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed as a feature; mechanism not published[4] | Power-loss recovery supported; mechanism not published[2] |
| Materials Support | ||
| Officially supported filament list | QIDI lists compatibility with common filaments; storage 32 GB eMMC. No per-material list published on the current page beyond the general claim[1] | Base: PLA, PETG, TPU, PVA, PCTG. With the optional top cover: adds PET, ABS, ASA, PA, PC. With top cover and a hardened-steel nozzle: adds carbon- and glass-fibre-reinforced polymers[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage, 14-day no-reason return, lifetime tech guidance (QIDI's standard terms as shown on its store)[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Q1 Pro product page (global store) qidi3d.com · 2026-08 · vendor
- Snapmaker U1 product page us.snapmaker.com · 2026-08 · vendor
- QIDI Q1 Pro product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Q1 Pro technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor