3D Printing InfoPrinter comparison
QIDI Q1 Pro vs Snapmaker Artisan
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI Q1 Pro comparisonsMore Snapmaker Artisan comparisons
| Property | QIDI Q1 ProCOREXY | Snapmaker ArtisanIDEX |
|---|---|---|
| Identity | ||
| Brand | QIDI | Snapmaker |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Q1 Pro, listed by QIDI as "Q1 Pro 3D Printer". QIDI traded as Qidi Tech until end-2024[1] | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[2] |
| Release date (announcement and actual shipping) | Not stated on QIDI's own product page; the page now carries a discontinuation notice instead of a launch date (checked Aug 2026)[1][3] | Not documented |
| Street price (USD; dated snapshot per entry) | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00[1][3] | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Succeeded by the QIDI Q2, which QIDI's own comparison on the Q1 Pro page distinguishes as 270x270x256 mm (vs 245x245x240), 370 °C hotend (vs 350 °C) and 65 °C chamber (vs 60 °C). Do not read Q2 figures onto the Q1 Pro[1][3] | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[2] |
| Market position: superseded? successor announced? | Discontinued and out of production; QIDI states spare parts and support for existing owners remain available. Replaced by the Q2[1][3] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found[1][4] | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 477 x 467 x 489 mm machine dimensions (QIDI)[1][4] | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[2] |
| Net weight (kg) | 17 kg net, 20.3 kg gross (QIDI). 3DJake lists the 20.3 kg figure as gross weight[1][4] | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[2] |
| Frame construction & material | Metal CoreXY motion frame with panelled enclosure; QIDI publishes no frame-material breakdown for this model[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with independent chamber heating to 60 °C; QIDI does not publish the panel materials for this model[1][4] | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 °C, actively heated (manufacturer claim — this is a heater setpoint, not a measured passive figure)[1][4] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[4] | IDEX — two independently driven print heads[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | 10 mm linear steel rods with automatically tensioned belt (manufacturer description)[4] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Independent dual Z lead-screw motors[4] | Z-axis lead 8 mm; X and Y leads 40 mm[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed)[1][4] | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[2] |
| Max acceleration (claimed, mm/s²) | <=20,000 mm/s2 (manufacturer claim)[1][4] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder with hardened steel gears[1][4] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Tri-metal hotend with a ceramic heater plate and a bimetal nozzle, 0.4 mm standard[1][4] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed. No firmware max_temp verified for this model[1][4] | 300 °C maximum (manufacturer claim)[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass standard, hardened steel optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed. No firmware limit verified for this model[1][4] | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[2] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided textured PEI plate on an aluminium substrate bed[1][4] | Dual-sided textured PEI sheet[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; QIDI markets it as "hands-free automatic levelling" with dual sensors, without naming the probe technology[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted; QIDI also lists filament tangle detection without describing the mechanism[4] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Auxiliary part-cooling fan plus a chamber circulation fan (fan count and duct design not published)[4] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[4] | Not documented |
| Total rated power draw | 350 W plus 300 W for chamber heating (rated)[1][4] | Integrated controller rated 300 W + 450 W[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper, running on a 64-bit processor per QIDI. Exact fork and version not published on the product page[1] | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen, 272 x 480[1][4] | 7-inch touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 6 (QIDI states "150M 2.4G") and USB 2.0. No Ethernet listed for this model[1][4] | Wi-Fi, USB cable, USB flash drive[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in camera, up to 1080p, timelapse supported. Framerate not published[1][4] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Ships fully assembled[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed as a feature; mechanism not published[4] | Not documented |
| Materials Support | ||
| Officially supported filament list | QIDI lists compatibility with common filaments; storage 32 GB eMMC. No per-material list published on the current page beyond the general claim[1] | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage, 14-day no-reason return, lifetime tech guidance (QIDI's standard terms as shown on its store)[5] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Q1 Pro product page (global store) qidi3d.com · 2026-08 · vendor
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- QIDI Q1 Pro product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Q1 Pro technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor