3D Printing InfoPrinter comparison
QIDI Plus5 vs Rat Rig V-Core 4.1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI Plus5 comparisonsMore Rat Rig V-Core 4.1 comparisons
| Property | QIDI Plus5COREXY | Rat Rig V-Core 4.1COREXY |
|---|---|---|
| Identity | ||
| Brand | QIDI | Rat Rig |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Plus5, sold as "QIDI Plus5 3D Printer"[1][2] | Rat Rig V-Core 4.1, described by Rat Rig as a large-format open CoreXY 3D printer kit[3] |
| Release date (announcement and actual shipping) | Launched 5 August 2026, 09:00 EDT / 15:00 CEST[4] | Not documented |
| Launch MSRP (USD) | $749 regular launch price; a launch-window member discount put it under $700[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $749.00 for the standard model on us.qidi3d.com, checked Aug 2026. Other variants: Polar Cooler bundle $899.00, Plus5 Combo $899.00, Combo + Polar Cooler $1,049.00. No compare-at price listed[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Four purchase variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), and Combo + Polar Cooler. The Polar Cooler is a pre-sale add-on shipping separately, so its specs are not Plus5 specs. Replaces the Plus4 (305x305x280, 450 W + 400 W chamber)[1][4] | Three sizes, all at the same base-kit price. Acceleration is the size-dependent figure and the one most often mis-quoted: 15,000 mm/s2 at 300 mm, 12,000 at 400 mm, 8,000 at 500 mm. IDEX is a configuration option and changes the usable area per toolhead (copy mode 150x150x300 at the 300 size, mirror mode 95x95x300). Base kit excludes electronics. Rat Rig prices the base kit only in EUR (EUR 873.90 on sale from EUR 971.00, Aug 2026); no USD list price is published, so no USD street price is recorded here[3] |
| Market position: superseded? successor announced? | Current flagship of QIDI's large-format line as of Aug 2026; sits below the Max4 (390x390x340)[1][5] | Current revision, replacing the V-Core 4; Rat Rig sells a 4.1 upgrade kit for existing V-Core 4 machines[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 320 x 320 x 300 mm advertised — QIDI states this is about 18% more volume than the Plus4[1][2][4] | 300 x 300 x 300, 400 x 400 x 400 or 500 x 500 x 500 mm. Sortable value is the 300 mm kit[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 500 x 488 x 558 mm[2] | 623.2 x 583 x 785 mm (300); 723.2 x 683 x 885 mm (400); 823.2 x 783 x 985 mm (500). Sortable value is the 300 mm kit[3] |
| Net weight (kg) | 29.0 kg net[2] | Kit weight 35 kg (300), 45 kg (400), 55 kg (500)[3] |
| Frame construction & material | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[1] | 30-series aluminium extrusion; the 4.1 adds a steel X-axis gantry for rigidity[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed, with a 3-stage air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[1][2] | Open frame in the base kit[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C, actively heated, 550 W chamber heater — reported as a 37.5% increase in heater power over the Plus4 (manufacturer claim)[2][4] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[2] | CoreXY; Hybrid CoreXY and IDEX are configuration options[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | High-precision linear rails on X[1][4] | Not documented |
| Belts (type, width, e.g. Gates?) | 1.5GT belts, 9 mm wide — wider than the 2GT 6 mm belts common in this class[1][4] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s (manufacturer claim)[2] | Not documented |
| Max acceleration (claimed, mm/s²) | <=20,000 mm/s2 (manufacturer claim)[2] | Size-dependent: 15,000 mm/s2 at 300 mm, 12,000 at 400 mm, 8,000 at 500 mm (manufacturer claims)[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Resonance compensation listed as a feature; implementation not named on the product page[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened dual gears[2] | Full-metal skeleton toolhead, new in the 4.1[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating-plate hotend with a bimetal nozzle; 0.4 mm standard, 0.2/0.6/0.8 mm optional[2] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=370 °C claimed[1][2] | 350 °C maximum nozzle temperature (manufacturer claim)[3] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm hardened steel and 0.6 mm included[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed, described by QIDI as an even-heating bed[1][2] | 120 °C maximum heatbed temperature (manufacturer claim). The 400 and 500 sizes get 8 mm thick beds in the 4.1[3] |
| Bed surface (material, texture, coating), single/double-sided | Aluminium silicone heated bed with a dual-sided textured PEI plate[2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling using an integrated load cell; QIDI describes it as direct nozzle-contact detection[2][4] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, plus a filament cutter[2] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Improved part cooling, listed by Rat Rig as one of the 4.1 changes[3] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon; QIDI claims 99.5% capture of airborne particles and dust[1][2][4] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100/240 VAC, 50/60 Hz[2] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not stated on the product page. QIDI's slicer ecosystem is QIDI Studio, and Orca/PrusaSlicer are listed as supported[2] | RatOS 2.1 (Rat Rig's Klipper distribution)[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4-inch touchscreen, 480 x 320[2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz / 5 GHz, Ethernet, USB; 32 GB eMMC storage plus USB 2.0 flash drive[2] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | AI camera with failure detection, up to 1080p, timelapse supported (low frame rate)[1][2][4] | Not documented |
| LED chamber/toolhead lighting | RGB status light[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; the 4.1 ships pre-made cables that need no crimping, with rewritten step-by-step build documentation[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed; mechanism not published[2] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PETG, TPU, PA, PC, carbon- and glass-fibre-reinforced polymers[2] | PLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | QIDI store terms: 1-year coverage, lifetime tech guidance, 14-day no-reason return[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus5 technical data table 3djake.com · 2026-08 · vendor
- Rat Rig V-Core 4.1 product page ratrig.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor