3D Printing InfoPrinter comparison
QIDI Plus4 vs Stratasys F370
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI Plus4 comparisonsMore Stratasys F370 comparisons
| Property | QIDI Plus4COREXY | Stratasys F370INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | QIDI | Stratasys |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Plus4, sold as "Plus4 3D Printer". QIDI's own wiki files it under X-Plus4[1][2] | Stratasys F370, part of the Stratasys F123 Series[3] |
| Release date (announcement and actual shipping) | Announced September 2024; QIDI ran launch promotional pricing in the week of 20-27 September 2024 (secondary reporting, not a QIDI press release)[4] | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[3] |
| Street price (USD; dated snapshot per entry) | $649.00 on us.qidi3d.com for the Plus4 + 1 filament variant against a $799.00 compare-at price; $699.00 on qidi3d.com against $799.00. Checked Aug 2026[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two purchasable variants: Plus4 + Filament x1 at $649 and Plus4 Combo + Filament x1 at $799 (Combo adds the QIDI Box multi-material unit). Distinct from the older X-Plus 3 (280x280x270, 350 °C) and from the newer Plus5 (320x320x300)[2][1] | Top of the series and the only one with ABS-ESD7, PC-ABS and Diran 410MF07, an Insight software licence, and ProtectAM with US DoD STIG compliance on Red Hat Enterprise Linux. Cabinet and weight are identical to the F170 and F270, so footprint tells you nothing about which model you have[3] |
| Market position: superseded? successor announced? | Superseded at the top of the large-format line by the Plus5, launched 5 August 2026 with 18% more build volume; Plus4 still listed and in stock Aug 2026[5][6] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 305 x 305 x 280 mm advertised. No independently measured usable envelope found[1][4] | 355 x 254 x 355 mm (14 x 10 x 14 in)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 505 x 487 x 550 mm[4] | 1,626 x 864 x 711 mm (64 x 34 x 28 in)[3] |
| Net weight (kg) | 32 kg gross (3DJake). QIDI does not publish a net weight on the product page[4] | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[3] |
| Frame construction & material | Enclosed CoreXY chassis with double-layer chamber insulation; QIDI does not publish a frame material breakdown[1] | Fully enclosed office/classroom-grade cabinet, factory assembled[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed, double-layer insulated chamber with second-generation active heating to 65 °C[1][4] | Enclosed build chamber[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C, actively heated by a 400 W heater which QIDI says reaches setpoint in about 8 minutes (manufacturer claim)[1][4] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[4] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual independent Z motors on 10 mm linear shafts and screws[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s (manufacturer claim, tool-head maximum)[4] | Not documented |
| Max acceleration (claimed, mm/s²) | <=20,000 mm/s2 (manufacturer claim)[4] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened steel dual gears, 1.75 mm filament[1][4] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Second-generation 80 W bimetal hotend with a multi-metal composite hardened-tip nozzle; 0.4 mm standard, 0.2/0.5/0.8 mm optional[1][4] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=370 °C claimed. No firmware max_temp verified for this model[1][4] | Not documented |
| Heater cartridge power (W) | 80 W hotend heater (manufacturer figure)[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: QIDI's own Plus4 page states a 100 °C bed temperature, 3DJake's spec table states <=120 °C. Not resolved; the lower vendor-published figure is used as the sortable value[1][4] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | 6 mm aluminium-substrate heated bed with a double-sided textured PEI plate[1][4] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Full-auto calibration; QIDI markets "hands-free automatic" levelling and does not name the probe technology on the product page[1][4] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, plus a filament cutter and filament tangle detection (tangle mechanism not described)[4] | Not documented |
| Multi-material/multi-color capability or official upgrade path | QIDI Box multi-material unit supported; sold bundled as the Plus4 Combo[1][2] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Auxiliary part-cooling fan plus a chamber circulation fan; fan sizes and duct design not published[4] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[4] | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[3] |
| Total rated power draw | 450 W plus 400 W for chamber heating (rated)[4] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper v0.12, described by QIDI as open source. Fork details and current release not published on the product page[1] | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[1][4] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz, Ethernet, USB[1][4] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[3] |
| Cloud service & phone app; LAN-only mode possible? | Mobile and computer control, remote cloud or LAN-only operation[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in low-frame-rate camera, up to 1080p, timelapse supported[1][4] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | QIDI claims about 10 minutes from unbox to printing[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed; mechanism not published[4] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PETG, TPU, PA, PC, PA-CF/GF, PET-CF/GF, PPA-CF/GF, PPS-CF and other CF/GF-filled polymers[1][4] | PLA, ABS-ESD7, ABS-M30, ASA, Diran 410MF072, FDM TPU 92A, PC-ABS, ABS-CF10, with QSR soluble support. Diran and PLA use breakaway rather than soluble support[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage, 14-day no-reason return, 30-day price protection[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Plus4 product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Plus4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- QIDI Tech Plus4 technical data table 3djake.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review