3D Printing InfoPrinter comparison
QIDI Plus4 vs QIDI Plus5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
| Property | QIDI Plus4COREXY | QIDI Plus5COREXY |
|---|---|---|
| Identity | ||
| Brand | QIDI | QIDI |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Plus4, sold as "Plus4 3D Printer". QIDI's own wiki files it under X-Plus4[1][2] | QIDI Plus5, sold as "QIDI Plus5 3D Printer"[3][4] |
| Release date (announcement and actual shipping) | Announced September 2024; QIDI ran launch promotional pricing in the week of 20-27 September 2024 (secondary reporting, not a QIDI press release)[5] | Launched 5 August 2026, 09:00 EDT / 15:00 CEST[6] |
| Launch MSRP (USD) | Not documented | $749 regular launch price; a launch-window member discount put it under $700[6] |
| Street price (USD; dated snapshot per entry) | $649.00 on us.qidi3d.com for the Plus4 + 1 filament variant against a $799.00 compare-at price; $699.00 on qidi3d.com against $799.00. Checked Aug 2026[1][2] | $749.00 for the standard model on us.qidi3d.com, checked Aug 2026. Other variants: Polar Cooler bundle $899.00, Plus5 Combo $899.00, Combo + Polar Cooler $1,049.00. No compare-at price listed[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two purchasable variants: Plus4 + Filament x1 at $649 and Plus4 Combo + Filament x1 at $799 (Combo adds the QIDI Box multi-material unit). Distinct from the older X-Plus 3 (280x280x270, 350 °C) and from the newer Plus5 (320x320x300)[2][1] | Four purchase variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), and Combo + Polar Cooler. The Polar Cooler is a pre-sale add-on shipping separately, so its specs are not Plus5 specs. Replaces the Plus4 (305x305x280, 450 W + 400 W chamber)[3][6] |
| Market position: superseded? successor announced? | Superseded at the top of the large-format line by the Plus5, launched 5 August 2026 with 18% more build volume; Plus4 still listed and in stock Aug 2026[3][6] | Current flagship of QIDI's large-format line as of Aug 2026; sits below the Max4 (390x390x340)[3][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 305 x 305 x 280 mm advertised. No independently measured usable envelope found[1][5] | 320 x 320 x 300 mm advertised — QIDI states this is about 18% more volume than the Plus4[3][4][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 505 x 487 x 550 mm[5] | 500 x 488 x 558 mm[4] |
| Net weight (kg) | 32 kg gross (3DJake). QIDI does not publish a net weight on the product page[5] | 29.0 kg net[4] |
| Frame construction & material | Enclosed CoreXY chassis with double-layer chamber insulation; QIDI does not publish a frame material breakdown[1] | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed, double-layer insulated chamber with second-generation active heating to 65 °C[1][5] | Fully enclosed, with a 3-stage air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[3][4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C, actively heated by a 400 W heater which QIDI says reaches setpoint in about 8 minutes (manufacturer claim)[1][5] | 65 °C, actively heated, 550 W chamber heater — reported as a 37.5% increase in heater power over the Plus4 (manufacturer claim)[4][6] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[5] | CoreXY[4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | High-precision linear rails on X[3][6] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual independent Z motors on 10 mm linear shafts and screws[1] | Not documented |
| Belts (type, width, e.g. Gates?) | Not documented | 1.5GT belts, 9 mm wide — wider than the 2GT 6 mm belts common in this class[3][6] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s (manufacturer claim, tool-head maximum)[5] | 600 mm/s (manufacturer claim)[4] |
| Max acceleration (claimed, mm/s²) | <=20,000 mm/s2 (manufacturer claim)[5] | <=20,000 mm/s2 (manufacturer claim)[4] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Resonance compensation listed as a feature; implementation not named on the product page[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened steel dual gears, 1.75 mm filament[1][5] | Direct drive with hardened dual gears[4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Second-generation 80 W bimetal hotend with a multi-metal composite hardened-tip nozzle; 0.4 mm standard, 0.2/0.5/0.8 mm optional[1][5] | Ceramic heating-plate hotend with a bimetal nozzle; 0.4 mm standard, 0.2/0.6/0.8 mm optional[4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=370 °C claimed. No firmware max_temp verified for this model[1][5] | <=370 °C claimed[3][4] |
| Heater cartridge power (W) | 80 W hotend heater (manufacturer figure)[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: QIDI's own Plus4 page states a 100 °C bed temperature, 3DJake's spec table states <=120 °C. Not resolved; the lower vendor-published figure is used as the sortable value[1][5] | <=120 °C claimed, described by QIDI as an even-heating bed[3][4] |
| Bed surface (material, texture, coating), single/double-sided | 6 mm aluminium-substrate heated bed with a double-sided textured PEI plate[1][5] | Aluminium silicone heated bed with a dual-sided textured PEI plate[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Full-auto calibration; QIDI markets "hands-free automatic" levelling and does not name the probe technology on the product page[1][5] | Automatic levelling using an integrated load cell; QIDI describes it as direct nozzle-contact detection[4][6] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, plus a filament cutter and filament tangle detection (tangle mechanism not described)[5] | Filament run-out sensor, plus a filament cutter[4] |
| Multi-material/multi-color capability or official upgrade path | QIDI Box multi-material unit supported; sold bundled as the Plus4 Combo[1][2] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Auxiliary part-cooling fan plus a chamber circulation fan; fan sizes and duct design not published[5] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon; QIDI claims 99.5% capture of airborne particles and dust[3][4][6] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[5] | 100/240 VAC, 50/60 Hz[4] |
| Total rated power draw | 450 W plus 400 W for chamber heating (rated)[5] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper v0.12, described by QIDI as open source. Fork details and current release not published on the product page[1] | Not stated on the product page. QIDI's slicer ecosystem is QIDI Studio, and Orca/PrusaSlicer are listed as supported[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[1][5] | 4-inch touchscreen, 480 x 320[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz, Ethernet, USB[1][5] | Wi-Fi 2.4 GHz / 5 GHz, Ethernet, USB; 32 GB eMMC storage plus USB 2.0 flash drive[4] |
| Cloud service & phone app; LAN-only mode possible? | Mobile and computer control, remote cloud or LAN-only operation[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in low-frame-rate camera, up to 1080p, timelapse supported[1][5] | AI camera with failure detection, up to 1080p, timelapse supported (low frame rate)[3][4][6] |
| LED chamber/toolhead lighting | Not documented | RGB status light[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | QIDI claims about 10 minutes from unbox to printing[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed; mechanism not published[5] | Power-loss recovery listed; mechanism not published[4] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PETG, TPU, PA, PC, PA-CF/GF, PET-CF/GF, PPA-CF/GF, PPS-CF and other CF/GF-filled polymers[1][5] | PLA, ABS, ASA, PETG, TPU, PA, PC, carbon- and glass-fibre-reinforced polymers[4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage, 14-day no-reason return, 30-day price protection[1] | QIDI store terms: 1-year coverage, lifetime tech guidance, 14-day no-reason return[7] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Plus4 product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Plus4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus5 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech Plus4 technical data table 3djake.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor