3D Printing InfoPrinter comparison
QIDI Max4 vs UniFormation GKtwo
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI Max4 comparisonsMore UniFormation GKtwo comparisons
| Property | QIDI Max4COREXY | UniFormation GKtwoRESIN |
|---|---|---|
| Identity | ||
| Brand | QIDI | UniFormation |
| Class | COREXY | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Max4, sold as "Max4 High-Temp 3D Printer"[1][2] | UniFormation GKtwo 10.3" 8K Resin Printer[3][4] |
| Release date (announcement and actual shipping) | Not published on QIDI's product page; the machine is listed as the current replacement for the discontinued X-Max 3 (checked Aug 2026)[1][5] | Not documented |
| Street price (USD; dated snapshot per entry) | $1,099.00 standard on us.qidi3d.com against a $1,149.00 compare-at price, checked Aug 2026. Variants: Polar Cooler bundle $1,249.00 (was $1,348.00), Max4 Combo $1,249.00 (was $1,299.00), Combo + Polar Cooler $1,399.00[1] | $749.99 on uniformation3d.com but marked Sold out, checked Aug 2026 (the page shows a compare-at price of $0.00, i.e. none set)[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Four variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), Combo + Polar Cooler. Direct replacement for the X-Max 3, which it differs from on every headline figure: 390x390x340 vs 325x325x315, 800 vs 600 mm/s, 370 vs 350 °C. Do not carry X-Max 3 specs across[1][5] | UniFormation lists GKtwo variants by region and bundle (GKtwo ALL, GKtwo ALL UK) rather than by hardware, so the hardware specification is common; what changes is what ships in the box. Not to be confused with the earlier GKone[3] |
| Market position: superseded? successor announced? | Current large-format flagship as of Aug 2026; QIDI's X-Max 3 page directs buyers here[1][5] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 390 x 390 x 340 mm advertised[1][2] | 228 x 128 x 245 mm[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 558 x 578 x 612 mm[2] | 350 x 315 x 455 mm[3][4] |
| Net weight (kg) | 46.5 kg net[2] | 20 kg packaged (UniFormation publishes package weight, not net weight)[3][4] |
| Frame construction & material | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a 3-in-1 air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[2] | Open-frame MSLA with a UV-blocking cover[3][4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C, independent active chamber heating (manufacturer claim), with a 4-pin PWM chamber fan with RPM feedback[2] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[2] | MSLA — photocuring LCD, single Z axis, straight-lift peel[3][4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | 2 mm lead Z screw with an anti-backlash nut[1] | Not documented |
| Stepper motors (frame size, step angle, brand if known) | FOC closed-loop stepper motors[2] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 800 mm/s (manufacturer claim, maximum)[2] | Not documented |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 (manufacturer claim, maximum)[2] | Not documented |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s rated flow (manufacturer claim)[2] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Input shaper listed as a feature[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, dual hardened-steel gears, 8.9:1 reduction[2] | Not documented |
| Gear ratio & drive gear material | 8.9:1; drive gears hardened steel[2] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Multi-metal hotend with a ceramic heater and a 0.4 mm bimetal nozzle; ceramic throat[2] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=370 °C claimed[1][2] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed on a 390 x 390 mm bed QIDI markets as ultra-uniform (no thermal imaging published)[1][2] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Aluminium plate with silicone heater; double-sided magnetic PEI build plate[2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; probe technology not named by QIDI[2] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor and filament tangle detection (tangle mechanism not described), plus a filament cutter[2] | Not documented |
| Multi-material/multi-color capability or official upgrade path | QIDI Box multi-colour unit supported; sold bundled as the Max4 Combo[1][2] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Toolhead, model and auxiliary fans are all 4-pin PWM with RPM feedback; mainboard and chamber fans are closed-loop, chamber fan high-power turbo[2] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon[2] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 110 V / 220-240 V AC, 50/60 Hz[2] | 110/220 V[3][4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not stated on the product page; QIDI Studio, PrusaSlicer and Orca are the supported slicers[2] | Not named. Slicers: CHITUBOX, the GKtwo slicer, and Lychee. File format STL[3][4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 480 x 800[2] | 5-inch touchscreen (control panel — not the masking LCD, see W1)[3][4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, LAN, USB[2] | USB file transfer[3][4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | AI camera with print-failure detection[1][2] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed; mechanism not published[2] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PETG, TPU, PA, PC, and glass- and carbon-fibre-filled polymers[2] | 402.5-405 nm photopolymer resin. No closed compatibility list published[3][4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage, lifetime tech guidance, 14-day no-reason return[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Printing tolerance +/-0.1 mm for lengths up to 100 mm, +/-0.1% beyond — a manufacturer specification, not an independent measurement[3] |
| Resin & MSLA | ||
| Masking LCD | Not documented | 10.3-inch masking LCD, 7680 x 4320 px (8K), XY pixel pitch 29.6 um (manufacturer specification)[3][4] |
| Light source | Not documented | Photocuring LCD light engine at 402.5-405 nm. UniFormation does not publish the LED count or optical design on this page[3][4] |
| Layer exposure times | Not documented | 2-3 s per layer at 0.05 mm layer height (manufacturer figure — one of the few makers here that states the layer height its exposure figure assumes). Sortable value is the midpoint[3][4] |
| Layer height range | Not documented | 0.03, 0.05 and 0.1 mm (three discrete settings, not a continuous range)[3][4] |
| Resin vat & feeding | Not documented | Resin vat capacity 0.7 kg, with built-in resin heating: UniFormation quotes warming to 95 F (35 C) in 8 minutes from 50 F. No auto-refill and no level sensing published[3][4] |
| Fume extraction | Not documented | Built-in odour filter[3][4] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Max4 technical data table 3djake.com · 2026-08 · vendor
- UniFormation GKtwo 10.3" 8K resin printer product page uniformation3d.com · 2026-08 · vendor
- UniFormation GKtwo technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor