3D Printing InfoPrinter comparison
QIDI Max4 vs UltiMaker Factor 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI Max4 comparisonsMore UltiMaker Factor 4 comparisons
| Property | QIDI Max4COREXY | UltiMaker Factor 4INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | QIDI | UltiMaker |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Max4, sold as "Max4 High-Temp 3D Printer"[1][2] | UltiMaker Factor 4[3] |
| Release date (announcement and actual shipping) | Not published on QIDI's product page; the machine is listed as the current replacement for the discontinued X-Max 3 (checked Aug 2026)[1][4] | Announced 22 April 2024, shown at HANNOVER MESSE 2024 (22-26 April) and TCT Asia (7-9 May 2024)[3] |
| Launch MSRP (USD) | Not documented | Starting at approximately $20,000[3] |
| Street price (USD; dated snapshot per entry) | $1,099.00 standard on us.qidi3d.com against a $1,149.00 compare-at price, checked Aug 2026. Variants: Polar Cooler bundle $1,249.00 (was $1,348.00), Max4 Combo $1,249.00 (was $1,299.00), Combo + Polar Cooler $1,399.00[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Four variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), Combo + Polar Cooler. Direct replacement for the X-Max 3, which it differs from on every headline figure: 390x390x340 vs 325x325x315, 800 vs 600 mm/s, 370 vs 350 °C. Do not carry X-Max 3 specs across[1][4] | Shares the 330 x 240 x 300 mm envelope with the UltiMaker S5, S7 and S8, which is the single most contaminated figure in UltiMaker's range. What separates the Factor 4 is the actively controlled 70 °C build volume, the climate-controlled 6-spool material station holding humidity below 15%, and HEPA filtration. UltiMaker also sells a Factor 4 Plus[3] |
| Market position: superseded? successor announced? | Current large-format flagship as of Aug 2026; QIDI's X-Max 3 page directs buyers here[1][4] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 390 x 390 x 340 mm advertised[1][2] | 330 x 240 x 300 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 558 x 578 x 612 mm[2] | Not documented |
| Net weight (kg) | 46.5 kg net[2] | Not documented |
| Frame construction & material | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a 3-in-1 air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[2] | Enclosed with actively controlled chamber airflow and a HEPA filter[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C, independent active chamber heating (manufacturer claim), with a 4-pin PWM chamber fan with RPM feedback[2] | Build volume temperature controlled up to 70 °C with actively controlled chamber airflow (manufacturer specification)[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[2] | Direct-drive dual extrusion; kinematic layout not stated in the source checked[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | 2 mm lead Z screw with an anti-backlash nut[1] | Not documented |
| Stepper motors (frame size, step angle, brand if known) | FOC closed-loop stepper motors[2] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 800 mm/s (manufacturer claim, maximum)[2] | Not documented |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 (manufacturer claim, maximum)[2] | Not documented |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s rated flow (manufacturer claim)[2] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Input shaper listed as a feature[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, dual hardened-steel gears, 8.9:1 reduction[2] | Direct-drive dual extrusion[3] |
| Gear ratio & drive gear material | 8.9:1; drive gears hardened steel[2] | Not documented |
| Filament diameter | Not documented | 2.85 mm[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Multi-metal hotend with a ceramic heater and a 0.4 mm bimetal nozzle; ceramic throat[2] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=370 °C claimed[1][2] | 340 °C maximum with the high-temperature print core (manufacturer claim)[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed on a 390 x 390 mm bed QIDI markets as ultra-uniform (no thermal imaging published)[1][2] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Aluminium plate with silicone heater; double-sided magnetic PEI build plate[2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; probe technology not named by QIDI[2] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor and filament tangle detection (tangle mechanism not described), plus a filament cutter[2] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Automatic climate-controlled material handling and storage station holding humidity below 15%, storing up to six spools[3] |
| Multi-material/multi-color capability or official upgrade path | QIDI Box multi-colour unit supported; sold bundled as the Max4 Combo[1][2] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Toolhead, model and auxiliary fans are all 4-pin PWM with RPM feedback; mainboard and chamber fans are closed-loop, chamber fan high-power turbo[2] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon[2] | HEPA filter[3] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 110 V / 220-240 V AC, 50/60 Hz[2] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not stated on the product page; QIDI Studio, PrusaSlicer and Orca are the supported slicers[2] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 480 x 800[2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, LAN, USB[2] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | AI camera with print-failure detection[1][2] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed; mechanism not published[2] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PETG, TPU, PA, PC, and glass- and carbon-fibre-filled polymers[2] | UltiMaker-branded PPS CF, PLA, Tough PLA, Nylon, PETG, PET CF and PVA, plus validated third-party materials from BASF Forward AM, Kimya, Polymaker, LEHVOSS and Jabil[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage, lifetime tech guidance, 14-day no-reason return[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy within +/-0.2 mm or +/-0.2% of feature nominal length; UltiMaker states it tested over 95% print-completion success. Manufacturer figures, not independent measurements[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Max4 technical data table 3djake.com · 2026-08 · vendor
- UltiMaker Factor 4: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor