3D Printing InfoPrinter comparison
Original Prusa MK4S vs Rat Rig V-Core 4.1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Original Prusa MK4S comparisonsMore Rat Rig V-Core 4.1 comparisons
| Property | Original Prusa MK4SBEDSLINGER | Rat Rig V-Core 4.1COREXY |
|---|---|---|
| Identity | ||
| Brand | Prusa Research | Rat Rig |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Original Prusa MK4S (Prusa Research, Prague). Sold as "Original Prusa MK4S 3D Printer" and "Original Prusa MK4S 3D Printer kit"[1][2] | Rat Rig V-Core 4.1, described by Rat Rig as a large-format open CoreXY 3D printer kit[3] |
| Release date (announcement and actual shipping) | Announced and available to order on 12 August 2024, the date of Prusa's launch blog post, with assembled printers, kits and an MK4S/MMU3 bundle in stock at announcement[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $925.00 assembled, $657.40 as a kit, on prusa3d.com, Aug 2026. Bundles: $1,171.11 with MMU3, $1,185.65 with the Enclosure, $1,438.33 with both[2][1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The MK4S is a revision of the MK4, not a new platform: Prusa sold a $99 upgrade kit that gives an MK4 all of the MK4S features (360-degree turbine part cooling, high-flow CHT nozzle, firmware and profile changes). Watch the published nozzle ceiling: Prusa's MK4 announcement table says 300 C, while the MK4S product page says 290 C. Related family members are the MK3.5 and MK3.9 upgrades of the MK3S+, which are not the same machine. With the MMU3 the standard (non-high-flow) nozzle is the recommended one[4][5][1] | Three sizes, all at the same base-kit price. Acceleration is the size-dependent figure and the one most often mis-quoted: 15,000 mm/s2 at 300 mm, 12,000 at 400 mm, 8,000 at 500 mm. IDEX is a configuration option and changes the usable area per toolhead (copy mode 150x150x300 at the 300 size, mirror mode 95x95x300). Base kit excludes electronics. Rat Rig prices the base kit only in EUR (EUR 873.90 on sale from EUR 971.00, Aug 2026); no USD list price is published, so no USD street price is recorded here[3] |
| Market position: superseded? successor announced? | Still sold in Aug 2026 as the entry point to the Nextruder line, positioned below the enclosed CORE One+ (Gen 2). Prusa also sells an MK4S-to-CORE One+ (Gen 2) conversion kit[2][1] | Current revision, replacing the V-Core 4; Rat Rig sells a 4.1 upgrade kit for existing V-Core 4 machines[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 210 x 220 mm (manufacturer figure)[1] | 300 x 300 x 300, 400 x 400 x 400 or 500 x 500 x 500 mm. Sortable value is the 300 mm kit[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 500 x 550 x 400 mm (X x Y x Z), stated without the spool holder[1] | 623.2 x 583 x 785 mm (300); 723.2 x 683 x 885 mm (400); 823.2 x 783 x 985 mm (500). Sortable value is the 300 mm kit[3] |
| Net weight (kg) | 7 kg (without spool)[1] | Kit weight 35 kg (300), 45 kg (400), 55 kg (500)[3] |
| Frame construction & material | Aluminium extrusions and frame. Prusa's MK4 announcement records that the cut-aluminium frame of the MK3S+ was replaced by a die-cast aluminium frame for the MK4 platform, which the MK4S inherits[1][5] | 30-series aluminium extrusion; the 4.1 adds a steel X-axis gantry for rigidity[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame. The Original Prusa Enclosure is a separate add-on and raises the achievable chamber temperature to 45 C; there is no active chamber heating[1] | Open frame in the base kit[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger - Prusa's own comparison table gives "Cartesian" for the MK4S against "CoreXY" for the CORE One and CORE One L[6] | CoreXY; Hybrid CoreXY and IDEX are configuration options[3] |
| Stepper motors (frame size, step angle, brand if known) | 0.9 degree X and Y stepper motors, which Prusa states are used to prevent vertical fine artefacts[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic 2130. The MK4 announcement is more specific: TMC2130-LA drivers on the xBuddy board[1][5] | Not documented |
| Speed & Acceleration | ||
| Max acceleration (claimed, mm/s²) | Not documented | Size-dependent: 15,000 mm/s2 at 300 mm, 12,000 at 400 mm, 8,000 at 500 mm (manufacturer claims)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Nextruder, direct drive, E3D V6 compatible with an adapter; Nextruder planetary gear system with a 10:1 gearbox ratio; aluminium heatsink and all-metal filament path[1] | Full-metal skeleton toolhead, new in the 4.1[3] |
| Gear ratio & drive gear material | 10:1 planetary gearbox in the Nextruder[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-swap Prusa nozzle system with an all-metal filament path; the MK4S ships with the high-flow Prusa brass CHT 0.4 mm nozzle. Standard (non-CHT) Prusa nozzles remain usable and are the recommended choice with the MMU3[1][4] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 C claimed max nozzle temperature on the MK4S product page (Prusa's MK4 announcement table gave 300 C for the MK4)[1][5] | 350 °C maximum nozzle temperature (manufacturer claim)[3] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm hardened steel and 0.6 mm included[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature (manufacturer figure)[1] | 120 °C maximum heatbed temperature (manufacturer claim). The 400 and 500 sizes get 8 mm thick beds in the 4.1[3] |
| Bed surface (material, texture, coating), single/double-sided | Magnetic heatbed with removable double-sided PEI spring-steel sheets; smooth PEI sheet supplied[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Load-cell sensor in the toolhead - the nozzle itself is the probe. First-layer calibration and mesh bed levelling over the print area only are fully automatic, with no Live Adjust Z step[1][5] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament sensor fitted as standard; on the MK4 platform this is a built-in Hall sensor that also drives automatic filament loading[1][5] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | High-performance turbine part-cooling fan with a 360-degree air-delivery duct - the headline change from the MK4, derived from work on Prusa's HT90 industrial machine. Fan RPM is monitored in firmware[1][4] | Improved part cooling, listed by Rat Rig as one of the 4.1 changes[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Custom 32-bit xBuddy board with an STM32 MCU, designed, manufactured and tested in-house, plus a custom extruder breakout board for fans and thermistors[1][5] | Not documented |
| PSU (brand, wattage, rail voltage) | 240 W PSU custom-made by Delta with hardware power-panic support[1] | Not documented |
| Total rated power draw | Power consumption 80 W on PLA settings, 120 W on ABS settings (manufacturer figures)[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[7][1] | RatOS 2.1 (Rat Rig's Klipper distribution)[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch 65k-colour graphic screen with touch control[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | On-device colour UI with G-code preview and one-click printing; remote control and firmware updates through Prusa Connect and the Prusa mobile app[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Ethernet, Wi-Fi via the ESP module delivered with the printer, USB drive for print files, plus an NFC receiver used to hand over Wi-Fi credentials from the phone app[1][6][4] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Sold both assembled (plug-and-print after a 10-minute self-test) and as an assembly kit[4] | Self-assembly kit; the 4.1 ships pre-made cables that need no crimping, with rewritten step-by-step build documentation[3] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB; ABS, ASA, HIPS and PA only when using the Original Prusa Enclosure with the filtration add-on[1] | PLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF[3] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | The xBuddy platform carries hardware overcurrent protection that disconnects heater and heatbed power when total current exceeds 15 A, and the firmware is open-source and auditable. Prusa also shipped Thermal Model protection to the earlier MK3 line[5][7] | Not documented |
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Prusa states the MK4S is the first consumer 3D printer to receive UL GREENGUARD certification[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[8][1] | Not documented |
| Spare parts availability & pricing (nozzle, hotend, plate, board, belts) | Prusa cites a perfect 30/30 print-quality score from TechRadar and a CNET "Best Printer for Quality" title; these are quoted on Prusa's own page and were not verified against the original reviews here[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Rat Rig V-Core 4.1 product page ratrig.com · 2026-08 · vendor
- Prusa blog - The Original Prusa MK4S is Here! (published 12 August 2024) blog.prusa3d.com · 2026-08 · doc
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc