3D Printing InfoPrinter comparison
Original Prusa MK4 vs QIDI Max4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Original Prusa MK4 comparisonsMore QIDI Max4 comparisons
| Property | Original Prusa MK4BEDSLINGER | QIDI Max4COREXY |
|---|---|---|
| Identity | ||
| Brand | Prusa Research | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Original Prusa MK4[1] | QIDI Max4, sold as "Max4 High-Temp 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Announced 29 March 2023 with assembled printers shipping immediately from stock; kits opened for ordering about two weeks later[1] | Not published on QIDI's product page; the machine is listed as the current replacement for the discontinued X-Max 3 (checked Aug 2026)[2][4] |
| Launch MSRP (USD) | 1099 USD assembled, 799 USD as a kit, VAT included, at launch[1] | Not documented |
| Street price (USD; dated snapshot per entry) | Not documented | $1,099.00 standard on us.qidi3d.com against a $1,149.00 compare-at price, checked Aug 2026. Variants: Polar Cooler bundle $1,249.00 (was $1,348.00), Max4 Combo $1,249.00 (was $1,299.00), Combo + Polar Cooler $1,399.00[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Superseded by the MK4S, which is the same machine plus a 360-degree turbine part-cooling fan, a high-flow CHT nozzle and firmware/profile work; Prusa sold a 99 USD MK4-to-MK4S upgrade kit and automatically converted unshipped MK4 orders to the S version. The MK3.5 and MK3.9 upgrades convert an MK3S+ to part of the MK4 electronics stack but are not an MK4[5][1] | Four variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), Combo + Polar Cooler. Direct replacement for the X-Max 3, which it differs from on every headline figure: 390x390x340 vs 325x325x315, 800 vs 600 mm/s, 370 vs 350 °C. Do not carry X-Max 3 specs across[2][4] |
| Market position: superseded? successor announced? | Discontinued. No MK4 appears in Prusa's Aug 2026 3D-printer listing, and the MK4 product-page slugs redirect to the MK4S page, so no live first-party price could be recorded[6][5] | Current large-format flagship as of Aug 2026; QIDI's X-Max 3 page directs buyers here[2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 210 x 220 mm (manufacturer figure)[1] | 390 x 390 x 340 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 558 x 578 x 612 mm[3] |
| Net weight (kg) | Not documented | 46.5 kg net[3] |
| Frame construction & material | Die-cast aluminium frame - Prusa replaced the MK3S+'s cut-aluminium frame for the MK4, keeping only the Y-axis profiles, some bearings, the heatbed and the power supply[1] | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame; the Original Prusa Enclosure is an optional add-on[1] | Fully enclosed with a 3-in-1 air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent active chamber heating (manufacturer claim), with a 4-pin PWM chamber fan with RPM feedback[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger of the Prusa i3 family - Prusa's MK4 announcement records that the MK3S+ Y-axis profiles and heatbed were carried over[1] | CoreXY[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | 2 mm lead Z screw with an anti-backlash nut[2] |
| Stepper motors (frame size, step angle, brand if known) | 400-step (0.9 degree) stepper motors, stated by Prusa to prevent vertical fine artefacts[1] | FOC closed-loop stepper motors[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic TMC2130-LA silent stepper drivers on the xBuddy board[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 800 mm/s (manufacturer claim, maximum)[3] |
| Max acceleration (claimed, mm/s²) | Not documented | 30,000 mm/s2 (manufacturer claim, maximum)[3] |
| Max volumetric flow claimed (mm³/s) | Not documented | 40 mm3/s rated flow (manufacturer claim)[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaper listed as a feature[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Nextruder direct drive with a planetary gear system, 1:10 gearbox ratio; aluminium heatsink, all-metal hotend, no PTFE tube in the filament path[1] | Direct drive, dual hardened-steel gears, 8.9:1 reduction[3] |
| Gear ratio & drive gear material | 1:10 planetary gearbox[1] | 8.9:1; drive gears hardened steel[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-swap nozzle system, 0.4 mm default, other diameters supported[1] | Multi-metal hotend with a ceramic heater and a 0.4 mm bimetal nozzle; ceramic throat[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hotend temperature in Prusa's MK4 announcement table - note the MK4S product page publishes 290 C for the same hotend family[1][7] | <=370 °C claimed[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | <=120 °C claimed on a 390 x 390 mm bed QIDI markets as ultra-uniform (no thermal imaging published)[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Magnetic heatbed with removable PEI spring-steel sheets; compatible with the MK3 sheets (smooth PEI, satin, textured PEI, PA nylon)[1] | Aluminium plate with silicone heater; double-sided magnetic PEI build plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Load-cell sensor: fully automatic first-layer calibration with the nozzle as the probe, plus automatic mesh bed levelling over the print area[1] | Automatic levelling; probe technology not named by QIDI[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Built-in Hall-effect filament sensor supporting automatic filament loading[1] | Filament run-out sensor and filament tangle detection (tangle mechanism not described), plus a filament cutter[3] |
| Multi-material/multi-color capability or official upgrade path | Not documented | QIDI Box multi-colour unit supported; sold bundled as the Max4 Combo[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Toolhead, model and auxiliary fans are all 4-pin PWM with RPM feedback; mainboard and chamber fans are closed-loop, chamber fan high-power turbo[3] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Custom 32-bit xBuddy board with STM32, designed and built in-house, with a separate extruder breakout board[1] | Not documented |
| PSU (brand, wattage, rail voltage) | 240 W Delta PSU with hardware power panic[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 110 V / 220-240 V AC, 50/60 Hz[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[8][7] | Not stated on the product page; QIDI Studio, PrusaSlicer and Orca are the supported slicers[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch 65k-colour graphic screen[1] | 5-inch touchscreen, 480 x 800[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | On-device colour UI with one-click printing and status LEDs; Prusa Link is integrated and Prusa Connect adds remote printing[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Ethernet built in, optional ESP Wi-Fi module delivered with the printer, USB drive; print files can also arrive over LAN or the internet via Prusa Connect[1] | Wi-Fi, LAN, USB[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | AI camera with print-failure detection[2][3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[3] |
| Materials Support | ||
| Officially supported filament list | Prusa's launch table says "any thermoplastic including Nylon and Polycarbonate"; the enclosure is still needed in practice for ABS/ASA-class materials[1] | PLA, ABS, ASA, PETG, TPU, PA, PC, and glass- and carbon-fibre-filled polymers[3] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | xBuddy hardware overcurrent protection disconnects heater and heatbed power when total current exceeds 15 A; firmware is open-source and auditable[1][8] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[9][7] | 1-year coverage, lifetime tech guidance, 14-day no-reason return[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Max4 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Prusa blog - The Original Prusa MK4S is Here! (published 12 August 2024) blog.prusa3d.com · 2026-08 · doc
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc