3D Printing InfoPrinter comparison
INTAMSYS FUNMAT PRO 610 HT vs Sovol SV08 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT PRO 610 HT comparisonsMore Sovol SV08 Max comparisons
| Property | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL | Sovol SV08 MaxCOREXY |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | Sovol |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[1] | Sovol SV08 Max 3D Printer[2][3] |
| Street price (USD; dated snapshot per entry) | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[1] | $1,099.00 on sovol3d.com against a $1,299.00 compare-at price (15% off), in stock, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[1][4] | Much larger sibling of the SV08. Differences that matter in a spec box: 500x500x500 vs 350x350x345, 50 vs 30 mm3/s, TMC5160 XY drivers vs TMC2209, CAN bus, HDMI output, dual 0.4 mm nozzles in the box, and a separately sold chamber-heating module. A chamber heating module for the SV08 Max is listed at $69[2][5][6][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 610 x 508 x 508 mm (24 x 20 x 20 in)[1] | 500 x 500 x 500 mm advertised[2][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1710 x 1425 x 2350 mm including the warning lights[1] | 700 x 710 x 750 mm excluding the spool holder. Shipping cartons: 810 x 820 x 360 mm plus a 775 x 728 x 155 mm enclosure-kit box[2][5] |
| Net weight (kg) | 1450 kg[1] | Not documented |
| Frame construction & material | Servo control system on high-precision ball screws; liquid cooling plus fans[1] | Aluminium-extrusion CoreXY frame supplied as a kit; Sovol ships it in two cartons, one of which is an enclosure kit[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[1] | Enclosure kit shipped with the machine (separate carton). A chamber-heating module is sold separately at $69[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Servo-driven ball-screw motion system; two nozzles[1] | CoreXY[2][5] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Z axis 4 x TMC2209; A axis 1 x TMC5160; B axis 1 x TMC5160. Toolhead communication over CAN bus[2][5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[1] | 700 mm/s maximum (manufacturer claim)[2][5] |
| Max acceleration (claimed, mm/s²) | Not documented | 40,000 mm/s2 maximum (manufacturer claim)[2][5] |
| Max volumetric flow claimed (mm³/s) | Not documented | 50 mm3/s maximum (manufacturer claim)[2][5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two nozzles, 1.75 mm filament[1] | Direct drive with auxiliary (assisted) filament feeding[2][5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heater. Two 0.4 mm nozzles supplied as standard; 0.4/0.6/0.8 mm optional[2][5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | <=300 °C claimed[2][5] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Up to 300 °C heated build plate[1] | <=100 °C claimed[2][5] |
| Bed surface (material, texture, coating), single/double-sided | Flexible build plates with a vacuum adsorption system[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling; probe technology not named[1] | Not stated on the SV08 Max page; the SV08 family uses an inductive sensor plus pressure sensor[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament runout detection plus filament tangle/clog detection. Sovol does not describe the tangle or clog mechanism[2][5] |
| Spool holder location & max spool size; drybox compatibility | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[2][5] |
| Input voltage (110/220 V, switch or auto) | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[1] | Not documented |
| Total rated power draw | 15 kW maximum[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; slicing is INTAMSUITE (Windows only)[1] | Klipper (3DJake's table renders it as "Clipper"). OrcaSlicer is the supported slicer[2][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 10-inch touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1] | USB, Wi-Fi 2.4 GHz and 5 GHz, HDMI, Ethernet[2][5] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss resume printing supported; mechanism not published[2][5] |
| Materials Support | ||
| Officially supported filament list | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[1] | 1.75 mm filament; Sovol does not publish a per-material list on this page[2][5] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, FCC, SGS; safety design to EN60204[1] | Not documented |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Sovol SV08 Max technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor