3D Printing InfoPrinter comparison
INTAMSYS FUNMAT PRO 610 HT vs Sovol SV07
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT PRO 610 HT comparisonsMore Sovol SV07 comparisons
| Property | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL | Sovol SV07BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | Sovol |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[1] | Sovol SV07[2][3] |
| Street price (USD; dated snapshot per entry) | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[1] | $299 at 3D Printers Online Store but Out of Stock, checked Aug 2026. Sovol's own comparison article quotes $259. No in-stock listing found[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[1][5] | Base of a two-model pair with the SV07 Plus (300x300x350, 600 W MeanWell PSU, 25-point levelling, adds USB Type-C). The SV07 has a 350 W MeanWell PSU. Both are quoted by Sovol at 500 mm/s and 300 °C, so PSU wattage and build volume are the reliable discriminators[4][3][6] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; not present in the current 3D-printer collection. 3DJake shows it sold out and no longer stocked[7][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 610 x 508 x 508 mm (24 x 20 x 20 in)[1] | 220 x 220 x 250 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1710 x 1425 x 2350 mm including the warning lights[1] | 460 x 457 x 625 mm[3] |
| Net weight (kg) | 1450 kg[1] | 9.8 kg machine weight; 12.9 kg boxed[3] |
| Frame construction & material | Servo control system on high-precision ball screws; liquid cooling plus fans[1] | Open frame, supplied as an assembly kit[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[1] | Open frame; 3DJake records "Heated chamber: No"[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Servo-driven ball-screw motion system; two nozzles[1] | Cartesian i3 bedslinger[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[1] | Conflicting manufacturer figures: Sovol's own comparison says up to 500 mm/s, 3DJake's feature text says up to 250 mm/s, and the retailer listing gives a 250-500 mm/s range. 500 is the headline claim, 250 the working figure[4][2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two nozzles, 1.75 mm filament[1] | All-metal dual-gear direct drive with a planetary gearbox[2][4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal hotend to 300 °C[2][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | <=300 °C claimed[2][3][4] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Up to 300 °C heated build plate[1] | <=100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | Flexible build plates with a vacuum adsorption system[1] | Reversible PEI build plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling; probe technology not named[1] | Automatic bed levelling over 25 points; probe technology not stated[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[2] |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Triple-fan cooling (Sovol's description; fan sizes and duct design not published)[2][4] |
| Electronics & Power | ||
| PSU (brand, wattage, rail voltage) | Not documented | 350 W MeanWell, 24 V, 115/230 V AC input[4][3] |
| Input voltage (110/220 V, switch or auto) | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[1] | Not documented |
| Total rated power draw | 15 kW maximum[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; slicing is INTAMSUITE (Windows only)[1] | Klipper[2][4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 10-inch touchscreen[1] | 5-inch touchscreen (Sovol markets it as a "5-inch HD Klipper screen")[2][4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1] | Wi-Fi and USB Type-C[2][4][3] |
| Materials Support | ||
| Officially supported filament list | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[1] | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[3][4] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, FCC, SGS; safety design to EN60204[1] | Not documented |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Sovol SV07 technical data table 3djake.com · 2026-08 · vendor
- Sovol SV07 Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor