3D Printing InfoPrinter comparison
INTAMSYS FUNMAT PRO 610 HT vs QIDI X-Smart 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT PRO 610 HT comparisonsMore QIDI X-Smart 3 comparisons
| Property | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL | QIDI X-Smart 3COREXY |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | QIDI |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[1] | QIDI X-Smart 3, listed in QIDI navigation as X-Smart3[2][3] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI on the pages checked (Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[1] | $399 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[1][4] | Entry model of the 3-series. Unlike the X-Plus 3 and X-Max 3 it has no heated chamber, a 300 °C rather than 350 °C hotend, a brass rather than copper-alloy/hardened-steel nozzle head, and no Ethernet. It shares the Cortex-A53 board with them, so control-board specs must not be read as shared print specs[2][5][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 610 x 508 x 508 mm (24 x 20 x 20 in)[1] | 175 x 180 x 170 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1710 x 1425 x 2350 mm including the warning lights[1] | 370 x 362 x 397 mm[2] |
| Net weight (kg) | 1450 kg[1] | 10.5 kg[2] |
| Frame construction & material | Servo control system on high-precision ball screws; liquid cooling plus fans[1] | QIDI publishes no frame-material breakdown for this model[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[1] | No heated chamber. 3DJake's table records "Heated chamber: No"; QIDI does not describe an enclosure for this model[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Servo-driven ball-screw motion system; two nozzles[1] | CoreXY[2][3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[1] | <=500 mm/s (manufacturer claim)[2][3] |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | Not documented | 30 mm3/s extruder flow (manufacturer claim)[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two nozzles, 1.75 mm filament[1] | Direct-drive extruder, single, 1.75 mm filament[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Brass nozzle head. 0.4 mm stock, 0.2/0.6/0.8 mm optional[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | <=300 °C claimed[2][3] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Up to 300 °C heated build plate[1] | <=120 °C claimed[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Flexible build plates with a vacuum adsorption system[1] | Double-sided flexible magnetic RF plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling; probe technology not named[1] | 16-point automatic bed levelling per QIDI's US page; probe technology not named[3] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 16 points (QIDI's US page). Not verified against firmware[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection fitted; type and location not published[2] |
| Spool holder location & max spool size; drybox compatibility | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[2] |
| Input voltage (110/220 V, switch or auto) | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[1] | 100-240 VAC, 50/60 Hz[2] |
| Total rated power draw | 15 kW maximum[1] | 350 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; slicing is INTAMSUITE (Windows only)[1] | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 10-inch touchscreen[1] | 4.3-inch touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1] | Wi-Fi and USB. No Ethernet listed for this model[2][3] |
| Materials Support | ||
| Officially supported filament list | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[1] | Not documented |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, FCC, SGS; safety design to EN60204[1] | Not documented |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage (QIDI standard store terms)[7] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Smart 3 official US page qidiusa.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor