3D Printing InfoPrinter comparison
INTAMSYS FUNMAT HT Enhanced vs Snapmaker U1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT HT Enhanced comparisonsMore Snapmaker U1 comparisons
| Property | INTAMSYS FUNMAT HT EnhancedINDUSTRIAL | Snapmaker U1TOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | Snapmaker |
| Class | INDUSTRIAL | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Intamsys Funmat HT Enhanced, product number M-QRS-2X8E[1] | Snapmaker U1 3D Printer[2] |
| Street price (USD; dated snapshot per entry) | $6,995.00 at Top 3D Shop, reduced from $8,995.00, in stock, checked Aug 2026[1] | $849.00 against a $999.00 compare-at price on us.snapmaker.com, but the listing is marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two extruder configurations with very different ceilings: standard up to 300 °C, high-temperature up to 450 °C. A quoted "450 °C" applies only to the HT extruder. Larger siblings Funmat Pro 410 (305x305x406, 500 °C, dual nozzle) and Funmat Pro 610HT (610x508x508, 300 °C chamber) are separate machines[1][3][4] | An optional top cover changes what the machine can print: without it PLA/PETG/TPU/PVA/PCTG; with it ABS, ASA, PA, PC and PET are added; with the top cover AND a hardened-steel nozzle, carbon- and glass-fibre grades. A stated material list for the U1 is therefore meaningless without saying which configuration it refers to[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | 270 x 270 x 270 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 530 x 500 x 530 mm[1] | 584 x 499 x 730 mm[2] |
| Net weight (kg) | 167 lb (approximately 76 kg)[1] | 18.2 kg[2] |
| Enclosure: open / enclosed; panel material; door/lid | Heated, enclosed build chamber with an in-chamber camera[1] | Open as sold; a top cover is an optional accessory that raises the supported material range[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 90 °C heated chamber (manufacturer specification for an actively heated chamber)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Four independent toolheads on a changer; Snapmaker quotes a 5-second swap[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-300 mm/s print speed range (manufacturer figure)[1] | 500 mm/s maximum toolhead speed (manufacturer claim)[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 maximum (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 32 mm3/s maximum hotend flow (manufacturer claim)[2] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaping with an accelerometer, run as a calibration routine[2] |
| Extrusion Pressure Control | ||
| Pressure advance (Klipper) / linear advance (Marlin) supported? | Not documented | Pressure advance, with automatic flow compensation calibration[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Standard extruder up to 300 °C; high-temperature extruder up to 450 °C[1] | 300 °C maximum (manufacturer claim)[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Stainless steel as standard; hardened steel needed for fibre-filled grades[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C platform temperature[1] | 100 °C maximum (manufacturer claim)[2] |
| Bed surface (material, texture, coating), single/double-sided | Aluminium plate with high-borosilicate glass[1] | Flexible steel sheet with a PEI surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; probe technology not stated[1] | Mesh bed levelling. Automatic toolhead offset calibration is done by coordinate measuring[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out detection, plus air-printing detection and RFID filament recognition[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Four toolheads with auto-feed and a backup mode; toolhead swap error detection, build-plate presence and obstruction detection[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Main plus auxiliary part-cooling fans[2] |
| Electronics & Power | ||
| Total rated power draw | Not documented | Maximum input power 1150 W at 220-240 V, 400 W at 100-120 V; maximum input current 6 A / 4 A respectively[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 3.5-inch, 320 x 480 touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi 2.4 GHz (802.11b/g/n) and USB flash drive. No Ethernet listed[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | In-chamber camera[1] | 2 MP built-in chamber camera for live view[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[2] |
| Materials Support | ||
| Officially supported filament list | PEEK, PEI, PEKK, PPSU, PA/CF, PC, PC alloys, PA, ABS, carbon-fibre-filled, metal-filled, fibreglass-filled, ASA, PETG, ESD-safe, HIPS, TPU, PLA, PVA[1] | Base: PLA, PETG, TPU, PVA, PCTG. With the optional top cover: adds PET, ABS, ASA, PA, PC. With top cover and a hardened-steel nozzle: adds carbon- and glass-fibre-reinforced polymers[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | FCC and CE[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Position accuracy X/Y 12.5 um, Z 1.25 um (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat HT Enhanced product listing top3dshop.com · 2026-08 · vendor
- Snapmaker U1 product page us.snapmaker.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor