3D Printing InfoPrinter comparison
FlashForge Guider 3 vs UltiMaker Factor 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Guider 3 comparisonsMore UltiMaker Factor 4 comparisons
| Property | FlashForge Guider 3INDUSTRIAL | UltiMaker Factor 4INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | FlashForge | UltiMaker |
| Class | INDUSTRIAL | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | FlashForge Guider 3[1] | UltiMaker Factor 4[2] |
| Release date (announcement and actual shipping) | Not documented | Announced 22 April 2024, shown at HANNOVER MESSE 2024 (22-26 April) and TCT Asia (7-9 May 2024)[2] |
| Launch MSRP (USD) | Not documented | Starting at approximately $20,000[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base of a three-model series: Guider 3 (300x250x340), Guider 3 Plus (350x350x600, 250 mm/s, <50 dB, twin sealed 1 kg filament chambers) and Guider 3 Ultra (330x330x600 single-head / 300x330x600 dual-head, two extruders, 350 °C, 7-inch screen, 70 kg). Volumes and extruder counts differ across all three, so series-level spec boxes are unreliable[1][3][4] | Shares the 330 x 240 x 300 mm envelope with the UltiMaker S5, S7 and S8, which is the single most contaminated figure in UltiMaker's range. What separates the Factor 4 is the actively controlled 70 °C build volume, the climate-controlled 6-spool material station holding humidity below 15%, and HEPA filtration. UltiMaker also sells a Factor 4 Plus[2] |
| Market position: superseded? successor announced? | 3DJake shows it sold out and no longer stocked; the current FlashForge store carries the Guider 3 Ultra[1][4] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 250 x 340 mm advertised[1] | 330 x 240 x 300 mm[2] |
| Frame construction & material | Fully assembled professional chassis[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a heated chamber; 3DJake's table records "Heated chamber: Yes". Chamber temperature not published for this model[1] | Enclosed with actively controlled chamber airflow and a HEPA filter[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Build volume temperature controlled up to 70 °C with actively controlled chamber airflow (manufacturer specification)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Direct-drive dual extrusion; kinematic layout not stated in the source checked[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder, single[1] | Direct-drive dual extrusion[2] |
| Filament diameter | Not documented | 2.85 mm[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 340 °C maximum with the high-temperature print core (manufacturer claim)[2] |
| Stock nozzle size & sizes included in box | 0.4, 0.6 and 0.8 mm nozzles available[1] | Not documented |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Not documented | Automatic climate-controlled material handling and storage station holding humidity below 15%, storing up to six spools[2] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | HEPA filter[2] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Wi-Fi, LAN[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | 1.75 mm filament; 3DJake does not publish a per-material list for the base Guider 3[1] | UltiMaker-branded PPS CF, PLA, Tough PLA, Nylon, PETG, PET CF and PVA, plus validated third-party materials from BASF Forward AM, Kimya, Polymaker, LEHVOSS and Jabil[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy within +/-0.2 mm or +/-0.2% of feature nominal length; UltiMaker states it tested over 95% print-completion success. Manufacturer figures, not independent measurements[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- FlashForge Guider 3 technical data table 3djake.com · 2026-08 · vendor
- UltiMaker Factor 4: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- FlashForge Guider 3 Plus technical data table 3djake.com · 2026-08 · vendor
- Flashforge Guider 3 Ultra product page (refurbished listing) flashforge.com · 2026-08 · vendor