3D Printing InfoPrinter comparison
FlashForge Guider 3 Plus vs Stratasys F370
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Guider 3 Plus comparisonsMore Stratasys F370 comparisons
| Property | FlashForge Guider 3 PlusINDUSTRIAL | Stratasys F370INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Stratasys |
| Class | INDUSTRIAL | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | FlashForge Guider 3 Plus[1] | Stratasys F370, part of the Stratasys F123 Series[2] |
| Release date (announcement and actual shipping) | Not documented | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the Guider 3 (300x250x340) and distinct from the Guider 3 Ultra, which is dual-extruder, 330x330x600 and 350 °C. Guider 3 Plus is single-extruder and quoted at 250 mm/s[1][3][4] | Top of the series and the only one with ABS-ESD7, PC-ABS and Diran 410MF07, an Insight software licence, and ProtectAM with US DoD STIG compliance on Red Hat Enterprise Linux. Cabinet and weight are identical to the F170 and F270, so footprint tells you nothing about which model you have[2] |
| Market position: superseded? successor announced? | 3DJake shows it sold out and no longer stocked[1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 600 mm advertised[1] | 355 x 254 x 355 mm (14 x 10 x 14 in)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 1,626 x 864 x 711 mm (64 x 34 x 28 in)[2] |
| Net weight (kg) | Not documented | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[2] |
| Frame construction & material | Fully assembled professional chassis. Z axis runs on 16 mm guides with 16 mm TBI ball screws on both sides; the platform is rated to carry 30 kg[1] | Fully enclosed office/classroom-grade cabinet, factory assembled[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed, with HEPA 13 air filtration and two sealed filament chambers of 1 kg each[1] | Enclosed build chamber[2] |
| Kinematics & Motion Hardware | ||
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double Z-axis ball screw, 16 mm TBI on both sides, on 16 mm guides[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s maximum (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder, single[1] | Not documented |
| Hotend & Nozzle | ||
| Stock nozzle size & sizes included in box | 0.4, 0.6 and 0.8 mm nozzles available[1] | Not documented |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Two sealed filament chambers, 1 kg per chamber[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | HEPA 13 filtration[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[2] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Wi-Fi, LAN[1] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, nylon, PETG, PC, ASA, and glass/carbon-fibre reinforced grades[1] | PLA, ABS-ESD7, ABS-M30, ASA, Diran 410MF072, FDM TPU 92A, PC-ABS, ABS-CF10, with QSR soluble support. Diran and PLA use breakaway rather than soluble support[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Less than 50 dB claimed by the manufacturer. No independent measurement; distance and method not stated[1] | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- FlashForge Guider 3 Plus technical data table 3djake.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- FlashForge Guider 3 technical data table 3djake.com · 2026-08 · vendor
- Flashforge Guider 3 Ultra product page (refurbished listing) flashforge.com · 2026-08 · vendor