3D Printing InfoPrinter comparison
FlashForge Creator 5 vs Formlabs Form 4L
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 5 comparisonsMore Formlabs Form 4L comparisons
| Property | FlashForge Creator 5TOOLCHANGER | Formlabs Form 4LRESIN |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Formlabs |
| Class | TOOLCHANGER | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 5, sold as "Creator 5 4-Toolheads Multi-Color 3D Printer"[1][2] | Formlabs Form 4L[3] |
| Release date (announcement and actual shipping) | Announced with a $10 deposit programme; shipping to deposit backers by 19 May 2026. One secondary source puts general release in early May 2026[4][5] | Not documented |
| Launch MSRP (USD) | $649 early-bird (deposit price, open until 20 June 2026); $799 standard MSRP[4][5] | Not documented |
| Street price (USD; dated snapshot per entry) | $799.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the Creator 5 Pro at $949, which adds a sealed enclosure, 65 °C active chamber heating and HEPA13 + carbon filtration. Motion system, 256 mm build volume, four toolheads, 600 mm/s and 30,000 mm/s2 are the same on both, so enclosure and chamber are the only reliable discriminators[1][6][4][5][2] | Same Low Force Display engine as the Form 4 but a different machine on every physical figure: 353 x 196 x 350 mm vs 200 x 125 x 210, 46 um vs 50 um pixels, 58.5 kg vs 18.3 kg, 900 W vs 480 W, two resin cartridges vs one. Formlabs lists Basic, Premium and Complete packages, whose prices are not printer-only prices, and no printer-only USD figure was found on a live listing[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm[4][5][7] | 353 x 196 x 350 mm (Formlabs quotes 24.2 litres)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 664 x 528 x 794 mm[3] |
| Net weight (kg) | Not documented | 58.5 kg[3] |
| Frame construction & material | CoreXY frame; FlashForge does not publish a frame-material breakdown and no dimensions or weight have been published for this model[4][5] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame. No enclosure, no chamber heating and no filtration[4][5][7] | Enclosed cabinet with a UV-blocking cover. Operating temperature 18-28 C[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with four independent toolheads on a FlashSwap changer. FlashForge claims a physical head swap in about 7 seconds[4][5][7] | Masked stereolithography (MSLA) with the Low Force Display engine; straight-lift peel[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum, reported by both secondary sources as a travel-speed figure (manufacturer claim)[4][5] | Not documented |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 maximum (manufacturer claim)[4][5] | Not documented |
| Hotend & Nozzle | ||
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel nozzles as standard[4][5] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum (manufacturer claim)[4][5] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Fully automatic calibration and levelling; FlashForge does not name the probe technology[1] | Not documented |
| Filament Handling & Detection | ||
| Multi-material/multi-color capability or official upgrade path | Four independent toolheads swapped physically rather than shared through one nozzle, which FlashForge markets as zero purge waste and up to 500% faster multi-colour printing[1][4] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 9 A, 50/60 Hz, 900 W[3] |
| Total rated power draw | Not documented | 900 W[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[5] | Proprietary; print preparation is PreForm[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 7-inch interactive touchscreen, 1280 x 800 (control panel — not the masking LCD, see W1)[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[4][5] | Dual-band Wi-Fi, Gigabit Ethernet, USB-C 2.0[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera at 30 fps. A camera module is also sold separately at $29.90, so verify whether a given SKU ships with it[4][5][2] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | Formlabs resin range as for the Form 4; biocompatible materials require a B-series machine[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XY dimensional tolerance +/-0.15% — a manufacturer specification[3] |
| Resin & MSLA | ||
| Masking LCD | Not documented | Low Force Display masking LCD with a 46 um pixel size. Formlabs does not publish the screen diagonal or pixel count[3] |
| Light source | Not documented | Backlight unit with uniform-wavelength LEDs behind collimating lenses, with integrated cooling[3] |
| Layer height range | Not documented | 25-200 um[3] |
| Resin vat & feeding | Not documented | Two next-generation resin cartridges. No vat capacity published[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 5 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Formlabs resin printer technical specifications (Form 4 / 4B / 4L) formlabs.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review