3D Printing InfoPrinter comparison
FlashForge Creator 5 Pro vs UltiMaker Factor 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 5 Pro comparisonsMore UltiMaker Factor 4 comparisons
| Property | FlashForge Creator 5 ProTOOLCHANGER | UltiMaker Factor 4INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | FlashForge | UltiMaker |
| Class | TOOLCHANGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[1][2] | UltiMaker Factor 4[3] |
| Release date (announcement and actual shipping) | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[4][5] | Announced 22 April 2024, shown at HANNOVER MESSE 2024 (22-26 April) and TCT Asia (7-9 May 2024)[3] |
| Launch MSRP (USD) | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[4][5] | Starting at approximately $20,000[3] |
| Street price (USD; dated snapshot per entry) | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[1][4][5] | Shares the 330 x 240 x 300 mm envelope with the UltiMaker S5, S7 and S8, which is the single most contaminated figure in UltiMaker's range. What separates the Factor 4 is the actively controlled 70 °C build volume, the climate-controlled 6-spool material station holding humidity below 15%, and HEPA filtration. UltiMaker also sells a Factor 4 Plus[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm[4][5][6] | 330 x 240 x 300 mm[3] |
| Frame construction & material | Rigid frame with a fully sealed enclosure; no dimensions or weight published[1][5] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[1][4][5] | Enclosed with actively controlled chamber airflow and a HEPA filter[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[1][4][5] | Build volume temperature controlled up to 70 °C with actively controlled chamber airflow (manufacturer specification)[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with four independent FlashSwap toolheads[4][5] | Direct-drive dual extrusion; kinematic layout not stated in the source checked[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum (manufacturer claim)[1][4][5] | Not documented |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 maximum (manufacturer claim)[4][5] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct-drive dual extrusion[3] |
| Filament diameter | Not documented | 2.85 mm[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 340 °C maximum with the high-temperature print core (manufacturer claim)[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel nozzles as standard[4][5] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum (manufacturer claim)[5] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Fully automatic calibration and levelling; probe technology not named[1] | Not documented |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Not documented | Automatic climate-controlled material handling and storage station holding humidity below 15%, storing up to six spools[3] |
| Multi-material/multi-color capability or official upgrade path | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[1][4] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[1][4][5] | HEPA filter[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[5] | Not documented |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[4][5] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera at 30 fps[4][5] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | UltiMaker-branded PPS CF, PLA, Tough PLA, Nylon, PETG, PET CF and PVA, plus validated third-party materials from BASF Forward AM, Kimya, Polymaker, LEHVOSS and Jabil[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[4] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy within +/-0.2 mm or +/-0.2% of feature nominal length; UltiMaker states it tested over 95% print-completion success. Manufacturer figures, not independent measurements[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- UltiMaker Factor 4: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review