3D Printing InfoPrinter comparison
FlashForge Creator 5 Pro vs QIDI Plus5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 5 Pro comparisonsMore QIDI Plus5 comparisons
| Property | FlashForge Creator 5 ProTOOLCHANGER | QIDI Plus5COREXY |
|---|---|---|
| Identity | ||
| Brand | FlashForge | QIDI |
| Class | TOOLCHANGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[1][2] | QIDI Plus5, sold as "QIDI Plus5 3D Printer"[3][4] |
| Release date (announcement and actual shipping) | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[5][6] | Launched 5 August 2026, 09:00 EDT / 15:00 CEST[7] |
| Launch MSRP (USD) | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[5][6] | $749 regular launch price; a launch-window member discount put it under $700[7] |
| Street price (USD; dated snapshot per entry) | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[1][2] | $749.00 for the standard model on us.qidi3d.com, checked Aug 2026. Other variants: Polar Cooler bundle $899.00, Plus5 Combo $899.00, Combo + Polar Cooler $1,049.00. No compare-at price listed[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[1][5][6] | Four purchase variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), and Combo + Polar Cooler. The Polar Cooler is a pre-sale add-on shipping separately, so its specs are not Plus5 specs. Replaces the Plus4 (305x305x280, 450 W + 400 W chamber)[3][7] |
| Market position: superseded? successor announced? | Not documented | Current flagship of QIDI's large-format line as of Aug 2026; sits below the Max4 (390x390x340)[3][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm[5][6][9] | 320 x 320 x 300 mm advertised — QIDI states this is about 18% more volume than the Plus4[3][4][7] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 500 x 488 x 558 mm[4] |
| Net weight (kg) | Not documented | 29.0 kg net[4] |
| Frame construction & material | Rigid frame with a fully sealed enclosure; no dimensions or weight published[1][6] | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[1][5][6] | Fully enclosed, with a 3-stage air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[3][4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[1][5][6] | 65 °C, actively heated, 550 W chamber heater — reported as a 37.5% increase in heater power over the Plus4 (manufacturer claim)[4][7] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with four independent FlashSwap toolheads[5][6] | CoreXY[4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | High-precision linear rails on X[3][7] |
| Belts (type, width, e.g. Gates?) | Not documented | 1.5GT belts, 9 mm wide — wider than the 2GT 6 mm belts common in this class[3][7] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum (manufacturer claim)[1][5][6] | 600 mm/s (manufacturer claim)[4] |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 maximum (manufacturer claim)[5][6] | <=20,000 mm/s2 (manufacturer claim)[4] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Resonance compensation listed as a feature; implementation not named on the product page[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct drive with hardened dual gears[4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating-plate hotend with a bimetal nozzle; 0.4 mm standard, 0.2/0.6/0.8 mm optional[4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=370 °C claimed[3][4] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel nozzles as standard[5][6] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum (manufacturer claim)[6] | <=120 °C claimed, described by QIDI as an even-heating bed[3][4] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Aluminium silicone heated bed with a dual-sided textured PEI plate[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Fully automatic calibration and levelling; probe technology not named[1] | Automatic levelling using an integrated load cell; QIDI describes it as direct nozzle-contact detection[4][7] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor, plus a filament cutter[4] |
| Multi-material/multi-color capability or official upgrade path | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[1][5] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[1][5][6] | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon; QIDI claims 99.5% capture of airborne particles and dust[3][4][7] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100/240 VAC, 50/60 Hz[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[6] | Not stated on the product page. QIDI's slicer ecosystem is QIDI Studio, and Orca/PrusaSlicer are listed as supported[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4-inch touchscreen, 480 x 320[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[5][6] | Wi-Fi 2.4 GHz / 5 GHz, Ethernet, USB; 32 GB eMMC storage plus USB 2.0 flash drive[4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera at 30 fps[5][6] | AI camera with failure detection, up to 1080p, timelapse supported (low frame rate)[3][4][7] |
| LED chamber/toolhead lighting | Not documented | RGB status light[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[4] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, ABS, ASA, PETG, TPU, PA, PC, carbon- and glass-fibre-reinforced polymers[4] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[5] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | QIDI store terms: 1-year coverage, lifetime tech guidance, 14-day no-reason return[8] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus5 technical data table 3djake.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review