3D Printing InfoPrinter comparison
FlashForge Creator 5 Pro vs QIDI Plus4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 5 Pro comparisonsMore QIDI Plus4 comparisons
| Property | FlashForge Creator 5 ProTOOLCHANGER | QIDI Plus4COREXY |
|---|---|---|
| Identity | ||
| Brand | FlashForge | QIDI |
| Class | TOOLCHANGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[1][2] | QIDI Plus4, sold as "Plus4 3D Printer". QIDI's own wiki files it under X-Plus4[3][4] |
| Release date (announcement and actual shipping) | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[5][6] | Announced September 2024; QIDI ran launch promotional pricing in the week of 20-27 September 2024 (secondary reporting, not a QIDI press release)[7] |
| Launch MSRP (USD) | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[5][6] | Not documented |
| Street price (USD; dated snapshot per entry) | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[1][2] | $649.00 on us.qidi3d.com for the Plus4 + 1 filament variant against a $799.00 compare-at price; $699.00 on qidi3d.com against $799.00. Checked Aug 2026[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[1][5][6] | Two purchasable variants: Plus4 + Filament x1 at $649 and Plus4 Combo + Filament x1 at $799 (Combo adds the QIDI Box multi-material unit). Distinct from the older X-Plus 3 (280x280x270, 350 °C) and from the newer Plus5 (320x320x300)[4][3] |
| Market position: superseded? successor announced? | Not documented | Superseded at the top of the large-format line by the Plus5, launched 5 August 2026 with 18% more build volume; Plus4 still listed and in stock Aug 2026[8][9] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm[5][6][10] | 305 x 305 x 280 mm advertised. No independently measured usable envelope found[3][7] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 505 x 487 x 550 mm[7] |
| Net weight (kg) | Not documented | 32 kg gross (3DJake). QIDI does not publish a net weight on the product page[7] |
| Frame construction & material | Rigid frame with a fully sealed enclosure; no dimensions or weight published[1][6] | Enclosed CoreXY chassis with double-layer chamber insulation; QIDI does not publish a frame material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[1][5][6] | Fully enclosed, double-layer insulated chamber with second-generation active heating to 65 °C[3][7] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[1][5][6] | 65 °C, actively heated by a 400 W heater which QIDI says reaches setpoint in about 8 minutes (manufacturer claim)[3][7] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with four independent FlashSwap toolheads[5][6] | CoreXY[7] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual independent Z motors on 10 mm linear shafts and screws[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum (manufacturer claim)[1][5][6] | 600 mm/s (manufacturer claim, tool-head maximum)[7] |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 maximum (manufacturer claim)[5][6] | <=20,000 mm/s2 (manufacturer claim)[7] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct drive with hardened steel dual gears, 1.75 mm filament[3][7] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Second-generation 80 W bimetal hotend with a multi-metal composite hardened-tip nozzle; 0.4 mm standard, 0.2/0.5/0.8 mm optional[3][7] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=370 °C claimed. No firmware max_temp verified for this model[3][7] |
| Heater cartridge power (W) | Not documented | 80 W hotend heater (manufacturer figure)[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel nozzles as standard[5][6] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum (manufacturer claim)[6] | Conflicting manufacturer figures: QIDI's own Plus4 page states a 100 °C bed temperature, 3DJake's spec table states <=120 °C. Not resolved; the lower vendor-published figure is used as the sortable value[3][7] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | 6 mm aluminium-substrate heated bed with a double-sided textured PEI plate[3][7] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Fully automatic calibration and levelling; probe technology not named[1] | Full-auto calibration; QIDI markets "hands-free automatic" levelling and does not name the probe technology on the product page[3][7] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor, plus a filament cutter and filament tangle detection (tangle mechanism not described)[7] |
| Multi-material/multi-color capability or official upgrade path | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[1][5] | QIDI Box multi-material unit supported; sold bundled as the Plus4 Combo[3][4] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Auxiliary part-cooling fan plus a chamber circulation fan; fan sizes and duct design not published[7] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[1][5][6] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[7] |
| Total rated power draw | Not documented | 450 W plus 400 W for chamber heating (rated)[7] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[6] | Klipper v0.12, described by QIDI as open source. Fork details and current release not published on the product page[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch touchscreen, 800 x 480[3][7] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[5][6] | Wi-Fi 2.4 GHz, Ethernet, USB[3][7] |
| Cloud service & phone app; LAN-only mode possible? | Not documented | Mobile and computer control, remote cloud or LAN-only operation[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera at 30 fps[5][6] | Built-in low-frame-rate camera, up to 1080p, timelapse supported[3][7] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | QIDI claims about 10 minutes from unbox to printing[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[7] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, ABS, ASA, PETG, TPU, PA, PC, PA-CF/GF, PET-CF/GF, PPA-CF/GF, PPS-CF and other CF/GF-filled polymers[3][7] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[5] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage, 14-day no-reason return, 30-day price protection[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- QIDI Plus4 product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Plus4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- QIDI Tech Plus4 technical data table 3djake.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review