3D Printing InfoPrinter comparison
FlashForge Creator 4 vs QIDI Plus5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 4 comparisonsMore QIDI Plus5 comparisons
| Property | FlashForge Creator 4IDEX | QIDI Plus5COREXY |
|---|---|---|
| Identity | ||
| Brand | FlashForge | QIDI |
| Class | IDEX | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[1] | QIDI Plus5, sold as "QIDI Plus5 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Not documented | Launched 5 August 2026, 09:00 EDT / 15:00 CEST[4] |
| Launch MSRP (USD) | Not documented | $749 regular launch price; a launch-window member discount put it under $700[4] |
| Street price (USD; dated snapshot per entry) | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[1] | $749.00 for the standard model on us.qidi3d.com, checked Aug 2026. Other variants: Polar Cooler bundle $899.00, Plus5 Combo $899.00, Combo + Polar Cooler $1,049.00. No compare-at price listed[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[1] | Four purchase variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), and Combo + Polar Cooler. The Polar Cooler is a pre-sale add-on shipping separately, so its specs are not Plus5 specs. Replaces the Plus4 (305x305x280, 450 W + 400 W chamber)[2][4] |
| Market position: superseded? successor announced? | Not documented | Current flagship of QIDI's large-format line as of Aug 2026; sits below the Max4 (390x390x340)[2][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 400 x 350 x 500 mm[1] | 320 x 320 x 300 mm advertised — QIDI states this is about 18% more volume than the Plus4[2][3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[1] | 500 x 488 x 558 mm[3] |
| Net weight (kg) | 90 kg net[1] | 29.0 kg net[3] |
| Frame construction & material | Fully enclosed professional chassis on a stand[1] | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[1] | Fully enclosed, with a 3-stage air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively controlled (manufacturer claim)[1] | 65 °C, actively heated, 550 W chamber heater — reported as a 37.5% increase in heater power over the Plus4 (manufacturer claim)[3][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | IDEX — two independently driven extruders on the same gantry[1] | CoreXY[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | High-precision linear rails on X[2][4] |
| Belts (type, width, e.g. Gates?) | Not documented | 1.5GT belts, 9 mm wide — wider than the 2GT 6 mm belts common in this class[2][4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[1] | 600 mm/s (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | Not documented | <=20,000 mm/s2 (manufacturer claim)[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Resonance compensation listed as a feature; implementation not named on the product page[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[1] | Direct drive with hardened dual gears[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating-plate hotend with a bimetal nozzle; 0.4 mm standard, 0.2/0.6/0.8 mm optional[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[1] | <=370 °C claimed[2][3] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 130 °C maximum (manufacturer claim)[1] | <=120 °C claimed, described by QIDI as an even-heating bed[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Aluminium silicone heated bed with a dual-sided textured PEI plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[1] | Automatic levelling using an integrated load cell; QIDI describes it as direct nozzle-contact detection[3][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor, plus a filament cutter[3] |
| Spool holder location & max spool size; drybox compatibility | Two spool bays, 1 kg and 2 kg capacity[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon; QIDI claims 99.5% capture of airborne particles and dust[2][3][4] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[1] | 100/240 VAC, 50/60 Hz[3] |
| Total rated power draw | 2320 W rated[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named; the supported slicer is FlashPrint[1] | Not stated on the product page. QIDI's slicer ecosystem is QIDI Studio, and Orca/PrusaSlicer are listed as supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen, 1024 x 600[1] | 4-inch touchscreen, 480 x 320[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB flash drive, Ethernet, Wi-Fi[1] | Wi-Fi 2.4 GHz / 5 GHz, Ethernet, USB; 32 GB eMMC storage plus USB 2.0 flash drive[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | AI camera with failure detection, up to 1080p, timelapse supported (low frame rate)[2][3][4] |
| LED chamber/toolhead lighting | Not documented | RGB status light[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[3] |
| Materials Support | ||
| Officially supported filament list | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[1] | PLA, ABS, ASA, PETG, TPU, PA, PC, carbon- and glass-fibre-reinforced polymers[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on the printer, 3 months on extruder parts[1] | QIDI store terms: 1-year coverage, lifetime tech guidance, 14-day no-reason return[5] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus5 technical data table 3djake.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor