3D Printing InfoPrinter comparison
FlashForge Creator 4 vs Prusa CORE One+ (Gen 2) INDX
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 4 comparisonsMore Prusa CORE One+ (Gen 2) INDX comparisons
| Property | FlashForge Creator 4IDEX | Prusa CORE One+ (Gen 2) INDXTOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Prusa Research |
| Class | IDEX | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[1] | Prusa CORE One+ (Gen 2) INDX, listed as "INDX 4-Tool" and "INDX 8-Tool" variants and as an "INDX 8-Tool Assembly kit"[2][3] |
| Release date (announcement and actual shipping) | Not documented | Announced as shipping on 20 August 2026 ("INDX, Shipping Has Started, Complete Printers Open for Orders"). Prusa's own front page in Aug 2026 announces "Prusa CORE One+ (Gen 2) INDX, Shipping Has Started, Complete Printers Open for Orders", with the assembled 8-tool machine quoted as shipping from 15 October and the kit from 29 October[4][2] |
| Street price (USD; dated snapshot per entry) | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[1] | $1,850.93 for the INDX 4-Tool and $2,082.41 for the INDX 8-Tool on prusa3d.com, Aug 2026; the 8-Tool assembly kit is $1,804.63. Camera and filtration bundles run to $2,152.78[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[1] | INDX is a multi-tool option on the CORE One+ (Gen 2) product page rather than a separate printer, sold in 4-tool and 8-tool configurations, plus a CORE One/+ INDX conversion kit for existing machines. All of the body, hotend, bed and electronics figures below come from that shared CORE One+ (Gen 2) page and were not published separately for the INDX machine, so treat them as platform figures. Prusa also sells the unrelated MMU3, which multiplexes five filaments through one nozzle[3][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 400 x 350 x 500 mm[1] | 250 x 220 x 270 mm - the CORE One+ (Gen 2) figure from the shared product page; Prusa does not publish a separate INDX build volume[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[1] | 415 x 444 x 555 mm - shared CORE One+ (Gen 2) figure[3] |
| Net weight (kg) | 90 kg net[1] | Not documented |
| Frame construction & material | Fully enclosed professional chassis on a stand[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[1] | Fully enclosed with active chamber heating up to 55 C (shared CORE One+ platform)[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively controlled (manufacturer claim)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | IDEX — two independently driven extruders on the same gantry[1] | CoreXY with a multi-tool head-changing system (INDX); Prusa's comparison table gives CoreXY for the CORE One family[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[1] | Nextruder direct drive, 10:1 planetary gearbox (shared platform)[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[1] | 290 C claimed max nozzle temperature, 400 C with the optional HT hotend (shared platform)[3] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 130 °C maximum (manufacturer claim)[1] | 120 C max heatbed temperature (shared platform)[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[1] | Load-cell sensor, fully automatic first-layer calibration (shared platform)[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensors fitted (two on the CORE One+ platform)[3] |
| Spool holder location & max spool size; drybox compatibility | Two spool bays, 1 kg and 2 kg capacity[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Not documented | INDX gives up to eight filaments; the alternative MMU3 handles five through a single nozzle[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Custom 32-bit xBuddy board with STM32 (shared platform)[3] |
| Input voltage (110/220 V, switch or auto) | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[1] | Not documented |
| Total rated power draw | 2320 W rated[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named; the supported slicer is FlashPrint[1] | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[5][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen, 1024 x 600[1] | 3.5-inch 65k-colour touch screen (shared platform)[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB flash drive, Ethernet, Wi-Fi[1] | Ethernet and Wi-Fi, USB drive (shared platform)[3] |
| Materials Support | ||
| Officially supported filament list | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[1] | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB; ABS, ASA, HIPS and PA as advanced materials in the heated chamber (shared platform)[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on the printer, 3 months on extruder parts[1] | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[7][6] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- Prusa blog - Prusa CORE One+ (Gen 2) INDX, Shipping Has Started, Complete Printers Open for Orders (published 20 August 2026) blog.prusa3d.com · 2026-08 · doc
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc