3D Printing InfoPrinter comparison
FlashForge Creator 4 vs INTAMSYS FUNMAT PRO 410
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 4 comparisonsMore INTAMSYS FUNMAT PRO 410 comparisons
| Property | FlashForge Creator 4IDEX | INTAMSYS FUNMAT PRO 410INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | FlashForge | INTAMSYS |
| Class | IDEX | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[1] | Intamsys Funmat Pro 410, described as a dual-extrusion PEEK 3D printer[2] |
| Street price (USD; dated snapshot per entry) | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[1] | $27,995.00 at Top 3D Shop, in stock with a 5-10 business-day lead time, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[1] | Distinguish from the 610 HT carefully: the 410 has a 90 °C chamber and 160 °C plate, the 610 HT a 300 °C chamber and 300 °C plate. Both quote a 500 °C extruder, so extruder temperature alone will not tell them apart. The 410's two nozzles are asymmetric — one fixed, one on a lift[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 400 x 350 x 500 mm[1] | 305 x 305 x 406 mm (12 x 12 x 16 in)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[1] | 720 x 680 x 1470 mm[2] |
| Net weight (kg) | 90 kg net[1] | 220 kg[2] |
| Frame construction & material | Fully enclosed professional chassis on a stand[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[1] | Enclosed heated chamber with air filtering[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively controlled (manufacturer claim)[1] | 90 °C chamber (manufacturer specification, actively heated)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | IDEX — two independently driven extruders on the same gantry[1] | Two nozzles, one fixed and one that lifts out of the way[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[1] | Not documented |
| Max travel speed | Not documented | Maximum XY travel speed 500 mm/s (manufacturer figure); maximum XY acceleration 5,000 mm/s2[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 5,000 mm/s2 maximum XY acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[1] | Two nozzles, 1.75 mm filament, with an auto-cleaning station[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[1] | 500 °C extruder temperature (manufacturer specification)[2] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | 0.4 mm default, 0.6 mm selectable[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 130 °C maximum (manufacturer claim)[1] | 160 °C platform temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Ceramic glass build plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[1] | Auto-levelling with high-precision sensors; sensor technology not named[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament jam warning and filament absence warning[2] |
| Spool holder location & max spool size; drybox compatibility | Two spool bays, 1 kg and 2 kg capacity[1] | Heated dry box for filament, up to 70 °C[2] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Air filtering fitted; media not specified. Cooling is water-cooled[2] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[1] | 200-240 V / 15 A, 50-60 Hz[2] |
| Total rated power draw | 2320 W rated[1] | 3 kW maximum[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named; the supported slicer is FlashPrint[1] | Proprietary; slicing is IntamSuite (Windows only)[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen, 1024 x 600[1] | 7-inch smart touch panel[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB flash drive, Ethernet, Wi-Fi[1] | USB, Wi-Fi, Internet[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Camera fitted[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-failure recovery supported; mechanism not published[2] |
| Materials Support | ||
| Officially supported filament list | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[1] | PEEK, PEKK, PEI, PPSU, PC, nylon, ABS, HIPS, PETG, PLA, PVA and CF-filled grades[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE, SGS, FCC[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on the printer, 3 months on extruder parts[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Resolution XY 15.6 um, Z 1.56 um (manufacturer specification)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor