3D Printing InfoPrinter comparison
FlashForge Adventurer 5M Pro vs Stratasys F120
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Adventurer 5M Pro comparisonsMore Stratasys F120 comparisons
| Property | FlashForge Adventurer 5M ProCOREXY | Stratasys F120INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Stratasys |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Adventurer 5M Pro; FlashForge's own spec table gives the machine name as "Adventurer 5M PRO" and the store abbreviates it AD5M Pro[1][2] | Stratasys F120, part of the Stratasys F123 Series[3] |
| Release date (announcement and actual shipping) | Not documented | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[3] |
| Street price (USD; dated snapshot per entry) | $449.00 sale against a $599.00 regular price on flashforge.com, in stock, with a further $80 auto-applied in cart, checked Aug 2026. FlashForge's own product feed lists the first variant at $399.00, so the price you see depends on the variant selected. A refurbished AD5M Pro is listed at $339.00[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed sibling of the open-frame Adventurer 5M (same 220 mm cube, same 280 °C nozzle, same 600 mm/s, but 100 °C bed vs 110 °C and no filtration). Also distinct from the AD5X, which shares the chassis but has a 300 °C nozzle, a 4-colour IFS unit and no air filtration. Refurbished units of all three are sold separately[1][4][5][2] | The F120 is the odd one out in the series: smaller cabinet (889 x 870 x 721 mm, 124 kg vs 1,626 x 864 x 711 mm, 227 kg), two external material coil boxes rather than internal spool bays, only two model materials, and no 0.127 mm layer option. Same build size as the F170 but not the same machine[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][6] | 254 x 254 x 254 mm (10 x 10 x 10 in)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 380 x 400 x 453 mm excluding the spool holder[1][6] | 889 x 870 x 721 mm (35 x 35 x 29 in)[3] |
| Net weight (kg) | Not documented | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[3] |
| Frame construction & material | All-metal CoreXY structure (FlashForge writes it "CoXY")[1] | Fully enclosed office/classroom-grade cabinet, factory assembled[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed. Dual-layer HEPA plus activated-carbon filtration on both internal and external circulation; FlashForge claims 99% capture of particles and VOCs[1][6] | Enclosed build chamber[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1][7] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum travel speed (FlashForge's own table labels the 600 mm/s figure "Max Travel Speed", not print speed)[1][6] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][6] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder[1][6] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 280 °C claimed[1][6] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: FlashForge's own spec table says 100 °C platform temperature, 3DJake's table says 110 °C. Lower vendor figure used as the sortable value[1][6] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Flexible removable PEI-coated spring-steel plate[1][6] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; FlashForge does not name the probe technology on the product page[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Internal plus external circulation with a HEPA and activated-carbon filter[1][6] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | AC 100-120 V / 200-240 V, 50/60 Hz[1][6] | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[3] |
| Total rated power draw | 350 W rated[1][6] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch screen[1][6] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1][6] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera monitoring listed; resolution and framerate not published[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery, plus automatic shutdown[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG on the 0.4 mm nozzle; ABS/ASA; TPU, PLA-CF and PETG-CF on 0.6/0.8 mm nozzles[1] | ABS-M30 and ASA, with SR-30 support material. Notably the F120 does NOT get PLA, FDM TPU 92A or ABS-CF10, and cannot use the 0.127 mm layer height[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only, no independent measurement: 50 dB in low-noise mode, 55 dB in standard mode. Distance and method not stated[1] | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | FlashForge's Adventurer 5M page states a 12-month limited warranty for that model; the 5M Pro page does not restate it[4] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- Flashforge Adventurer 5M product page flashforge.com · 2026-08 · vendor
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- FlashForge Adventurer 5M Pro technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review